On 04/04/17 19:06, Christopher Bostic wrote: > From: Chris Bostic <[email protected]> > > Create a simple SCOM engine device driver that reads and writes > its control registers via an FSI bus. > > Includes changes from Edward A. James <[email protected]>. > > Signed-off-by: Chris Bostic <[email protected]> > Signed-off-by: Joel Stanley <[email protected]> > Signed-off-by: Edward A. James <[email protected]> > Signed-off-by: Jeremy Kerr <[email protected]> > --- > drivers/fsi/Kconfig | 6 ++ > drivers/fsi/Makefile | 1 + > drivers/fsi/fsi-scom.c | 263 > +++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 270 insertions(+) > create mode 100644 drivers/fsi/fsi-scom.c > > diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig > index 9cf8345..0fa265c 100644 > --- a/drivers/fsi/Kconfig > +++ b/drivers/fsi/Kconfig > @@ -18,6 +18,12 @@ config FSI_MASTER_GPIO > ---help--- > This option enables a FSI master driver using GPIO lines. > > +config FSI_SCOM > + tristate "SCOM FSI client device driver" > + depends on FSI
depends on FSI is redundant. > + ---help--- > + This option enables an FSI based SCOM device driver. > + > endif > -- ~Randy
