Hi Heiko,
On 04/12/2017 09:29 PM, Heiko Stuebner wrote:
Hi Kever,
Am Montag, 10. April 2017, 11:50:13 CEST schrieb Kever Yang:
Firefly-rk3399 is a bord from T-Firefly, you can find detail about
it here:
http://en.t-firefly.com/en/firenow/Firefly_RK3399/
This patch add basic node for the board and make it able to bring
up.
Peripheral works:
- usb hub which connect to ehci controller;
- UART2 debug
- eMMC
- PCIe
Not work:
- USB 3.0 HOST, type-C port
- sdio, sd-card
Not test for other peripheral:
- HDMI
- Ethernet
- OPTICAL
- WiFi/BT
- MIPI CSI/DSI
- IR
- EDP/DP
Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
applied for 4.13, as we're a bit late for 4.12, with the following changes:
Thanks for your help, I'm not familiar with the devices status on upstream
because not working on kernel upstream for a long time.
- commit subject
- dropped status from backlight (as there is no disabled common node
and it's specific to the firefly itself)
- quite some reordering of properties
- reordered regulator nodes per their addresses: 0x1b < 0x40
- dropped obsolete regulator-compatible properties
- fixed gpio-irq on the mpu6500
- dropped out-of-tree orientation properties of mpu6500
--> please provide the optional "mount-matrix" in a follow-up patch
see bindings/iio/imu/inv_mpu6050.txt
Maybe we can drop this mpu6050 node first? I can't find binding file for it.
- dropped rockchip,i2s-broken-burst-len;
That change never made it into the mainline kernel
- fixed pcie pinctrl indentation
- dropped wireless-bluetooth uart-gpios pinctrl
- dropped supports-emmc property
Please try to be a bit more careful when porting stuff from device kernels
with respect to properties not found in the mainline kernel and please
also double-check in [0] that I didn't break anything.
I have test this patch on my firefly-rk3399, it works fine with pwm2
regulator
init in U-Boot.
Thanks,
- Kever
Thanks
Heiko
[0]
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=495a3c891a696b62465d71b1a125e3424352028b
