The SPI controller configuration during the init can be reused, for the resume function for example.
Let's move this configuration to a separate function. Signed-off-by: Quentin Schulz <[email protected]> Acked-by: Nicolas Ferre <[email protected]> --- drivers/spi/spi-atmel.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 0e7712b..247d920 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1464,6 +1464,25 @@ static int atmel_spi_gpio_cs(struct platform_device *pdev) return 0; } +static void atmel_spi_init(struct atmel_spi *as) +{ + spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ + if (as->caps.has_wdrbt) { + spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS) + | SPI_BIT(MSTR)); + } else { + spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); + } + + if (as->use_pdc) + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); + spi_writel(as, CR, SPI_BIT(SPIEN)); + + if (as->fifo_size) + spi_writel(as, CR, SPI_BIT(FIFOEN)); +} + static int atmel_spi_probe(struct platform_device *pdev) { struct resource *regs; @@ -1572,26 +1591,14 @@ static int atmel_spi_probe(struct platform_device *pdev) as->spi_clk = clk_get_rate(clk); - spi_writel(as, CR, SPI_BIT(SWRST)); - spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ - if (as->caps.has_wdrbt) { - spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS) - | SPI_BIT(MSTR)); - } else { - spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); - } - - if (as->use_pdc) - spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); - spi_writel(as, CR, SPI_BIT(SPIEN)); - as->fifo_size = 0; if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size", &as->fifo_size)) { dev_info(&pdev->dev, "Using FIFO (%u data)\n", as->fifo_size); - spi_writel(as, CR, SPI_BIT(FIFOEN)); } + atmel_spi_init(as); + pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_active(&pdev->dev); -- 2.9.3
