On 04/12/2017 07:47 PM, Luis Oliveira wrote:
- Changes in Kconfig to enable I2C_DESIGNWARE_SLAVE support - Slave functions added to core library file - Slave abort sources added to common source file - New driver: i2c-designware-slave added - Changes in the Makefile to compile the I2C_DESIGNWARE_SLAVE module when supported by the architecture.All the SLAVE flow is added but it is not enabled via platform driver. Signed-off-by: Luis Oliveira <loli...@synopsys.com> --- v7-v8 - no changes drivers/i2c/busses/Kconfig | 14 +- drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-designware-common.c | 6 + drivers/i2c/busses/i2c-designware-core.h | 2 + drivers/i2c/busses/i2c-designware-slave.c | 403 +++++++++++++++++++++++++++++ 5 files changed, 425 insertions(+), 1 deletion(-) create mode 100644 drivers/i2c/busses/i2c-designware-slave.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 144cbadc7c72..84efa57f90b3 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -474,11 +474,23 @@ config I2C_DESIGNWARE_PLATFORM depends on (ACPI && COMMON_CLK) || !ACPI help If you say yes to this option, support will be included for the - Synopsys DesignWare I2C adapter. Only master mode is supported. + Synopsys DesignWare I2C adapter. This driver can also be built as a module. If so, the module will be called i2c-designware-platform. +config I2C_DESIGNWARE_SLAVE + bool "Synopsys DesignWare Slave" + select I2C_SLAVE + select I2C_SLAVE_EEPROM
I didn't notice this before - is there reason to select I2C_SLAVE_EEPROM? -- Jarkko
