On Thu, Apr 20, 2017 at 04:25:07PM +0530, Viresh Kumar wrote: > Compiling the DT file with W=1, DTC warns like follows: > > Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a > unit name, but no reg property > > Fix this by replacing '@' with '-' as the OPP nodes will never have a > "reg" property. > > Reported-by: Krzysztof Kozlowski <[email protected]> > Reported-by: Masahiro Yamada <[email protected]> > Suggested-by: Mark Rutland <[email protected]> > Signed-off-by: Viresh Kumar <[email protected]> > Reviewed-by: Chanwoo Choi <[email protected]> > Reviewed-by: Krzysztof Kozlowski <[email protected]> > Acked-by: Rob Herring <[email protected]> > --- > .../devicetree/bindings/devfreq/exynos-bus.txt | 46 +++++++-------- > arch/arm/boot/dts/exynos3250.dtsi | 46 +++++++-------- > arch/arm/boot/dts/exynos4210.dtsi | 32 +++++------ > arch/arm/boot/dts/exynos4412-prime.dtsi | 4 +- > arch/arm/boot/dts/exynos4412.dtsi | 66 > +++++++++++----------- > arch/arm/boot/dts/exynos5420.dtsi | 40 ++++++------- > arch/arm/boot/dts/exynos5800.dtsi | 56 +++++++++--------- > arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi | 48 ++++++++-------- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 50 ++++++++-------- > 9 files changed, 194 insertions(+), 194 deletions(-)
Thanks, split ARM64 from ARM and applied (for v4.12). arm-soc keeps DTS separated between ARM architectures. Technically this should require a resend but we had way too many resends for this simple patch. Best regards, Krzysztof
