Allow setting the AUS mode for a display from the device tree.
Use an optional boolean property. AUS mode can be set only on imx21
and compatible chipsets.
Signed-off-by: Martin Kaiser <mar...@kaiser.cx>
Acked-by: Rob Herring <r...@kernel.org>
---
re-sending v3, rebased against current linux-next
it seems this got lost along the way, there was a bit of confusion
whether to split this in two patches or not
v3:
use a boolean DT property instead of the register value
separate patches for DT binding and code changes
v2:
re-sending DT bindings and code changes as one patch
Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
index 7a5c0e2..cacae0e 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
@@ -13,6 +13,8 @@ Required nodes:
Additional, the display node has to define properties:
- bits-per-pixel: Bits per pixel
- fsl,pcr: LCDC PCR value
+ A display node may optionally define
+ - fsl,aus_mode: boolean to enable AUS mode (only for imx21)
Optional properties:
- lcd-supply: Regulator for LCD supply voltage.
--
2.1.4
