On 4/21/2017 11:55 AM, Borislav Petkov wrote:
On Tue, Apr 18, 2017 at 05:05:16PM -0600, Tyler Baicar wrote:
Add support for ARM Common Platform Error Record (CPER).
UEFI 2.6 specification adds support for ARM specific
processor error information to be reported as part of the
CPER records. This provides more detail on for processor error logs.
Signed-off-by: Tyler Baicar <tbai...@codeaurora.org>
CC: Jonathan (Zhixiong) Zhang <zjzh...@codeaurora.org>
Reviewed-by: James Morse <james.mo...@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheu...@linaro.org>
---
drivers/firmware/efi/cper.c | 135 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/cper.h | 54 ++++++++++++++++++
2 files changed, 189 insertions(+)
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index 46585f9..f959185 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -110,12 +110,15 @@ void cper_print_bits(const char *pfx, unsigned int bits,
static const char * const proc_type_strs[] = {
"IA32/X64",
"IA64",
+ "ARM",
};
static const char * const proc_isa_strs[] = {
"IA32",
"IA64",
"X64",
+ "ARM A32/T32",
+ "ARM A64",
};
static const char * const proc_error_type_strs[] = {
@@ -184,6 +187,128 @@ static void cper_print_proc_generic(const char *pfx,
printk("%s""IP: 0x%016llx\n", pfx, proc->ip);
}
+#if defined(CONFIG_ARM64) || defined(CONFIG_ARM)
+static const char * const arm_reg_ctx_strs[] = {
+ "AArch32 general purpose registers",
+ "AArch32 EL1 context registers",
+ "AArch32 EL2 context registers",
+ "AArch32 secure context registers",
+ "AArch64 general purpose registers",
+ "AArch64 EL1 context registers",
+ "AArch64 EL2 context registers",
+ "AArch64 EL3 context registers",
+ "Misc. system register structure",
+};
+
+static void cper_print_proc_arm(const char *pfx,
+ const struct cper_sec_proc_arm *proc)
+{
+ int i, len, max_ctx_type;
+ struct cper_arm_err_info *err_info;
+ struct cper_arm_ctx_info *ctx_info;
+ char newpfx[64];
+
+ printk("%ssection length: %d\n", pfx, proc->section_length);
We need to dump section length because?
I guess it's not really needed. It just may be useful considering there
can be numerous error info structures, numerous context info structures,
and a variable length vendor information section. I can move this print
to only in the length check failure cases.
+ printk("%sMIDR: 0x%016llx\n", pfx, proc->midr);
+
+ len = proc->section_length - (sizeof(*proc) +
+ proc->err_info_num * (sizeof(*err_info)));
+ if (len < 0) {
+ printk("%ssection length is too small\n", pfx);
Now here we *can* dump it.
+ printk("%sfirmware-generated error record is incorrect\n", pfx);
+ printk("%sERR_INFO_NUM is %d\n", pfx, proc->err_info_num);
+ return;
+ }
+
+ if (proc->validation_bits & CPER_ARM_VALID_MPIDR)
+ printk("%sMPIDR: 0x%016llx\n", pfx, proc->mpidr);
<---- newline here.
Also, what is MPIDR and can it be written in a more user-friendly manner
and not be an abbreviation?
+ if (proc->validation_bits & CPER_ARM_VALID_AFFINITY_LEVEL)
+ printk("%serror affinity level: %d\n", pfx,
+ proc->affinity_level);
+ if (proc->validation_bits & CPER_ARM_VALID_RUNNING_STATE) {
+ printk("%srunning state: 0x%x\n", pfx, proc->running_state);
+ printk("%sPSCI state: %d\n", pfx, proc->psci_state);
One more abbreviation. Please consider whether having the abbreviations
or actually writing them out is more user-friendly.
+ }
+
+ snprintf(newpfx, sizeof(newpfx), "%s%s", pfx, INDENT_SP);
That INDENT_SP thing is just silly, someone should kill it.
+
+ err_info = (struct cper_arm_err_info *)(proc + 1);
+ for (i = 0; i < proc->err_info_num; i++) {
+ printk("%sError info structure %d:\n", pfx, i);
+ printk("%sversion:%d\n", newpfx, err_info->version);
+ printk("%slength:%d\n", newpfx, err_info->length);
<---- newline here.
Why do we even dump version and info for *every* err_info structure?
Because these are part of the error information structure. I wouldn't
think FW would populate error information structures that are different
versions in the same processor error, but it could be possible from the
spec (at least once there are different versions of the table).
+ if (err_info->validation_bits &
+ CPER_ARM_INFO_VALID_MULTI_ERR) {
+ if (err_info->multiple_error == 0)
+ printk("%ssingle error\n", newpfx);
+ else if (err_info->multiple_error == 1)
+ printk("%smultiple errors\n", newpfx);
+ else
+ printk("%smultiple errors count:%u\n",
+ newpfx, err_info->multiple_error);
So this can be simply: "num errors: %d", err_info->multiple_error+1...
Without checking CPER_ARM_INFO_VALID_MULTI_ERR.
+ }
<---- newline here.
+ if (err_info->validation_bits & CPER_ARM_INFO_VALID_FLAGS) {
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_FIRST)
+ printk("%sfirst error captured\n", newpfx);
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_LAST)
+ printk("%slast error captured\n", newpfx);
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_PROPAGATED)
+ printk("%spropagated error captured\n",
+ newpfx);
+ if (err_info->flags & CPER_ARM_INFO_FLAGS_OVERFLOW)
+ printk("%soverflow occurred, error info is
incomplete\n",
+ newpfx);
+ }
<---- newline here.
+ printk("%serror_type: %d, %s\n", newpfx, err_info->type,
+ err_info->type < ARRAY_SIZE(proc_error_type_strs) ?
+ proc_error_type_strs[err_info->type] : "unknown");
+ if (err_info->validation_bits & CPER_ARM_INFO_VALID_ERR_INFO)
+ printk("%serror_info: 0x%016llx\n", newpfx,
+ err_info->error_info);
err_info->error_info ?
What is that supposed to mean? A u64 value of some sorts.
There is an error information 64 bit value in the ARM processor error
information structure. (UEFI spec 2.6 table 261)
+ if (err_info->validation_bits & CPER_ARM_INFO_VALID_VIRT_ADDR)
+ printk("%svirtual fault address: 0x%016llx\n",
+ newpfx, err_info->virt_fault_addr);
+ if (err_info->validation_bits &
+ CPER_ARM_INFO_VALID_PHYSICAL_ADDR)
Just let that line stick out.
+ printk("%sphysical fault address: 0x%016llx\n",
+ newpfx, err_info->physical_fault_addr);
+ err_info += 1;
+ }
<---- newline here.
That function is kinda missing newlines.
+ ctx_info = (struct cper_arm_ctx_info *)err_info;
+ max_ctx_type = ARRAY_SIZE(arm_reg_ctx_strs) - 1;
+ for (i = 0; i < proc->context_info_num; i++) {
+ int size = sizeof(*ctx_info) + ctx_info->size;
+
+ printk("%sContext info structure %d:\n", pfx, i);
+ if (len < size) {
+ printk("%ssection length is too small\n", newpfx);
+ printk("%sfirmware-generated error record is
incorrect\n", pfx);
+ return;
+ }
+ if (ctx_info->type > max_ctx_type) {
+ printk("%sInvalid context type: %d\n", newpfx,
+ ctx_info->type);
+ printk("%sMax context type: %d\n", newpfx,
+ max_ctx_type);
+ return;
You can combine those into:
printk("%sInvalid context type: %d (max: %d)\n",
newpfx, ctx_info->type, max_ctx_type);
+ }
+ printk("%sregister context type %d: %s\n", newpfx,
+ ctx_info->type, arm_reg_ctx_strs[ctx_info->type]);
Why dump the type as %d and as a string too? String should be enough, no?
Yes, the string should be sufficient.
+ print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4,
+ (ctx_info + 1), ctx_info->size, 0);
+ len -= size;
+ ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + size);
+ }
+
+ if (len > 0) {
+ printk("%sVendor specific error info has %u bytes:\n", pfx,
+ len);
+ print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4, ctx_info,
+ len, true);
That looks like it should be a debug printk...
Why's that? Dumping this vendor specific error information is similar to
the unrecognized CPER section reporting which is also meant for vendor
specific information https://lkml.org/lkml/2017/4/18/751
Thanks,
Tyler
+ }
+}
+#endif
+
static const char * const mem_err_type_strs[] = {
"unknown",
"no error",
@@ -461,6 +586,16 @@ static void cper_estatus_timestamp(const char *pfx,
cper_print_pcie(newpfx, pcie, gdata);
else
goto err_section_too_small;
+ } else if ((IS_ENABLED(CONFIG_ARM64) || IS_ENABLED(CONFIG_ARM)) &&
+ !uuid_le_cmp(*sec_type, CPER_SEC_PROC_ARM)) {
+ struct cper_sec_proc_arm *arm_err;
+
+ arm_err = acpi_hest_get_payload(gdata);
struct cper_sec_proc_arm *arm_err =
acpi_hest_get_payload(gdata);
+ printk("%ssection_type: ARM processor error\n", newpfx);
+ if (gdata->error_data_length >= sizeof(*arm_err))
+ cper_print_proc_arm(newpfx, arm_err);
+ else
+ goto err_section_too_small;
You need to build-test your patches before submitting:
drivers/firmware/efi/cper.c: In function ‘cper_estatus_print_section’:
drivers/firmware/efi/cper.c:596:4: error: implicit declaration of function
‘cper_print_proc_arm’ [-Werror=implicit-function-declaration]
cper_print_proc_arm(newpfx, arm_err);
^~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make[3]: *** [drivers/firmware/efi/cper.o] Error 1
make[2]: *** [drivers/firmware/efi] Error 2
make[1]: *** [drivers/firmware] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [drivers] Error 2
make: *** Waiting for unfinished jobs....
this is a x86 build.
} else
printk("%s""section type: unknown, %pUl\n", newpfx, sec_type);
diff --git a/include/linux/cper.h b/include/linux/cper.h
index dcacb1a..85450f3 100644
--- a/include/linux/cper.h
+++ b/include/linux/cper.h
@@ -180,6 +180,10 @@ enum {
#define CPER_SEC_PROC_IPF \
UUID_LE(0xE429FAF1, 0x3CB7, 0x11D4, 0x0B, 0xCA, 0x07, 0x00, \
0x80, 0xC7, 0x3C, 0x88, 0x81)
+/* Processor Specific: ARM */
+#define CPER_SEC_PROC_ARM \
+ UUID_LE(0xE19E3D16, 0xBC11, 0x11E4, 0x9C, 0xAA, 0xC2, 0x05, \
+ 0x1D, 0x5D, 0x46, 0xB0)
/* Platform Memory */
#define CPER_SEC_PLATFORM_MEM \
UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
@@ -255,6 +259,22 @@ enum {
#define CPER_PCIE_SLOT_SHIFT 3
+#define CPER_ARM_VALID_MPIDR 0x00000001
+#define CPER_ARM_VALID_AFFINITY_LEVEL 0x00000002
+#define CPER_ARM_VALID_RUNNING_STATE 0x00000004
+#define CPER_ARM_VALID_VENDOR_INFO 0x00000008
+
+#define CPER_ARM_INFO_VALID_MULTI_ERR 0x0001
+#define CPER_ARM_INFO_VALID_FLAGS 0x0002
+#define CPER_ARM_INFO_VALID_ERR_INFO 0x0004
+#define CPER_ARM_INFO_VALID_VIRT_ADDR 0x0008
+#define CPER_ARM_INFO_VALID_PHYSICAL_ADDR 0x0010
+
+#define CPER_ARM_INFO_FLAGS_FIRST 0x0001
+#define CPER_ARM_INFO_FLAGS_LAST 0x0002
+#define CPER_ARM_INFO_FLAGS_PROPAGATED 0x0004
+#define CPER_ARM_INFO_FLAGS_OVERFLOW 0x0008
For all of the above use BIT().
+
/*
* All tables and structs must be byte-packed to match CPER
* specification, since the tables are provided by the system BIOS
@@ -340,6 +360,40 @@ struct cper_ia_proc_ctx {
__u64 mm_reg_addr;
};
+/* ARM Processor Error Section */
+struct cper_sec_proc_arm {
+ __u32 validation_bits;
+ __u16 err_info_num; /* Number of Processor Error Info */
+ __u16 context_info_num; /* Number of Processor Context Info Records*/
+ __u32 section_length;
+ __u8 affinity_level;
+ __u8 reserved[3]; /* must be zero */
+ __u64 mpidr;
+ __u64 midr;
+ __u32 running_state; /* Bit 0 set - Processor running. PSCI = 0 */
+ __u32 psci_state;
Align comments vertically pls.
+};
+
+/* ARM Processor Error Information Structure */
+struct cper_arm_err_info {
+ __u8 version;
+ __u8 length;
+ __u16 validation_bits;
+ __u8 type;
+ __u16 multiple_error;
+ __u8 flags;
+ __u64 error_info;
+ __u64 virt_fault_addr;
+ __u64 physical_fault_addr;
+};
+
+/* ARM Processor Context Information Structure */
+struct cper_arm_ctx_info {
+ __u16 version;
+ __u16 type;
+ __u32 size;
+};
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
