Hi Ryder,
Looks good, but I have a few questions below.
On Sun, Apr 23, 2017 at 04:19:02PM +0800, Ryder Lee wrote:
> Add support for the Mediatek PCIe controller which can be found
> on MT7623A/N, MT2701 and MT8521p platforms.
>
> Signed-off-by: Ryder Lee <ryder....@mediatek.com>
> ---
> drivers/pci/host/Kconfig | 11 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-mediatek.c | 611
> +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 623 insertions(+)
> create mode 100644 drivers/pci/host/pcie-mediatek.c
>
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index f7c1d4d..cf13b5d 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -174,6 +174,17 @@ config PCIE_ROCKCHIP
> There is 1 internal PCIe port available to support GEN2 with
> 4 slots.
>
> +config PCIE_MEDIATEK
> + bool "Mediatek PCIe Controller for MT7623 SoCs families"
> + depends on (ARM && ARCH_MEDIATEK) || COMPILE_TEST
> + depends on OF
> + depends on PCI
> + select PCIEPORTBUS
> + help
> + Say Y here if you want to enable PCIe controller support on MT7623 A/N
> + series SoCs. There is a one root complex with 3 root ports available.
> + Each port supports Gen2 lane x1.
> +
> config VMD
> depends on PCI_MSI && X86_64 && SRCU
> tristate "Intel Volume Management Device Driver"
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 4d36866..265adff 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
> obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
> obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
> obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
> +obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
> obj-$(CONFIG_VMD) += vmd.o
>
> # The following drivers are for devices that use the generic ACPI
> diff --git a/drivers/pci/host/pcie-mediatek.c
> b/drivers/pci/host/pcie-mediatek.c
> new file mode 100644
> index 0000000..98e84d9
> --- /dev/null
> +++ b/drivers/pci/host/pcie-mediatek.c
> @@ -0,0 +1,611 @@
> +/*
> + * PCIe host controller driver for Mediatek MT7623 SoCs families
> + *
> + * Copyright (c) 2017 MediaTek Inc.
> + * Author: Ryder Lee <ryder....@mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/pci.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +
> +/* PCIe shared registers */
> +#define PCIE_SYS_CFG 0x00
> +#define PCIE_INT_ENABLE 0x0c
> +#define PCIE_CFG_ADDR 0x20
> +#define PCIE_CFG_DATA 0x24
> +
> +/* PCIe per port registers */
> +#define PCIE_BAR0_SETUP 0x10
> +#define PCIE_BAR1_SETUP 0x14
> +#define PCIE_BAR0_MEM_BASE 0x18
> +#define PCIE_CLASS 0x34
> +#define PCIE_LINK_STATUS 0x50
> +
> +#define PCIE_PORT_INT_EN(x) BIT(20 + (x))
> +#define PCIE_PORT_PERST(x) BIT(1 + (x))
> +#define PCIE_PORT_LINKUP BIT(0)
> +#define PCIE_BAR_MAP_MAX GENMASK(31, 16)
> +
> +#define PCIE_BAR_ENABLE BIT(0)
> +#define PCIE_REVISION_ID BIT(0)
> +#define PCIE_CLASS_CODE (0x60400 << 8)
> +#define PCIE_CONF_REG(regn) (((regn) & GENMASK(7, 2)) | \
> + ((((regn) >> 8) & GENMASK(3, 0)) << 24))
> +#define PCIE_CONF_FUN(fun) (((fun) << 8) & GENMASK(10, 8))
> +#define PCIE_CONF_DEV(dev) (((dev) << 11) & GENMASK(15, 11))
> +#define PCIE_CONF_BUS(bus) (((bus) << 16) & GENMASK(23, 16))
> +#define PCIE_CONF_ADDR(regn, fun, dev, bus) \
> + (PCIE_CONF_REG(regn) | PCIE_CONF_FUN(fun) | \
> + PCIE_CONF_DEV(dev) | PCIE_CONF_BUS(bus))
> +
> +/* Mediatek specific configuration registers */
> +#define PCIE_FTS_NUM 0x70c
> +#define PCIE_FTS_NUM_MASK GENMASK(15, 8)
> +#define PCIE_FTS_NUM_L0(x) ((x) & 0xff << 8)
> +
> +#define PCIE_FC_CREDIT 0x73c
> +#define PCIE_FC_CREDIT_MASK (GENMASK(31, 31) | GENMASK(28, 16))
> +#define PCIE_FC_CREDIT_VAL(x) ((x) << 16)
> +
> +/**
> + * struct mtk_pcie_port - PCIe port information
> + * @dev: pointer to root port device
> + * @base: IO mapped register base
> + * @list: port list
> + * @pcie: pointer to PCIe host info
> + * @reset: pointer to RC reset control
> + * @regs: port memory region
> + * @sys_ck: root port clock
> + * @phy: pointer to phy control block
> + * @irq: IRQ number
> + * @lane: lane count
> + * @index: port index
> + */
> +struct mtk_pcie_port {
> + struct device *dev;
> + void __iomem *base;
> + struct list_head list;
> + struct mtk_pcie *pcie;
> + struct reset_control *reset;
> + struct resource regs;
> + struct clk *sys_ck;
> + struct phy *phy;
> + int irq;
> + u32 lane;
> + u32 index;
> +};
> +
> +/**
> + * struct mtk_pcie - PCIe host information
> + * @dev: pointer to PCIe device
> + * @base: IO mapped register Base
> + * @free_ck: free-run reference clock
> + * @resources: bus resources
> + * @ports: pointer to PCIe port information
> + */
> +struct mtk_pcie {
> + struct device *dev;
> + void __iomem *base;
> + struct clk *free_ck;
> + struct list_head resources;
> + struct list_head ports;
> +};
> +
> +static inline bool mtk_pcie_link_is_up(struct mtk_pcie_port *port)
> +{
> + return !!(readl_relaxed(port->base + PCIE_LINK_STATUS) &
> + PCIE_PORT_LINKUP);
> +}
> +
> +static bool mtk_pcie_valid_device(struct mtk_pcie *pcie,
> + struct pci_bus *bus, int devfn)
> +{
> + struct mtk_pcie_port *port;
> + struct pci_dev *dev;
> + struct pci_bus *pbus;
> +
> + /* if there is no link, then there is no device */
> + list_for_each_entry(port, &pcie->ports, list) {
> + if (bus->number == 0 && port->index == PCI_SLOT(devfn) &&
> + mtk_pcie_link_is_up(port)) {
> + return true;
> + } else if (bus->number != 0) {
> + pbus = bus;
> + do {
> + dev = pbus->self;
> + if (port->index == PCI_SLOT(dev->devfn) &&
> + mtk_pcie_link_is_up(port)) {
> + return true;
> + }
> + pbus = dev->bus;
> + } while (dev->bus->number != 0);
> + }
> + }
> +
> + return false;
> +}
> +
> +static void mtk_pcie_port_free(struct mtk_pcie_port *port)
> +{
> + struct mtk_pcie *pcie = port->pcie;
> + struct device *dev = pcie->dev;
> +
> + devm_iounmap(dev, port->base);
> + devm_release_mem_region(dev, port->regs.start,
> + resource_size(&port->regs));
> + list_del(&port->list);
> + devm_kfree(dev, port);
> +}
> +
> +static int mtk_pcie_hw_rd_cfg(struct mtk_pcie *pcie, u32 bus, u32 devfn,
> + int where, int size, u32 *val)
> +{
> + writel(PCIE_CONF_ADDR(where, PCI_FUNC(devfn), PCI_SLOT(devfn), bus),
> + pcie->base + PCIE_CFG_ADDR);
> +
> + *val = 0;
> +
> + switch (size) {
> + case 1:
> + *val = readb(pcie->base + PCIE_CFG_DATA + (where & 3));
> + break;
> + case 2:
> + *val = readw(pcie->base + PCIE_CFG_DATA + (where & 2));
> + break;
> + case 4:
> + *val = readl(pcie->base + PCIE_CFG_DATA);
> + break;
> + }
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int mtk_pcie_hw_wr_cfg(struct mtk_pcie *pcie, u32 bus, u32 devfn,
> + int where, int size, u32 val)
> +
> +{
> + writel(PCIE_CONF_ADDR(where, PCI_FUNC(devfn), PCI_SLOT(devfn), bus),
> + pcie->base + PCIE_CFG_ADDR);
> +
> + switch (size) {
> + case 1:
> + writeb(val, pcie->base + PCIE_CFG_DATA + (where & 3));
> + break;
> + case 2:
> + writew(val, pcie->base + PCIE_CFG_DATA + (where & 2));
> + break;
> + case 4:
> + writel(val, pcie->base + PCIE_CFG_DATA);
> + break;
> + }
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int mtk_pcie_read_config(struct pci_bus *bus, u32 devfn,
> + int where, int size, u32 *val)
> +{
> + struct mtk_pcie *pcie = bus->sysdata;
> + u32 bn = bus->number;
> +
> + if (!mtk_pcie_valid_device(pcie, bus, devfn)) {
> + *val = 0xffffffff;
> + return PCIBIOS_DEVICE_NOT_FOUND;
> + }
I know there are some other drivers with the *_valid_device() pattern
in their config accessors, but I don't like it because it's racy.
It's possible for the link to be up for the test above, then go down
before the actual config access below.
Your hardware *should* do something sensible if we try to read config
space when the link is down, and ideally that would be enough that we
don't need this "valid_device()" check.
> + return mtk_pcie_hw_rd_cfg(pcie, bn, devfn, where, size, val);
> +}
> +
> +static int mtk_pcie_write_config(struct pci_bus *bus, u32 devfn,
> + int where, int size, u32 val)
> +{
> + struct mtk_pcie *pcie = bus->sysdata;
> + u32 bn = bus->number;
> +
> + if (!mtk_pcie_valid_device(pcie, bus, devfn))
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + return mtk_pcie_hw_wr_cfg(pcie, bn, devfn, where, size, val);
> +}
> +
> +static struct pci_ops mtk_pcie_ops = {
> + .read = mtk_pcie_read_config,
> + .write = mtk_pcie_write_config,
> +};
> +
> +static void mtk_pcie_configure_rc(struct mtk_pcie_port *port)
> +{
> + struct mtk_pcie *pcie = port->pcie;
> + u32 val;
> +
> + /* enable interrupt */
> + val = readl(pcie->base + PCIE_INT_ENABLE);
> + val |= PCIE_PORT_INT_EN(port->index);
> + writel(val, pcie->base + PCIE_INT_ENABLE);
> +
> + /* map to all DDR region. We need to set it before cfg operation. */
> + writel(PCIE_BAR_MAP_MAX | PCIE_BAR_ENABLE,
> + port->base + PCIE_BAR0_SETUP);
> +
> + /* configure class Code and revision ID */
> + writel(PCIE_CLASS_CODE | PCIE_REVISION_ID,
> + port->base + PCIE_CLASS);
> +
> + /* configure FC credit */
> + mtk_pcie_hw_rd_cfg(pcie, 0, (port->index << 3),
> + PCIE_FC_CREDIT, 4, &val);
> + val &= ~PCIE_FC_CREDIT_MASK;
> + val |= PCIE_FC_CREDIT_VAL(0x806c);
> + mtk_pcie_hw_wr_cfg(pcie, 0, (port->index << 3),
> + PCIE_FC_CREDIT, 4, val);
> +
> + /* configure RC FTS number to 250 when it leaves L0s */
> + mtk_pcie_hw_rd_cfg(pcie, 0, (port->index << 3),
> + PCIE_FTS_NUM, 4, &val);
> + val &= ~PCIE_FTS_NUM_MASK;
> + val |= PCIE_FTS_NUM_L0(0x50);
> + mtk_pcie_hw_wr_cfg(pcie, 0, (port->index << 3),
> + PCIE_FTS_NUM, 4, val);
> +}
> +
> +static void mtk_pcie_assert_ports(struct mtk_pcie_port *port)
> +{
> + struct mtk_pcie *pcie = port->pcie;
> + u32 val;
> +
> + /* assert port PERST_N */
> + val = readl(pcie->base + PCIE_SYS_CFG);
> + val |= PCIE_PORT_PERST(port->index);
> + writel(val, pcie->base + PCIE_SYS_CFG);
> +
> + /* de-assert port PERST_N */
> + val = readl(pcie->base + PCIE_SYS_CFG);
> + val &= ~PCIE_PORT_PERST(port->index);
> + writel(val, pcie->base + PCIE_SYS_CFG);
> +
> + /*
> + * at least 100ms delay because PCIe v2.0 need more time to
> + * train from Gen1 to Gen2
> + */
> + msleep(100);
> +}
> +
> +static int mtk_pcie_enable_ports(struct mtk_pcie *pcie)
> +{
> + struct device *dev = pcie->dev;
> + struct mtk_pcie_port *port, *tmp;
> + int err, linkup = 0;
> +
> + list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
> + err = clk_prepare_enable(port->sys_ck);
> + if (err) {
> + dev_err(dev, "failed to enable port%d clock\n",
> + port->index);
> + continue;
> + }
> +
> + /* assert RC */
> + reset_control_assert(port->reset);
> + /* de-assert RC */
> + reset_control_deassert(port->reset);
> +
> + /* power on PHY */
> + err = phy_power_on(port->phy);
> + if (err) {
> + dev_err(dev, "failed to power on port%d phy\n",
> + port->index);
> + goto err_phy_on;
> + }
> +
> + mtk_pcie_assert_ports(port);
> +
> + /* if link up, then setup root port configuration space */
> + if (mtk_pcie_link_is_up(port)) {
> + mtk_pcie_configure_rc(port);
> + linkup++;
> + continue;
> + }
> +
> + dev_info(dev, "Port%d link down\n", port->index);
> +
> + phy_power_off(port->phy);
> +err_phy_on:
> + clk_disable_unprepare(port->sys_ck);
> + mtk_pcie_port_free(port);
> + }
> +
> + return linkup;
> +}
> +
> +static int mtk_pcie_get_port_resource(struct mtk_pcie_port *port,
> + struct device_node *node)
> +{
> + struct device *dev = port->pcie->dev;
> + struct platform_device *pdev = to_platform_device(dev);
> + struct platform_device *plat_dev;
> + char name[10];
> + int err;
> +
> + err = of_address_to_resource(node, 0, &port->regs);
> + if (err) {
> + dev_err(dev, "failed to parse address: %d\n", err);
> + return err;
> + }
> +
> + port->base = devm_ioremap_resource(dev, &port->regs);
> + if (IS_ERR(port->base)) {
> + dev_err(dev, "failed to map port%d base\n", port->index);
> + return PTR_ERR(port->base);
> + }
> +
> + plat_dev = of_find_device_by_node(node);
> + if (!plat_dev) {
> + plat_dev = of_platform_device_create(
> + node, NULL,
> + platform_bus_type.dev_root);
> + if (!plat_dev)
> + return -EPROBE_DEFER;
> + }
> +
> + port->dev = &plat_dev->dev;
> +
> + port->irq = platform_get_irq(pdev, port->index);
> + if (!port->irq) {
> + dev_err(dev, "failed to get irq\n");
> + return -ENODEV;
> + }
> +
> + port->sys_ck = devm_clk_get(port->dev, "sys_ck");
> + if (IS_ERR(port->sys_ck)) {
> + dev_err(port->dev, "failed to get port%d clock\n", port->index);
> + return PTR_ERR(port->sys_ck);
> + }
> +
> + port->reset = devm_reset_control_get(port->dev, "pcie-reset");
> + if (IS_ERR(port->reset)) {
> + dev_err(port->dev, "failed to get port%d reset control\n",
> + port->index);
> + return PTR_ERR(port->reset);
> + }
> +
> + snprintf(name, sizeof(name), "pcie-phy%d", port->index);
> + port->phy = devm_of_phy_get(port->dev, node, name);
> + if (IS_ERR(port->phy)) {
> + dev_err(port->dev, "failed to get port%d phy\n", port->index);
> + return PTR_ERR(port->phy);
> + }
> +
> + return 0;
> +}
> +
> +static int mtk_pcie_parse_and_add_res(struct mtk_pcie *pcie)
> +{
> + struct device *dev = pcie->dev;
> + struct platform_device *pdev = to_platform_device(dev);
> + struct device_node *node = dev->of_node, *child;
> + struct resource_entry *win, *tmp;
> + struct resource *regs;
> + resource_size_t iobase;
> + int err;
> +
> + /* parse shared resources */
> + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + pcie->base = devm_ioremap_resource(dev, regs);
> + if (IS_ERR(pcie->base)) {
> + dev_err(dev, "failed to get PCIe base\n");
> + return PTR_ERR(pcie->base);
> + }
> +
> + pcie->free_ck = devm_clk_get(dev, "free_ck");
> + if (IS_ERR(pcie->free_ck)) {
> + dev_err(dev, "failed to get free_ck\n");
> + return PTR_ERR(pcie->free_ck);
> + }
> +
> + err = of_pci_get_host_bridge_resources(node, 0, 0xff, &pcie->resources,
> + &iobase);
> + if (err)
> + return err;
> +
> + err = devm_request_pci_bus_resources(dev, &pcie->resources);
> + if (err)
> + return err;
> +
> + resource_list_for_each_entry_safe(win, tmp, &pcie->resources) {
> + struct resource *res = win->res;
> +
> + switch (resource_type(res)) {
> + case IORESOURCE_IO:
> + err = pci_remap_iospace(res, iobase);
> + if (err) {
> + dev_warn(dev, "failed to map resource %pR\n",
> + res);
> + resource_list_destroy_entry(win);
> + }
> + break;
> + }
> + }
> +
> + /* parse port resources */
> + for_each_child_of_node(node, child) {
> + struct mtk_pcie_port *port;
> + int index;
> +
> + err = of_pci_get_devfn(child);
> + if (err < 0) {
> + dev_err(pcie->dev, "failed to parse devfn: %d\n", err);
dev_err(dev, ...)
> + return err;
> + }
> +
> + index = PCI_SLOT(err);
> + if (index < 1) {
> + dev_err(dev, "invalid port number: %d\n", index);
> + return -EINVAL;
> + }
> +
> + index--;
> +
> + if (!of_device_is_available(child))
> + continue;
> +
> + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> + if (!port)
> + return -ENOMEM;
> +
> + err = of_property_read_u32(child, "num-lanes", &port->lane);
> + if (err) {
> + dev_err(dev, "missing num-lanes property\n");
> + return err;
> + }
> +
> + port->index = index;
> + port->pcie = pcie;
> +
> + err = mtk_pcie_get_port_resource(port, child);
> + if (err)
> + return err;
> +
> + INIT_LIST_HEAD(&port->list);
> + list_add_tail(&port->list, &pcie->ports);
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * This IP lacks interrupt status register to check or map INTx from
> + * different devices at the same time.
> + */
> +static int __init mtk_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8
> pin)
> +{
> + struct mtk_pcie *pcie = dev->bus->sysdata;
> + struct mtk_pcie_port *port;
> +
> + list_for_each_entry(port, &pcie->ports, list)
> + if (port->index == slot)
> + return port->irq;
> +
> + return -1;
> +}
> +
> +static int mtk_pcie_register_ports(struct mtk_pcie *pcie)
> +{
> + struct pci_bus *bus, *child;
> +
> + bus = pci_scan_root_bus(pcie->dev, 0, &mtk_pcie_ops, pcie,
> + &pcie->resources);
> + if (!bus) {
> + dev_err(pcie->dev, "failed to create root bus\n");
> + return -ENOMEM;
> + }
> +
> + if (!pci_has_flag(PCI_PROBE_ONLY)) {
> + pci_fixup_irqs(pci_common_swizzle, mtk_pcie_map_irq);
> + pci_bus_size_bridges(bus);
> + pci_bus_assign_resources(bus);
> +
> + list_for_each_entry(child, &bus->children, node)
> + pcie_bus_configure_settings(child);
Do you actually need the functionality of PCI_PROBE_ONLY? We're
trying to get rid of this, so if you don't need it, please omit it.
If you *do* need it, can you include a note about why?
If you do need it, I don't think PCI_PROBE_ONLY should control
pci_fixup_irqs() or pcie_bus_configure_settings(). I know there is
some other similar code that does this, but I think PCI_PROBE_ONLY
should only influence resource assignment, i.e., BARs and bridge
windows. I don't want it to influence IRQs or the MPS/MRRS settings
done by pcie_bus_configure_settings() if we can avoid it.
> + }
> +
> + pci_bus_add_devices(bus);
> +
> + return 0;
> +}
> +
> +static int mtk_pcie_probe(struct platform_device *pdev)
> +{
> + struct mtk_pcie *pcie;
> + int err;
> +
> + pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
> + if (!pcie)
> + return -ENOMEM;
> +
> + pcie->dev = &pdev->dev;
> + platform_set_drvdata(pdev, pcie);
> +
> + /*
> + * parse PCI ranges, configuration bus range and
> + * request their resources
> + */
> + INIT_LIST_HEAD(&pcie->ports);
> + INIT_LIST_HEAD(&pcie->resources);
> +
> + err = mtk_pcie_parse_and_add_res(pcie);
> + if (err)
> + goto err_parse;
> +
> + pm_runtime_enable(pcie->dev);
> + err = pm_runtime_get_sync(pcie->dev);
> + if (err)
> + goto err_pm;
> +
> + err = clk_prepare_enable(pcie->free_ck);
> + if (err) {
> + dev_err(pcie->dev, "failed to enable free_ck\n");
> + goto err_free_ck;
> + }
> +
> + /* power on PCIe ports */
> + err = mtk_pcie_enable_ports(pcie);
> + if (!err)
> + goto err_enable;
> +
> + /* register PCIe ports */
> + err = mtk_pcie_register_ports(pcie);
> + if (err)
> + goto err_enable;
> +
> + return 0;
> +
> +err_enable:
> + clk_disable_unprepare(pcie->free_ck);
> +err_free_ck:
> + pm_runtime_put_sync(pcie->dev);
> +err_pm:
> + pm_runtime_disable(pcie->dev);
> +err_parse:
> + pci_free_resource_list(&pcie->resources);
> +
> + return err;
> +}
> +
> +static const struct of_device_id mtk_pcie_ids[] = {
> + { .compatible = "mediatek,mt7623-pcie"},
> + { .compatible = "mediatek,mt2701-pcie"},
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mtk_pcie_ids);
> +
> +static struct platform_driver mtk_pcie_driver = {
> + .probe = mtk_pcie_probe,
> + .driver = {
> + .name = "mtk-pcie",
> + .of_match_table = mtk_pcie_ids,
Per [1], I think you should have ".suppress_bind_attrs = true," here.
Without it, apparently you can easily crash the system by unbinding
the driver, as in [2].
[1]
https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/commit/?id=65e0527b933a
[2]
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/?id=073d3dbe9a7c
> + },
> +};
> +
> +builtin_platform_driver(mtk_pcie_driver);
> +
> +MODULE_DESCRIPTION("Mediatek PCIe host driver for MT7623 SoCs families");
> +MODULE_LICENSE("GPL v2");
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
