On Thu, May 04, 2017 at 01:05:38PM -0700, Bjorn Andersson wrote:
> Add device tree binding documentation for the Qualcomm GLINK RPM, used
> for communication with the Resource Power Management subsystem in
> various Qualcomm SoCs.
>
> Signed-off-by: Bjorn Andersson <bjorn.anders...@linaro.org>
> ---
>
> Changes since v3:
> - Transition doorbell to mailbox framework
>
> Changes since v2:
> - Replace qcom,ipc syscon with a "doorbell"
>
> Changes since v1:
> - None
>
> .../devicetree/bindings/soc/qcom/qcom,glink.txt | 73
> ++++++++++++++++++++++
> 1 file changed, 73 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
> b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
> new file mode 100644
> index 000000000000..e32198df0e9c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
> @@ -0,0 +1,73 @@
> +Qualcomm RPM GLINK binding
> +
> +This binding describes the Qualcomm RPM GLINK, a fifo based mechanism for
> +communication with the Resource Power Management system on various Qualcomm
> +platforms.
> +
> +- compatible:
> + Usage: required
> + Value type: <stringlist>
> + Definition: must be "qcom,glink-rpm"
> +
> +- interrupts:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: should specify the IRQ used by the remote processor to
> + signal this processor about communication related events
> +
> +- qcom,rpm-msg-ram:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: handle to RPM message memory resource
> +
> +- mboxes:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: reference to the "rpm_hlos" mailbox in APCS, as described
> + in mailbox/mailbox.txt
> +
> += GLINK DEVICES
> +Each subnode of the GLINK node represent function tied to a virtual
> +communication channel. The name of the nodes are not important. The
> properties
> +of these nodes are defined by the individual bindings for the specific
> function
> +- but must contain the following property:
> +
> +- qcom,glink-channels:
> + Usage: required
> + Value type: <stringlist>
> + Definition: a list of channels tied to this function, used for matching
> + the function to a set of virtual channels
> +
> += EXAMPLE
> +The following example represents the GLINK RPM node on a MSM8996 device, with
> +the function for the "rpm_request" channel defined, which is used for
> +regualtors and root clocks.
> +
> + apcs_glb: apcs-glb@9820000 {
mailbox@... Or does this block do other things?
Otherwise,
Acked-by: Rob Herring <r...@kernel.org>
> + compatible = "qcom,msm8996-apcs-hmss-global";
> + reg = <0x9820000 0x1000>;
> +
> + #mbox-cells = <1>;
> + };
> +
> + rpm_msg_ram: memory@68000 {
> + compatible = "qcom,rpm-msg-ram";
> + reg = <0x68000 0x6000>;
> + };
> +
> + rpm-glink {
> + compatible = "qcom,glink-rpm";
> +
> + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> +
> + qcom,rpm-msg-ram = <&rpm_msg_ram>;
> +
> + mboxes = <&apcs_glb 0>;
> +
> + rpm-requests {
> + compatible = "qcom,rpm-msm8996";
> + qcom,glink-channels = "rpm_requests";
> +
> + ...
> + };
> + };
> --
> 2.12.0
>
