Add PCIe node for hi3660, and add binding documentation.
Cc: Guodong Xu <guodong...@linaro.org>
Signed-off-by: Song Xiaowei <songxiao...@hisilicon.com>
---
.../devicetree/bindings/pci/hisilicon-pcie.txt | 52 ++++++++++++++++++++++
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 31 +++++++++++++
2 files changed, 83 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index a339dbb15493..71491178c86c 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -85,3 +85,55 @@ Example:
0x0 0 0 4 &mbigen_pcie0 650 4>;
status = "ok";
};
+
+
+
+HiSilicon Kirin SoC PCIe host DT description
+
+Kirin PCIe host controller is also based on Designware PCI core.
+It shares common functions with PCIe Designware core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:
+
+Required properties
+- compatible: Should contain "hisilicon,kirin-pcie".
+- reg: Should contain rc_dbi, apb, phy, config registers location and length.
+- reg-names: Must include the following entries:
+ "dbi": controller configuration registers;
+ "apb": apb Ctrl register;
+ "phy": apb PHY register;
+ "config": PCIe configuration space registers.
+- reset-gpio: perst assert/deassert gpio
+
+Optional properties:
+- status: Either "ok" or "disabled".
+
+Kirin960 Example:
+ kirin_pcie@f4000000 {
+ compatible = "hisilicon,kirin-pcie";
+ reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000
0x0 0x1000>,
+ <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF5000000
0 0x2000>;
+ reg-names = "dbi","apb","phy", "config";
+ bus-range = <0x0 0x1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x00000000 0x0 0xf6000000 0x0
0x2000000>;
+ num-lanes = <1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0 0 0 2 &gic 0 0 0 283 4>,
+ <0x0 0 0 3 &gic 0 0 0 284 4>,
+ <0x0 0 0 4 &gic 0 0 0 285 4>;
+ clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux",
+ "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
+ reset-gpio = <&gpio11 1 0 >;
+ status = "ok";
+ };
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 3983086bd67b..2406a54947df 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -156,5 +156,36 @@
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
+
+ kirin_pcie@f4000000 {
+ compatible = "hisilicon,kirin-pcie";
+ reg = <0x0 0xf4000000 0x0 0x1000>,
+ <0x0 0xff3fe000 0x0 0x1000>,
+ <0x0 0xf3f20000 0x0 0x40000>,
+ <0x0 0xF5000000 0x0 0x2000>;
+ reg-names = "dbi", "apb", "phy", "config";
+ bus-range = <0x0 0x1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x00000000 0x0
+ 0xf6000000 0x0 0x2000000>;
+ num-lanes = <1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>,
+ <0x0 0 0 2 &gic 0 0 0 283 4>,
+ <0x0 0 0 3 &gic 0 0 0 284 4>,
+ <0x0 0 0 4 &gic 0 0 0 285 4>;
+ clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux",
+ "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
+ reset-gpio = <&gpio11 1 0 >;
+ status = "ok";
+ };
};
};
--
2.11.GIT
