From: David Brownell <[EMAIL PROTECTED]>
Mistral-specific:
- Add PWL-driven LCD backlight device
- Apply power to the board even when the LCD isn't configured; things
like EEPROM, temperature sensor, and wakeup switch depend on it.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Tony Lindgren <[EMAIL PROTECTED]>
---
arch/arm/mach-omap1/board-osk.c | 22 ++++++++++++++++++++++
1 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 253c539..df9681d 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -293,6 +293,18 @@ static struct platform_device osk5912_kp_device = {
.resource = osk5912_kp_resources,
};
+static struct omap_backlight_config mistral_bl_data = {
+ .default_intensity = 0xa0,
+};
+
+static struct platform_device mistral_bl_device = {
+ .name = "omap-bl",
+ .id = -1,
+ .dev = {
+ .platform_data = &mistral_bl_data,
+ },
+};
+
static struct platform_device osk5912_lcd_device = {
.name = "lcd_osk",
.id = -1,
@@ -300,6 +312,7 @@ static struct platform_device osk5912_lcd_device = {
static struct platform_device *mistral_devices[] __initdata = {
&osk5912_kp_device,
+ &mistral_bl_device,
&osk5912_lcd_device,
};
@@ -373,6 +386,15 @@ static void __init osk_mistral_init(void)
} else
printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
+ /* LCD: backlight, and power; power controls other devices on the
+ * board, like the touchscreen, EEPROM, and wakeup (!) switch.
+ */
+ omap_cfg_reg(PWL);
+ if (omap_request_gpio(2) == 0) {
+ omap_set_gpio_direction(2, 0 /* out */);
+ omap_set_gpio_dataout(2, 1 /* on */);
+ }
+
platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
}
#else
--
1.4.4.2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
