On Sat, May 20, 2017 at 08:59:54PM +0300, Rakesh Pandit wrote:
> While doing IO if I reset NVMe SSD (model :Samsung MZVPV512HDGL-00000)
> it doesn't work as expected also results in NULL point dereference and
> system becomes unstable.
>
> Device's access is successfully disabled and reset attempt does
> successfully complete but restore isn't able to restore NVMe device
> properly. This patch at least makes the system stable.
Adding linux-pci to the Cc list. NVMe only clears the driver data
in the ->remove callback, so the trace below looks very odd. That
being said the issue of PCIe error handling synchronization came
up before and I think we really need to figure out a way to synchronize
the error methods with ->probe / ->remove. In this case it might have
been the call to device_release_driver from nvme_remove_dead_ctrl_work,
but either way we need something that properly synchronized the
PCIe calls.
Pandit: can you throw a printk into nvme_remove_dead_ctrl_work and
see if it gets called just before you see the NULL pointer dereference?
> [ 1619.130015] BUG: unable to handle kernel NULL pointer dereference at
> 00000000000001f8
> [ 1619.130059] IP: nvme_reset+0x5/0x60
> [ 1619.130075] PGD 0
> [ 1619.130076] P4D 0
>
> [ 1619.130103] Oops: 0000 [#1] SMP
> [ 1619.130117] Modules linked in: rfcomm(E) fuse(E)
> nf_conntrack_netbios_ns(E)......
> [ 1619.130403] btrtl(E) ath(E) ......
> [ 1619.130701] usb_storage i2c_hid
> [ 1619.130720] CPU: 0 PID: 31625 Comm: bash Tainted: G W E 4.11.0+
> #3
> [ 1619.130749] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10
> 03/03/2016
> [ 1619.130780] task: ffff880163e48000 task.stack: ffffc900085c4000
> [ 1619.130807] RIP: 0010:nvme_reset+0x5/0x60
> [ 1619.130825] RSP: 0000:ffffc900085c7d68 EFLAGS: 00010246
> [ 1619.130848] RAX: ffffffff815cc190 RBX: ffff8804aeaa1000 RCX:
> 0000000000000000
> [ 1619.130877] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
> 0000000000000000
> [ 1619.130904] RBP: ffffc900085c7d70 R08: 0000000000000002 R09:
> ffffc900085c7ca4
> [ 1619.130934] R10: 0000000000000000 R11: 000000000000029e R12:
> ffff8804aeaa1100
> [ 1619.130962] R13: 0000000000000002 R14: ffffc900085c7f18 R15:
> fffffffffffffff2
> [ 1619.130994] FS: 00007f692d7cb700(0000) GS:ffff8804c1c00000(0000)
> knlGS:0000000000000000
> [ 1619.131027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 1619.131052] CR2: 00000000000001f8 CR3: 0000000164483000 CR4:
> 00000000003406f0
> [ 1619.131083] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> 0000000000000000
> [ 1619.131113] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
> 0000000000000400
> [ 1619.131144] Call Trace:
> [ 1619.131159] ? nvme_reset_notify+0x1a/0x30
> [ 1619.131181] pci_dev_restore+0x38/0x50
> [ 1619.131199] pci_reset_function+0x65/0x80
> [ 1619.131218] reset_store+0x54/0x80
> [ 1619.131235] dev_attr_store+0x18/0x30
> [ 1619.131253] sysfs_kf_write+0x37/0x40
> [ 1619.131269] kernfs_fop_write+0x110/0x1a0
> [ 1619.131288] __vfs_write+0x37/0x140
> [ 1619.131306] ? selinux_file_permission+0xd7/0x110
> [ 1619.131328] ? security_file_permission+0x3b/0xc0
> [ 1619.131349] vfs_write+0xb5/0x1a0
> [ 1619.131366] SyS_write+0x55/0xc0
> [ 1619.131383] entry_SYSCALL_64_fastpath+0x1a/0xa5
> [ 1619.131405] RIP: 0033:0x7f692cec1c20
> [ 1619.131421] RSP: 002b:00007ffeea27b938 EFLAGS: 00000246 ORIG_RAX:
> 0000000000000001
> [ 1619.131452] RAX: ffffffffffffffda RBX: 00007f692d18b5e0 RCX:
> 00007f692cec1c20
> [ 1619.131481] RDX: 0000000000000002 RSI: 000055dcd896ccf0 RDI:
> 0000000000000001
> [ 1619.131510] RBP: 0000000000000001 R08: 00007f692d18c740 R09:
> 00007f692d7cb700
> [ 1619.131541] R10: 0000000000000073 R11: 0000000000000246 R12:
> 000055dcd89a3930
> [ 1619.131571] R13: 0000000000000001 R14: 0000000000000000 R15:
> 0000000000000001
> [ 1619.131601] Code: 84 00 00 00 00 00 0f 1f 44 00 00 55 89 f6 48 03
> b7 40 ff ff ff 48 89 e5 48 8b 06 48 89 02 31 c0 5d c3 0f 1f 40 00 0f
> 1f 44 00 00 <48> 8b 87 f8 01 00 00 48 85 c0 74 49 48 8b 80 a0 01 00 00
> a8 20
> [ 1619.131708] RIP: nvme_reset+0x5/0x60 RSP: ffffc900085c7d68
> [ 1619.131732] CR2: 00000000000001f8
>
> Signed-off-by: Rakesh Pandit <rak...@tuxera.com>
> ---
>
> This is produce independent of separate issue under discussion
> regarding resetting the device (system hang) and works well with or
> without patch set "nvme: fix hang in path of removing disk".
>
> drivers/nvme/host/pci.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
> index 0866f64..fce61eb 100644
> --- a/drivers/nvme/host/pci.c
> +++ b/drivers/nvme/host/pci.c
> @@ -2159,6 +2159,11 @@ static void nvme_reset_notify(struct pci_dev *pdev,
> bool prepare)
> {
> struct nvme_dev *dev = pci_get_drvdata(pdev);
>
> + if (!dev) {
> + pr_err("reset%s notification to nvme failed",
> + prepare ? " preparation" : "");
> + return;
> + }
> if (prepare)
> nvme_dev_disable(dev, false);
> else
> --
> 2.5.5
---end quoted text---
