From: Xiang Chen <[email protected]> Add code to fill the interface of phy_hard_reset, phy_get_max_linkrate, and phy enable/disable.
Signed-off-by: John Garry <[email protected]> Signed-off-by: Xiang Chen <[email protected]> --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 39 ++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 9add347..4a6f5c7 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -195,6 +195,8 @@ #define TXID_AUTO (PORT_BASE + 0xb8) #define CT3_OFF 1 #define CT3_MSK (0x1 << CT3_OFF) +#define TX_HARDRST_OFF 2 +#define TX_HARDRST_MSK (0x1 << TX_HARDRST_OFF) #define RX_IDAF_DWORD0 (PORT_BASE + 0xc4) #define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc) #define SAS_SSP_CON_TIMER_CFG (PORT_BASE + 0x134) @@ -650,6 +652,14 @@ static void enable_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no) hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg); } +static void disable_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG); + + cfg &= ~PHY_CFG_ENA_MSK; + hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg); +} + static void start_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no) { config_id_frame_v3_hw(hisi_hba, phy_no); @@ -657,6 +667,11 @@ static void start_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no) enable_phy_v3_hw(hisi_hba, phy_no); } +static void stop_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + disable_phy_v3_hw(hisi_hba, phy_no); +} + static void start_phys_v3_hw(struct hisi_hba *hisi_hba) { int i; @@ -665,6 +680,26 @@ static void start_phys_v3_hw(struct hisi_hba *hisi_hba) start_phy_v3_hw(hisi_hba, i); } +static void phy_hard_reset_v3_hw(struct hisi_hba *hisi_hba, int phy_no) +{ + struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no]; + u32 txid_auto; + + stop_phy_v3_hw(hisi_hba, phy_no); + if (phy->identify.device_type == SAS_END_DEVICE) { + txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO); + hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO, + txid_auto | TX_HARDRST_MSK); + } + msleep(100); + start_phy_v3_hw(hisi_hba, phy_no); +} + +enum sas_linkrate phy_get_max_linkrate_v3_hw(void) +{ + return SAS_LINK_RATE_12_0_GBPS; +} + static void phys_init_v3_hw(struct hisi_hba *hisi_hba) { start_phys_v3_hw(hisi_hba); @@ -2141,6 +2176,10 @@ static void hisi_sas_v3_remove(struct pci_dev *pdev) .start_delivery = start_delivery_v3_hw, .slot_complete = slot_complete_v3_hw, .phys_init = phys_init_v3_hw, + .phy_enable = enable_phy_v3_hw, + .phy_disable = disable_phy_v3_hw, + .phy_hard_reset = phy_hard_reset_v3_hw, + .phy_get_max_linkrate = phy_get_max_linkrate_v3_hw, }; enum { -- 1.9.1
