On 31.05.2017 11:50, Alexandre Belloni wrote:
> Hi,
>
> On 23/02/2017 at 10:49:17 +0200, Claudiu Beznea wrote:
>> Add pwm controller bindings for sam5d2_xplained
>> and enable it.
>>
>> Changes since v1:
>> - Correct the typo in patch subject.
>>
>> Signed-off-by: Claudiu Beznea <[email protected]>
>> ---
>> arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi | 4 ++++
>> arch/arm/boot/dts/sama5d2.dtsi | 8 ++++++++
>> 2 files changed, 12 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
>> b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
>> index 9fc270f..493ea29 100644
>> --- a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
>> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
>> @@ -318,6 +318,10 @@
>> };
>> };
>>
>> + pwm0: pwm@f802c000 {
>> + status = "okay";
>> + };
>> +
>> flx0: flexcom@f8034000 {
>> atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
>> status = "disabled"; /* conflict with ISC_D2 &
>> ISC_D3 data pins */
>
>
> This doesn't apply on v4.12-rc1, this file doesn't exist.
Sorry, I will resend it.
>
>> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
>> index cd459e8..e88785e 100644
>> --- a/arch/arm/boot/dts/sama5d2.dtsi
>> +++ b/arch/arm/boot/dts/sama5d2.dtsi
>> @@ -1098,6 +1098,14 @@
>> status = "disabled";
>> };
>>
>> + pwm0: pwm@f802c000 {
>> + compatible = "atmel,sama5d2-pwm";
>> + reg = <0xf802c000 0x4000>;
>> + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
>> + #pwm-cells = <3>;
>> + clocks = <&pwm_clk>;
>> + };
>> +
>> sfr: sfr@f8030000 {
>> compatible = "atmel,sama5d2-sfr", "syscon";
>> reg = <0xf8030000 0x98>;
>> --
>> 2.7.4
>>
>
