From: Syed Mohammed Khasim <[EMAIL PROTECTED]>
This patch adds minimal OMAP2430 support to plat-omap files to
get the kernel booting on 2430SDP.
Signed-off-by: Syed Mohammed Khasim <[EMAIL PROTECTED]>
Signed-off-by: Tony Lindgren <[EMAIL PROTECTED]>
---
arch/arm/plat-omap/devices.c | 6 +++-
arch/arm/plat-omap/dmtimer.c | 2 +
arch/arm/plat-omap/gpio.c | 76 ++++++++++++++++++++++++++++++++++-------
arch/arm/plat-omap/mcbsp.c | 15 +++++---
4 files changed, 80 insertions(+), 19 deletions(-)
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -429,6 +429,10 @@ static inline void omap_init_rng(void) {}
*/
static int __init omap_init_devices(void)
{
+/*
+ * Need to enable relevant once for 2430 SDP
+ */
+#ifndef CONFIG_MACH_OMAP_2430SDP
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
@@ -438,7 +442,7 @@ static int __init omap_init_devices(void)
omap_init_uwire();
omap_init_wdt();
omap_init_rng();
-
+#endif
return 0;
}
arch_initcall(omap_init_devices);
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -506,6 +506,8 @@ int omap_dm_timer_init(void)
BUG_ON(dm_source_clocks[i] == NULL);
}
#endif
+ if (cpu_is_omap243x())
+ dm_timers[0].phys_base = 0x49018000;
for (i = 0; i < dm_timer_count; i++) {
#ifdef CONFIG_ARCH_OMAP2
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -85,10 +85,17 @@
/*
* omap24xx specific GPIO registers
*/
-#define OMAP24XX_GPIO1_BASE (void __iomem *)0x48018000
-#define OMAP24XX_GPIO2_BASE (void __iomem *)0x4801a000
-#define OMAP24XX_GPIO3_BASE (void __iomem *)0x4801c000
-#define OMAP24XX_GPIO4_BASE (void __iomem *)0x4801e000
+#define OMAP242X_GPIO1_BASE (void __iomem *)0x48018000
+#define OMAP242X_GPIO2_BASE (void __iomem *)0x4801a000
+#define OMAP242X_GPIO3_BASE (void __iomem *)0x4801c000
+#define OMAP242X_GPIO4_BASE (void __iomem *)0x4801e000
+
+#define OMAP243X_GPIO1_BASE (void __iomem *)0x4900C000
+#define OMAP243X_GPIO2_BASE (void __iomem *)0x4900E000
+#define OMAP243X_GPIO3_BASE (void __iomem *)0x49010000
+#define OMAP243X_GPIO4_BASE (void __iomem *)0x49012000
+#define OMAP243X_GPIO5_BASE (void __iomem *)0x480B6000
+
#define OMAP24XX_GPIO_REVISION 0x0000
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
#define OMAP24XX_GPIO_SYSSTATUS 0x0014
@@ -168,12 +175,22 @@ static struct gpio_bank gpio_bank_730[7] = {
#endif
#ifdef CONFIG_ARCH_OMAP24XX
-static struct gpio_bank gpio_bank_24xx[4] = {
- { OMAP24XX_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
METHOD_GPIO_24XX },
- { OMAP24XX_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
METHOD_GPIO_24XX },
- { OMAP24XX_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
METHOD_GPIO_24XX },
- { OMAP24XX_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
METHOD_GPIO_24XX },
+
+static struct gpio_bank gpio_bank_242x[4] = {
+ { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
METHOD_GPIO_24XX },
+ { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
METHOD_GPIO_24XX },
+ { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
METHOD_GPIO_24XX },
+ { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
METHOD_GPIO_24XX },
};
+
+static struct gpio_bank gpio_bank_243x[5] = {
+ { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
METHOD_GPIO_24XX },
+ { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
METHOD_GPIO_24XX },
+ { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
METHOD_GPIO_24XX },
+ { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
METHOD_GPIO_24XX },
+ { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128,
METHOD_GPIO_24XX },
+};
+
#endif
static struct gpio_bank *gpio_bank;
@@ -1113,6 +1130,11 @@ static int initialized;
static struct clk * gpio_ick;
static struct clk * gpio_fck;
+#ifdef CONFIG_ARCH_OMAP2430
+static struct clk * gpio5_ick;
+static struct clk * gpio5_fck;
+#endif
+
static int __init _omap_gpio_init(void)
{
int i;
@@ -1138,7 +1160,25 @@ static int __init _omap_gpio_init(void)
printk("Could not get gpios_fck\n");
else
clk_enable(gpio_fck);
- }
+
+ /*
+ * On 2430 GPIO 5 uses CORE L4 ICLK
+ */
+#ifdef CONFIG_ARCH_OMAP2430
+ if (cpu_is_omap2430()) {
+ gpio5_ick = clk_get(NULL, "gpio5_ick");
+ if (IS_ERR(gpio5_ick))
+ printk("Could not get gpio5_ick\n");
+ else
+ clk_enable(gpio5_ick);
+ gpio5_fck = clk_get(NULL, "gpio5_fck");
+ if (IS_ERR(gpio5_fck))
+ printk("Could not get gpio5_fck\n");
+ else
+ clk_enable(gpio5_fck);
+ }
+#endif
+}
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
@@ -1165,14 +1205,24 @@ static int __init _omap_gpio_init(void)
gpio_bank = gpio_bank_730;
}
#endif
+
#ifdef CONFIG_ARCH_OMAP24XX
- if (cpu_is_omap24xx()) {
+ if (cpu_is_omap242x()) {
int rev;
gpio_bank_count = 4;
- gpio_bank = gpio_bank_24xx;
+ gpio_bank = gpio_bank_242x;
+ rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
+ (rev >> 4) & 0x0f, rev & 0x0f);
+ }
+ if (cpu_is_omap243x()) {
+ int rev;
+
+ gpio_bank_count = 5;
+ gpio_bank = gpio_bank_243x;
rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
- printk(KERN_INFO "OMAP24xx GPIO hardware version %d.%d\n",
+ printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
(rev >> 4) & 0x0f, rev & 0x0f);
}
#endif
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -225,11 +225,16 @@ static void omap_mcbsp_dsp_free(void)
#ifdef CONFIG_ARCH_OMAP2
static void omap2_mcbsp2_mux_setup(void)
{
- omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
- omap_cfg_reg(R14_24XX_MCBSP2_FSX);
- omap_cfg_reg(W15_24XX_MCBSP2_DR);
- omap_cfg_reg(V15_24XX_MCBSP2_DX);
- omap_cfg_reg(V14_24XX_GPIO117);
+ if (cpu_is_omap2420()) {
+ omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
+ omap_cfg_reg(R14_24XX_MCBSP2_FSX);
+ omap_cfg_reg(W15_24XX_MCBSP2_DR);
+ omap_cfg_reg(V15_24XX_MCBSP2_DX);
+ omap_cfg_reg(V14_24XX_GPIO117);
+ }
+ /*
+ * Need to add MUX settings for OMAP 2430 SDP
+ */
}
#endif
--
1.4.4.2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
