[PATCH 4/4] ARM64: dts: meson-gxl-s905x-p212: Add HDMI and CVBS nodes

[Neil Armstrong]

Add HDMI and CVBS nodes for the Amlogic P212 reference board.

Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxl-s905x-p212.dts      | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts 
b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
index db31e09..6ab17c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -58,6 +58,17 @@
                        };
                };
        };
+
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_connector_in: endpoint {
+                               remote-endpoint = <&hdmi_tx_tmds_out>;
+                       };
+               };
+       };
 };
 
 &cvbs_vdac_port {
@@ -66,6 +77,18 @@
        };
 };
 
+&hdmi_tx {
+       status = "okay";
+       pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+       pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+       hdmi_tx_tmds_out: endpoint {
+               remote-endpoint = <&hdmi_connector_in>;
+       };
+};
+
 /* This UART is brought out to the DB9 connector */
 &uart_AO {
        status = "okay";
-- 
1.9.1