Hi Enric,

On Fri, May 26, 2017 at 01:04:13PM +0200, Enric Balletbo i Serra wrote:
> Allow the possibility to configure the charge and the current voltage of
> the charger and also the NTC type for battery temperature measurement.
> 
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
> ---
> Changes since v2:
>  - Requested by Sebastian Reichel
>    - Use the simple-battery framework
>    - Use device_property_read_u32 instead of of_property_read_u32
> Changes since v1:
>  - None
> 
>  drivers/power/supply/tps65217_charger.c | 194 
> ++++++++++++++++++++++++++++++--
>  include/linux/mfd/tps65217.h            |   2 +
>  2 files changed, 188 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/power/supply/tps65217_charger.c 
> b/drivers/power/supply/tps65217_charger.c
> index 1f52340..5939e77 100644
> --- a/drivers/power/supply/tps65217_charger.c
> +++ b/drivers/power/supply/tps65217_charger.c
>
> [...]
>
> +#ifdef CONFIG_OF

You can drop the #ifdef CONFIG_OF. device_properties can also be
added via ACPI or boardcode and power_supply_get_battery_info is
always available (but will return -EINVAL values for !OF at the
moment).

> +static struct tps65217_charger_platform_data *tps65217_charger_pdata_init(
> +             struct tps65217_charger *charger)
> +{
> +     struct tps65217_charger_platform_data *pdata;
> +     struct power_supply_battery_info info = {};
> +     int ret;
> +
> +     pdata = devm_kzalloc(charger->dev, sizeof(*pdata), GFP_KERNEL);
> +     if (!pdata)
> +             return ERR_PTR(-ENOMEM);
> +
> +     /*
> +      * If battery info is not supplied just ignore and program default
> +      * values.
> +      */
> +     power_supply_get_battery_info(charger->psy, &info);
> +
> +     if (info.charge_voltage_uv > 0)
> +             pdata->charge_voltage_uv = info.charge_voltage_uv;
> +     else
> +             pdata->charge_voltage_uv = 4100000;
> +
> +     if (info.charge_current_ua > 0)
> +             pdata->charge_current_ua = info.charge_current_ua;
> +     else
> +             pdata->charge_current_ua = 500000;
> +
> +     ret = device_property_read_u32(charger->dev, "ti,ntc-type",
> +                                    &pdata->ntc_type);
> +     if (ret)
> +             pdata->ntc_type = 1;    /* 10k  (curve 2, B = 3480) */
> +
> +     return pdata;
> +}
> +#else /* CONFIG_OF */
> +static struct tps65217_charger_platform_data *tps65217_charger_pdata_init(
> +             struct tps65217_charger *charger)
> +{
> +     return NULL;
> +}
> +#endif /* CONFIG_OF */
> +
> [...]
>

Otherwise looks fine to me.

-- Sebastian

Attachment: signature.asc
Description: PGP signature

Reply via email to