On 2017-06-07 08:33, Han Xu wrote:
> On 06/06/2017 01:30 AM, Stefan Agner wrote:
>> Add i.MX 7 APBH DMA and GPMI NAND modules.
>>
>> Signed-off-by: Stefan Agner <[email protected]>
>> ---
>> arch/arm/boot/dts/imx7s.dtsi | 32 ++++++++++++++++++++++++++++++++
>> 1 file changed, 32 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
>> index c4f12fd..d71acd8 100644
>> --- a/arch/arm/boot/dts/imx7s.dtsi
>> +++ b/arch/arm/boot/dts/imx7s.dtsi
>> @@ -995,5 +995,37 @@
>> status = "disabled";
>> };
>> };
>> +
>> + dma_apbh: dma-apbh@33000000 {
>> + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
>> + reg = <0x33000000 0x2000>;
>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
>> + #dma-cells = <1>;
>> + dma-channels = <4>;
>> + clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
>> + clock-names = "dma_apbh_bch", "dma_apbh_io";
>
> please remove the clock names, I am good with all other changes.
Oh missed that, will do and send v6.
--
Stefan
>> + };
>> +
>> + gpmi: gpmi-nand@33002000{
>> + compatible = "fsl,imx7d-gpmi-nand";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
>> + reg-names = "gpmi-nand", "bch";
>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "bch";
>> + clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
>> + <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
>> + clock-names = "gpmi_io", "gpmi_bch_apb";
>> + dmas = <&dma_apbh 0>;
>> + dma-names = "rx-tx";
>> + status = "disabled";
>> + assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
>> + assigned-clock-parents = <&clks
>> IMX7D_PLL_ENET_MAIN_500M_CLK>;
>> + };
>> };
>> };
