Hi Markus, On 06/13/2017 03:37 PM, Markus Mayer wrote: > From: Markus Mayer <[email protected]> > > This driver allows access to DRAM properties, such as the refresh rate, > via the Broadcom STB DDR PHY Front End (DPFE). The refresh rate can be > used as indirect indicator of the DRAM temperature. > > The driver also allows setting of the sampling interval. > > Signed-off-by: Markus Mayer <[email protected]> > --- > MAINTAINERS | 8 + > drivers/soc/bcm/brcmstb/Makefile | 2 +- > drivers/soc/bcm/brcmstb/dpfe.c | 689 > +++++++++++++++++++++++++++++++++++++++ > 3 files changed, 698 insertions(+), 1 deletion(-) > create mode 100644 drivers/soc/bcm/brcmstb/dpfe.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index f7d568b..04f0be6 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -2864,6 +2864,14 @@ S: Maintained > F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt > F: drivers/cpufreq/brcmstb* > > +BROADCOM STB SOC DPFE DRIVER > +M: Markus Mayer <[email protected]> > +M: [email protected] > +L: [email protected] (moderated for non-subscribers) > +S: Maintained > +F: Documentation/devicetree/bindings/soc/bcm/brcm,dpfe-cpu.txt > +F: drivers/misc/brcmstb-dpfe.c
Just one nit: this should be drivers/soc/bcm/brcmstb/dpfe.c, other than that, I just need an Ack from Rob on the binding, and I will queue this up, thanks! -- Florian
