Hi, On Wed, Jun 14, 2017 at 11:25:55AM +0200, H. Nikolaus Schaller wrote: > This avoids a potential race if irqs are enabled and triggered too early > before the worker is properly set up. > > Suggested-by: Grygorii Strashko <[email protected]> > Signed-off-by: H. Nikolaus Schaller <[email protected]> > --- > drivers/power/supply/twl4030_charger.c | 28 ++++++++++++++-------------- > 1 file changed, 14 insertions(+), 14 deletions(-) > > diff --git a/drivers/power/supply/twl4030_charger.c > b/drivers/power/supply/twl4030_charger.c > index 1fbbe0cc216a..3bebeecb4a1f 100644 > --- a/drivers/power/supply/twl4030_charger.c > +++ b/drivers/power/supply/twl4030_charger.c > @@ -984,6 +984,16 @@ static int twl4030_bci_probe(struct platform_device > *pdev) > > platform_set_drvdata(pdev, bci); > > + if (bci->dev->of_node) { > + struct device_node *phynode; > + > + phynode = of_find_compatible_node(bci->dev->of_node->parent, > + NULL, "ti,twl4030-usb"); > + if (phynode) > + bci->transceiver = devm_usb_get_phy_by_node( > + bci->dev, phynode, &bci->usb_nb); > + } > +
The notifier is not that much different from an irq. I see
the call can access at least the iio channel (so iio channel
should be registered first). I suspect worker and power-supply
should also be initialized/registered first. Best location seems
to be directly before requesting the irqs.
> bci->channel_vac = devm_iio_channel_get(&pdev->dev, "vac");
> if (IS_ERR(bci->channel_vac)) {
> bci->channel_vac = NULL;
> @@ -1006,6 +1016,10 @@ static int twl4030_bci_probe(struct platform_device
> *pdev)
> return ret;
> }
>
> + INIT_WORK(&bci->work, twl4030_bci_usb_work);
> + INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
> +
> + bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
You should configure the notifier block *before* registering it.
> ret = devm_request_threaded_irq(&pdev->dev, bci->irq_chg, NULL,
> twl4030_charger_interrupt, IRQF_ONESHOT, pdev->name,
> bci);
> @@ -1023,20 +1037,6 @@ static int twl4030_bci_probe(struct platform_device
> *pdev)
> return ret;
> }
>
> - INIT_WORK(&bci->work, twl4030_bci_usb_work);
> - INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
> -
> - bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
> - if (bci->dev->of_node) {
> - struct device_node *phynode;
> -
> - phynode = of_find_compatible_node(bci->dev->of_node->parent,
> - NULL, "ti,twl4030-usb");
> - if (phynode)
> - bci->transceiver = devm_usb_get_phy_by_node(
> - bci->dev, phynode, &bci->usb_nb);
> - }
> -
> /* Enable interrupts now. */
> reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
> TWL4030_TBATOR1 | TWL4030_BATSTS);
-- Sebastian
signature.asc
Description: PGP signature
