On Thu, 15 Jun 2017, Hans de Goede wrote:

> From: Arnd Bergmann <[email protected]>
> 
> I ran into a build error on ARM with a platform that has a non-standard
> clk implementation:
> 
> drivers/clk/clk.o: In function `clk_disable':
> clk.c:(.text.clk_disable+0x0): multiple definition of `clk_disable'
> arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_disable+0x0): first defined 
> here
> drivers/clk/clk.o: In function `clk_enable':
> clk.c:(.text.clk_enable+0x0): multiple definition of `clk_enable'
> arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_enable+0x0): first defined here
> 
> The problem is a device driver that uses 'select COMMON_CLK', which is
> generally a bad idea: selecting a subsystem should only be done from
> a platform, otherwise we run into circular dependencies. The same driver
> also selects 'GPIOLIB' and 'I2C', which has a similar effect.
> 
> This turns all three into 'depends on', as it should be.
> 
> Finally, we can limit the build to x86, unless we are compile testing.
> 
> Fixes: 2f91ded5f8f4 ("mfd: Add Cherry Trail Whiskey Cove PMIC driver")
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Hans de Goede <[email protected]>
> ---
> Changes in v2:
> -Split into 2 seperate patches for config INTEL_SOC_PMIC and
>  config INTEL_SOC_PMIC_CHTWC
> ---
>  drivers/mfd/Kconfig | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 2499f8b5135a..1428814c33f9 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -481,13 +481,12 @@ config INTEL_SOC_PMIC_BXTWC
>         on these systems.
>  
>  config INTEL_SOC_PMIC_CHTWC
> -     bool "Support for Intel Cherry Trail Whiskey Cove PMIC"
> -     depends on ACPI && HAS_IOMEM
> +     tristate "Support for Intel Cherry Trail Whiskey Cove PMIC"
> +     depends on ACPI && HAS_IOMEM && I2C=y && COMMON_CLK
> +     depends on X86 || COMPILE_TEST
>       select MFD_CORE
> -     select I2C
>       select REGMAP_I2C
>       select REGMAP_IRQ
> -     select COMMON_CLK
>       select I2C_DESIGNWARE_PLATFORM
>       help
>         Select this option to enable support for the Intel Cherry Trail

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Reply via email to