Em Tue, Jun 20, 2017 at 01:43:56PM +0000, Liang, Kan escreveu: > Hi Arnaldo and Jirka, > > Ping. >> Any comments for the patch?
I thought there was a kernel part still outstanding, now I see it was already merged, will try it and provide comments. - Arnaldo > Thanks, > Kan > > > Subject: RE: [PATCH V2 0/2] measure SMI cost (user) > > > > Hi Jirka, > > > > Have you got a chance to try the code? > > Are you OK with the patch? > > > > Thanks, > > Kan > > > > > > > > Em Fri, Jun 02, 2017 at 03:45:11PM +0000, Liang, Kan escreveu: > > > > > > On Mon, May 29, 2017 at 02:52:39PM +0200, Peter Zijlstra wrote: > > > > > > > On Mon, May 29, 2017 at 02:46:37PM +0200, Jiri Olsa wrote: > > > > > > > > for some reason I can't get single SMI count generated, is > > > > > > > > there a setup/bench that would provoke that? > > > > > > > > > > Not having SMIs is a good thing ;-) Not sure we can tickle > > > > > > > them in a reliable way. > > > > > > > > > yea I saw some counts last time, now just zero so I was > > > > > > wondering if it's working > > > > > > > > We have internal test case which can generate SMI, but I cannot > > > > > publish the test case. Sorry about that. > > > > > > > APM_CNT (0xB2) could be used to trigger SMI#. > > > > > > Here if I run the following 'perf stat' command and press the mute > > > button (the one sharing F1 in a thinkpad t450s it triggers SMIs, > > > toggle it in quick sucession and it generates more, etc: > > > > > > [root@jouet ~]# perf stat -I 1000 -e msr/smi/ > > > # time counts unit events > > > 1.000103173 0 msr/smi/ > > > 2.000278816 4 msr/smi/ > > > 3.000472630 4 msr/smi/ > > > 4.000743916 0 msr/smi/ > > > 5.001369358 4 msr/smi/ > > > 6.001668033 0 msr/smi/ > > > 7.001852603 4 msr/smi/ > > > 8.002108269 12 msr/smi/ > > > 9.002367312 0 msr/smi/ > > > ^C 9.961897866 0 msr/smi/ > > > > > > [root@jouet ~]# > > > > > > - Arnaldo > > > > > > > It's documented in PCH datasheet. > > > > https://www.intel.com/content/dam/www/public/us/en/ > > > > documents/datasheets/9-series-chipset-pch-datasheet.pdf > > > > > > > > APM_CNT-Advanced Power Management Control Port Register I/O > > Address: > > > > B2h > > > > Attribute: R/W > > > > Default Value: 00h > > > > Size: 8 bits > > > > Lockable: No > > > > Usage: Legacy Only > > > > Power Well: Core > > > > Bit Description > > > > 7:0 Used to pass an APM command between the OS and the SMI handler. > > > > Writes to this port not only store data in the APMC register, but > > > > also generates an SMI# when the APMC_EN bit is set. > > > > > > > > You can write a byte to port 0xB2 to trigger an SMI# > > > > > > > > Thanks, > > > > Kan
