[PATCH 13/20] serial: stm32: fix error handling in probe

[Bich HEMON]

From: Bich Hemon <bich.he...@st.com>

Signed-off-by: Fabrice Gasnier <fabrice.gasn...@st.com>
---
 drivers/tty/serial/stm32-usart.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index c54b89d..a62fc95 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -779,8 +779,10 @@ static int stm32_init_port(struct stm32_port *stm32port,
                return ret;
 
        stm32port->port.uartclk = clk_get_rate(stm32port->clk);
-       if (!stm32port->port.uartclk)
+       if (!stm32port->port.uartclk) {
+               clk_disable_unprepare(stm32port->clk);
                ret = -EINVAL;
+       }
 
        return ret;
 }
@@ -964,7 +966,7 @@ static int stm32_serial_probe(struct platform_device *pdev)
 
        ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
        if (ret)
-               return ret;
+               goto err_uninit;
 
        ret = stm32_of_dma_rx_probe(stm32port, pdev);
        if (ret)
@@ -977,6 +979,11 @@ static int stm32_serial_probe(struct platform_device *pdev)
        platform_set_drvdata(pdev, &stm32port->port);
 
        return 0;
+
+err_uninit:
+       clk_disable_unprepare(stm32port->clk);
+
+       return ret;
 }
 
 static int stm32_serial_remove(struct platform_device *pdev)
-- 
1.9.1