The SdioAudio power domain includes the i2s/spdif/spi5/sdio. So this patch adds the pd control for rk3399 i2s/spdif/spi5/sdio, in order to save more power consumption.
Signed-off-by: Caesar Wang <w...@rock-chips.com> --- Changes note: - As the Jeffy fixes the spi'cs issue recently as follows: aa09938 spi: rockchip: Disable Runtime PM when chip select is asserted c863795 spi: rockchip: Set GPIO_SS flag to enable Slave Select with GPIO CS c351587 spi: rockchip: fix error handling when probe - Posted this CL to support the SdioAudio power domain as commnets on https://chromium-review.googlesource.com/#/c/378562/ arch/arm64/boot/dts/rockchip/rk3399.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 33e17d7..a1dd0da 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -289,6 +289,7 @@ fifo-depth = <0x100>; resets = <&cru SRST_SDIO0>; reset-names = "reset"; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; @@ -678,6 +679,7 @@ pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; @@ -952,6 +954,11 @@ <&cru SCLK_SDMMC>; pm_qos = <&qos_sd>; }; + pd_sdioaudio@RK3399_PD_SDIOAUDIO { + reg = <RK3399_PD_SDIOAUDIO>; + clocks = <&cru HCLK_SDIO>; + pm_qos = <&qos_sdioaudio>; + }; pd_vio@RK3399_PD_VIO { reg = <RK3399_PD_VIO>; #address-cells = <1>; @@ -1372,6 +1379,7 @@ clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>; pinctrl-names = "default"; pinctrl-0 = <&spdif_bus>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; @@ -1386,6 +1394,7 @@ clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_8ch_bus>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; @@ -1399,6 +1408,7 @@ clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>; pinctrl-names = "default"; pinctrl-0 = <&i2s1_2ch_bus>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; @@ -1410,6 +1420,7 @@ dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; -- 2.7.4
