In some MSC CV tests device sending ZLP IN on non EP0 which reassigning EP0 OUT descriptor pointer to that EP. Dedicated for EP0 OUT descriptor multiple time re-used by other EP while that descriptor already in use by EP0 OUT for SETUP transaction. As result when SETUP packet received BNA interrupt asserting.
In dwc2_hsotg_program_zlp() function dwc2_gadget_set_ep0_desc_chain() must be called only for EP0. Signed-off-by: Minas Harutyunyan <[email protected]> --- drivers/usb/dwc2/gadget.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 98a4a79e7f6e..3dc08f6847df 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -1943,7 +1943,9 @@ static void dwc2_hsotg_program_zlp(struct dwc2_hsotg *hsotg, /* Not specific buffer needed for ep0 ZLP */ dma_addr_t dma = hs_ep->desc_list_dma; - dwc2_gadget_set_ep0_desc_chain(hsotg, hs_ep); + if (!index) + dwc2_gadget_set_ep0_desc_chain(hsotg, hs_ep); + dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, dma, 0); } else { dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | -- 2.11.0
