On 05/07/2017 at 17:23, Ludovic Desroches wrote:
> On Mon, Jul 03, 2017 at 03:56:11PM +0300, Claudiu Beznea wrote:
>> Add specific DTS file and bindings for sama5d27 SoM1 board.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
>> Signed-off-by: Cristian Birsan <cristian.bir...@microchip.com>
>> ---
>> arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178
>> ++++++++++++++++++++++++++++++
>> 1 file changed, 178 insertions(+)
>> create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>>
>> diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>> b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>> new file mode 100644
>> index 0000000..c3a1dc8
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>
> [...]
>
>> +
>> + i2c0: i2c@f8028000 {
>> + dmas = <0>, <0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2c0_default>;
>> + i2c-sda-hold-time-ns = <350>;
>> + status = "disabled";
>> +
>> + 24aa@50 {
>> + compatible = "24mac602";
>> + reg = <0x50>;
>> + pagesize = <8>;
>> + start-offset = /bits/ 8 <0xf8>;
>
> Are you sure about the offset? I thought it was 0xfa but maybe I am
> wrong.
Moreover, as the binding for this is not yet accepted I would advice to
remove this part for now. It will be easier for synchronization with i2c
eeprom.
Best regards,
--
Nicolas Ferre
