[PATCH 2/2] ARM: dts: stm32: enable ADC on stm32h743i-eval board

[Fabrice Gasnier]

There's a potentiometer connected to ADC1 and ADC2 in0 on
stm32h743i-eval board.
- Add fixed-voltage 'vdda' regulator that supplies 'vref' pin.
  It's used as voltage reference for ADC and/or DAC.
- Enable ADC1 in0 input (arbitrary choice: could be ADC2 as well).
Note: No pinctrl is needed to use in0 dedicated analog input pin
(e.g. ADC12_INP0).

Signed-off-by: Fabrice Gasnier <fabrice.gasn...@st.com>
---
 arch/arm/boot/dts/stm32h743i-eval.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts 
b/arch/arm/boot/dts/stm32h743i-eval.dts
index c6effbb..6c07786 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -60,6 +60,24 @@
        aliases {
                serial0 = &usart1;
        };
+
+       vdda: regulator-vdda {
+               compatible = "regulator-fixed";
+               regulator-name = "vdda";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+       };
+};
+
+&adc_12 {
+       vref-supply = <&vdda>;
+       status = "okay";
+       adc1: adc@0 {
+               /* potentiometer */
+               st,adc-channels = <0>;
+               status = "okay";
+       };
 };
 
 &clk_hse {
-- 
1.9.1