On Wed, 19 Jul 2017, Chen-Yu Tsai wrote: > On Tue, Jul 18, 2017 at 5:53 PM, Lee Jones <lee.jo...@linaro.org> wrote: > > On Tue, 18 Jul 2017, Chen-Yu Tsai wrote: > > > >> On Tue, Jul 18, 2017 at 3:25 PM, Quentin Schulz > >> <quentin.sch...@free-electrons.com> wrote: > >> > Hi Lee, > >> > > >> > On 18/07/2017 09:18, Lee Jones wrote: > >> >> On Mon, 17 Jul 2017, Quentin Schulz wrote: > >> >> > >> >>> Hi all, > >> >>> > >> >>> On 17/07/2017 11:53, Quentin Schulz wrote: > >> >>>> According to their datasheets, the AXP221, AXP223, AXP288, AXP803, > >> >>>> AXP809 and AXP813 PEK have different values for startup time bits from > >> >>>> the AXP20X PEK (which are currently used for all the aforementioned > >> >>>> PMICs). > >> >>>> > >> >>>> This patch series adds support for platform_device_id to axp20x-pek > >> >>>> driver > >> >>>> to support different startup time bits depending on PMIC's variant > >> >>>> and set > >> >>>> the correct platform_device_id in the mfd. > >> >>>> > >> >>>> This has been tested on AXP813. To perform the test, modify the value > >> >>>> of > >> >>>> startup and/or shutdown of the pek in sysfs. Press the button > >> >>>> soldered to > >> >>>> PEK input of the AXP the amount of time you set in sysfs. The PMIC > >> >>>> shuts > >> >>>> down the board without needing to unplug any power supply. Press PEK > >> >>>> button > >> >>>> the amount of time you set in sysfs for startup and the PMIC will > >> >>>> start the > >> >>>> board. Note that the time bits are obivoulsy hardware reset to their > >> >>>> default when you unplug all power supplies from the board. > >> >>>> > >> >>> > >> >>> I forgot to add that it depends on this patch series (particularly the > >> >>> third patch (3/6) "mfd: axp20x: Add support for AXP813 PMIC") from > >> >>> Chen-Yu: > >> >>> https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1428284.html > >> >> > >> >> So you are going to re-send? > >> >> > >> > > >> > You put your acked-by just yesterday on this patch. Do I need to resend > >> > it anyway? > >> > > >> > The link I provided seems to be really slow/not working today, so I give > >> > you another one for reference: > >> > https://patchwork.kernel.org/patch/9803439/ > >> > >> Or rather, would you like me to merge the AXP813 changes into my next > >> version, and you resend the rest for faster separate inclusion? > > > > What I'd really like is for one of you to collect up the patches which > > depend on each other (in the correct order of course), along with the > > Acks you've obtained and send as a single set. That way, I am less > > likely to mess up the ordering when applying. > > I'll include the mfd patch in my axp813 series.
Wonderful, thank you! > Quentin, please send only the input driver for v2. > > ChenYu > > > > >> >>>> Quentin Schulz (2): > >> >>>> Input: axp20x-pek: add support for AXP221 PEK > >> >>>> mfd: axp20x: use correct platform device id for many PEK > >> >>>> > >> >>>> drivers/input/misc/axp20x-pek.c | 62 > >> >>>> ++++++++++++++++++++++++++++++++++------- > >> >>>> drivers/mfd/axp20x.c | 12 ++++---- > >> >>>> 2 files changed, 58 insertions(+), 16 deletions(-) > >> >>>> > >> >>> > >> >> > >> > > > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog