[PATCH 05/10] arm64: zynqmp: Add CCI-400 node

[Michal Simek]

Add CCI-400 node to DTSI.

Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi 
b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 3657fdbdb552..f3968737e613 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -170,6 +170,25 @@
                        rx-fifo-depth = <0x40>;
                };
 
+               cci: cci@fd6e0000 {
+                       compatible = "arm,cci-400";
+                       reg = <0x0 0xfd6e0000 0x0 0x9000>;
+                       ranges = <0x0 0x0 0xfd6e0000 0x10000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       pmu@9000 {
+                               compatible = "arm,cci-400-pmu,r1";
+                               reg = <0x9000 0x5000>;
+                               interrupt-parent = <&gic>;
+                               interrupts = <0 123 4>,
+                                            <0 123 4>,
+                                            <0 123 4>,
+                                            <0 123 4>,
+                                            <0 123 4>;
+                       };
+               };
+
                gem0: ethernet@ff0b0000 {
                        compatible = "cdns,gem";
                        status = "disabled";
-- 
1.9.1