Now that the clock source 0 is properly described in the CCF, use it instead of assuming the default value (xtal)
Signed-off-by: Jerome Brunet <[email protected]> --- This patchset depends on clock patchset adding the related clocks: * https://lkml.kernel.org/r/[email protected] arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 +++--- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 17d3efdf1469..9a1e478f80d5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -652,21 +652,21 @@ &sd_emmc_a { clocks = <&clkc CLKID_SD_EMMC_A>, - <&xtal>, + <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_b { clocks = <&clkc CLKID_SD_EMMC_B>, - <&xtal>, + <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_c { clocks = <&clkc CLKID_SD_EMMC_C>, - <&xtal>, + <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 8d4f3160a0ee..071eca074a91 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -593,21 +593,21 @@ &sd_emmc_a { clocks = <&clkc CLKID_SD_EMMC_A>, - <&xtal>, + <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_b { clocks = <&clkc CLKID_SD_EMMC_B>, - <&xtal>, + <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_c { clocks = <&clkc CLKID_SD_EMMC_C>, - <&xtal>, + <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; -- 2.9.4
