[PATCH v3 10/11] ARM64: dts: rockchip: Add gmac2phy node support for rk3328

[David Wu]

The gmac2phy controller of rk3328 is connected to internal phy
directly inside, add the node for the internal phy support.

Signed-off-by: David Wu <david...@rock-chips.com>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi 
b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 0be96ce..51c8c66 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -63,6 +63,8 @@
                i2c1 = &i2c1;
                i2c2 = &i2c2;
                i2c3 = &i2c3;
+               ethernet0 = &gmac2io;
+               ethernet1 = &gmac2phy;
        };
 
        cpus {
@@ -424,6 +426,29 @@
                status = "disabled";
        };
 
+       gmac2phy: eth@ff550000 {
+               compatible = "rockchip,rk3328-gmac";
+               reg = <0x0 0xff550000 0x0 0x10000>;
+               rockchip,grf = <&grf>;
+               interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-names = "macirq";
+               clocks = <&cru SCLK_MAC2PHY_SRC>, <&cru SCLK_MAC2PHY_RXTX>,
+                        <&cru SCLK_MAC2PHY_RXTX>, <&cru SCLK_MAC2PHY_REF>,
+                        <&cru ACLK_MAC2PHY>, <&cru PCLK_MAC2PHY>,
+                        <&cru SCLK_MAC2PHY_OUT>;
+               clock-names = "stmmaceth", "mac_clk_rx",
+                             "mac_clk_tx", "clk_mac_ref",
+                             "aclk_mac", "pclk_mac",
+                             "clk_macphy";
+               resets = <&cru SRST_GMAC2PHY_A>, <&cru SRST_MACPHY>;
+               reset-names = "stmmaceth", "mac-phy";
+               phy-mode = "rmii";
+               phy-is-internal;
+               pinctrl-names = "default";
+               pinctrl-0 = <&fephyled_rxm1 &fephyled_linkm1>;
+               status = "disabled";
+       };
+
        gic: interrupt-controller@ff811000 {
                compatible = "arm,gic-400";
                #interrupt-cells = <3>;
-- 
1.9.1