On Tue, Jul 18, 2017 at 02:48:21PM +0800, Jisheng Zhang wrote:
> The ATU CTRL2 register is 32 bit, besides the enable bit, other bits
> may also be set. To check whether the ATU is enabled or not, we should
> test the enable bit.
>
> Signed-off-by: Jisheng Zhang <jszh...@marvell.com>
> Acked-by: Joao Pinto <jpi...@synopsys.com>
Applied with Jingoo's ack to pci/host-designware for v4.14, thanks!
> ---
> Since v1:
> - Add Joao's Ack
> - Fix typo in commit msg, thank Jingoo
>
> drivers/pci/dwc/pcie-designware.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pci/dwc/pcie-designware.c
> b/drivers/pci/dwc/pcie-designware.c
> index 0e03af279259..6bf0b409050a 100644
> --- a/drivers/pci/dwc/pcie-designware.c
> +++ b/drivers/pci/dwc/pcie-designware.c
> @@ -177,7 +177,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int
> index, int type,
> */
> for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
> - if (val == PCIE_ATU_ENABLE)
> + if (val & PCIE_ATU_ENABLE)
> return;
>
> usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
> --
> 2.13.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
