Teach the driver's tuneproc() method to do PIO auto-runing properly since it
treated 5 instead of 255 as auto-tune request, and also passed the mode limit
of PIO5 to ide_get_best_pio_mode() despite supporting up to PIO4 only.

While at it, also:

- remove the driver's wrong claim about supporting SWDMA modes;

- stop hooking ide_dma_timeout() method as the handler clearly doesn't fit for
  the task...

Signed-off-by: Sergei Shtylyov <[EMAIL PROTECTED]>

---
Warning: the patch has only been compile tested (the driver was on the way of
some cleanup -- that's why I got around to fixing it :-).

 drivers/ide/pci/aec62xx.c |   22 ++++++----------------
 1 files changed, 6 insertions(+), 16 deletions(-)

Index: linux-2.6/drivers/ide/pci/aec62xx.c
===================================================================
--- linux-2.6.orig/drivers/ide/pci/aec62xx.c
+++ linux-2.6/drivers/ide/pci/aec62xx.c
@@ -1,7 +1,8 @@
 /*
- * linux/drivers/ide/pci/aec62xx.c             Version 0.11    March 27, 2002
+ * linux/drivers/ide/pci/aec62xx.c             Version 0.21    Apr 21, 2007
  *
  * Copyright (C) 1999-2002     Andre Hedrick <[EMAIL PROTECTED]>
+ * Copyright (C) 2007          MontaVista Software, Inc. <[EMAIL PROTECTED]>
  *
  */
 
@@ -193,18 +194,8 @@ static int config_chipset_for_dma (ide_d
 
 static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
 {
-       u8 speed = 0;
-       u8 new_pio = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL);
-
-       switch(pio) {
-               case 5:         speed = new_pio; break;
-               case 4:         speed = XFER_PIO_4; break;
-               case 3:         speed = XFER_PIO_3; break;
-               case 2:         speed = XFER_PIO_2; break;
-               case 1:         speed = XFER_PIO_1; break;
-               default:        speed = XFER_PIO_0; break;
-       }
-       (void) aec62xx_tune_chipset(drive, speed);
+       pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+       (void) aec62xx_tune_chipset(drive, pio + XFER_PIO_0);
 }
 
 static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
@@ -213,7 +204,7 @@ static int aec62xx_config_drive_xfer_rat
                return 0;
 
        if (ide_use_fast_pio(drive))
-               aec62xx_tune_drive(drive, 5);
+               aec62xx_tune_drive(drive, 255);
 
        return -1;
 }
@@ -288,11 +279,10 @@ static void __devinit init_hwif_aec62xx(
 
        hwif->ultra_mask = 0x7f;
        hwif->mwdma_mask = 0x07;
-       hwif->swdma_mask = 0x07;
 
        hwif->ide_dma_check     = &aec62xx_config_drive_xfer_rate;
        hwif->ide_dma_lostirq   = &aec62xx_irq_timeout;
-       hwif->ide_dma_timeout   = &aec62xx_irq_timeout;
+
        if (!noautodma)
                hwif->autodma = 1;
        hwif->drives[0].autodma = hwif->autodma;

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to