Anything higher then 5V may damage hardware not capable of it, so
the only sane default here is 5V. If a board is able to handle a
higher voltage that should come from board specific data such as
device-tree and not be hard coded into the fusb302 code.

Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
 drivers/staging/typec/fusb302/fusb302.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/typec/fusb302/fusb302.c 
b/drivers/staging/typec/fusb302/fusb302.c
index 03a3809d18f0..6baed06a3c0d 100644
--- a/drivers/staging/typec/fusb302/fusb302.c
+++ b/drivers/staging/typec/fusb302/fusb302.c
@@ -1187,9 +1187,9 @@ static const struct tcpc_config fusb302_tcpc_config = {
        .nr_src_pdo = ARRAY_SIZE(src_pdo),
        .snk_pdo = snk_pdo,
        .nr_snk_pdo = ARRAY_SIZE(snk_pdo),
-       .max_snk_mv = 9000,
+       .max_snk_mv = 5000,
        .max_snk_ma = 3000,
-       .max_snk_mw = 27000,
+       .max_snk_mw = 15000,
        .operating_snk_mw = 2500,
        .type = TYPEC_PORT_DRP,
        .default_role = TYPEC_SINK,
-- 
2.13.3

Reply via email to