Please hold off on reviewing this patch.
Patch went wrong while rebasing.

Thanks,
Badhri

On Thu, Aug 10, 2017 at 3:06 PM, Badhri Jagan Sridharan
<bad...@google.com> wrote:
> While performing PORT_RESET, upon receiving the cc disconnect
> signal from the underlaying tcpc device, TCPM transitions into
> unattached state. Consider, the current type of port while determining
> the unattached state.
>
> In the below logs, although the port_type was set to sink, TCPM
> transitioned into SRC_UNATTACHED.
>
> [  762.290654] state change SRC_READY -> PORT_RESET
> [  762.324531] Setting voltage/current limit 0 mV 0 mA
> [  762.327912] polarity 0
> [  762.334864] cc:=0
> [  762.347193] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms
> [  762.347200] VBUS off
> [  762.347203] CC1: 2 -> 0, CC2: 0 -> 0 [state PORT_RESET, polarity 0, 
> disconnected]
> [  762.347206] state change PORT_RESET -> SRC_UNATTACHED
>
> Signed-off-by: Badhri Jagan Sridharan <bad...@google.com>
> ---
>  drivers/staging/typec/tcpm.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c
> index 20eb4ebcf8c3..4c526341d850 100644
> --- a/drivers/staging/typec/tcpm.c
> +++ b/drivers/staging/typec/tcpm.c
> @@ -2099,10 +2099,16 @@ static inline enum tcpm_state ready_state(struct 
> tcpm_port *port)
>
>  static inline enum tcpm_state unattached_state(struct tcpm_port *port)
>  {
> -       if (port->pwr_role == TYPEC_SOURCE)
> +       if (port->port_type == TYPEC_PORT_DRP) {
> +               if (port->pwr_role == TYPEC_SOURCE)
> +                       return SRC_UNATTACHED;
> +               else
> +                       return SNK_UNATTACHED;
> +       } else if (port->port_type == TYPEC_PORT_DFP) {
>                 return SRC_UNATTACHED;
> -       else
> +       } else {
>                 return SNK_UNATTACHED;
> +       }
>  }
>
>  static void tcpm_check_send_discover(struct tcpm_port *port)
> --
> 2.14.0.434.g98096fd7a8-goog
>

Reply via email to