Hi Rob,

On 2017/8/11 1:06, Rob Herring wrote:
On Thu, Aug 03, 2017 at 04:09:12PM +0800, Frank Wang wrote:
Add otg-mux property to support multiplexed interrupt in otg-port
on some Rockchip SoC (e.g RV1108).

Signed-off-by: Frank Wang <frank.w...@rock-chips.com>
---
  Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt | 6 +++++-
  1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt 
b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
index ddf868a..ed6aee4 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -32,10 +32,14 @@ Required nodes : a sub-node is required for each port the 
phy provides.
  Required properties (port (child) node):
   - #phy-cells : must be 0. See ./phy-bindings.txt for details.
   - interrupts : specify an interrupt for each entry in interrupt-names.
- - interrupt-names : a list which shall be the following entries:
+ - interrupt-names : a list which should be one of the following cases:
+       Regular case:
        * "otg-id" : for the otg id interrupt.
        * "otg-bvalid" : for the otg vbus interrupt.
        * "linestate" : for the host/otg linestate interrupt.
+       Some SoCs use one interrupt with the obove muxed together, so for these
s/obove/above/

Sorry, thanks for your reminding and will fix.


BR.
Frank


With that,

Acked-by: Rob Herring <r...@kernel.org>





Reply via email to