It removes mlxcpld-hotplug. Signed-off-by: Vadim Pasternak <[email protected]> --- MAINTAINERS | 7 - drivers/platform/x86/mlxcpld-hotplug.c | 515 -------------------------- include/linux/platform_data/mlxcpld-hotplug.h | 99 ----- 3 files changed, 621 deletions(-) delete mode 100644 drivers/platform/x86/mlxcpld-hotplug.c delete mode 100644 include/linux/platform_data/mlxcpld-hotplug.h
diff --git a/MAINTAINERS b/MAINTAINERS index ccc7fa3..1944239 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8579,13 +8579,6 @@ L: [email protected] S: Supported F: drivers/platform/x86/mlx-platform.c -MELLANOX MLX CPLD HOTPLUG DRIVER -M: Vadim Pasternak <[email protected]> -L: [email protected] -S: Supported -F: drivers/platform/x86/mlxcpld-hotplug.c -F: include/linux/platform_data/mlxcpld-hotplug.h - SOFT-ROCE DRIVER (rxe) M: Moni Shoua <[email protected]> L: [email protected] diff --git a/drivers/platform/x86/mlxcpld-hotplug.c b/drivers/platform/x86/mlxcpld-hotplug.c deleted file mode 100644 index aff3686..0000000 --- a/drivers/platform/x86/mlxcpld-hotplug.c +++ /dev/null @@ -1,515 +0,0 @@ -/* - * drivers/platform/x86/mlxcpld-hotplug.c - * Copyright (c) 2016 Mellanox Technologies. All rights reserved. - * Copyright (c) 2016 Vadim Pasternak <[email protected]> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the names of the copyright holders nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/bitops.h> -#include <linux/device.h> -#include <linux/hwmon.h> -#include <linux/hwmon-sysfs.h> -#include <linux/i2c.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/platform_data/mlxcpld-hotplug.h> -#include <linux/platform_device.h> -#include <linux/spinlock.h> -#include <linux/wait.h> -#include <linux/workqueue.h> - -/* Offset of event and mask registers from status register */ -#define MLXCPLD_HOTPLUG_EVENT_OFF 1 -#define MLXCPLD_HOTPLUG_MASK_OFF 2 -#define MLXCPLD_HOTPLUG_AGGR_MASK_OFF 1 - -#define MLXCPLD_HOTPLUG_ATTRS_NUM 8 - -/** - * enum mlxcpld_hotplug_attr_type - sysfs attributes for hotplug events: - * @MLXCPLD_HOTPLUG_ATTR_TYPE_PSU: power supply unit attribute; - * @MLXCPLD_HOTPLUG_ATTR_TYPE_PWR: power cable attribute; - * @MLXCPLD_HOTPLUG_ATTR_TYPE_FAN: FAN drawer attribute; - */ -enum mlxcpld_hotplug_attr_type { - MLXCPLD_HOTPLUG_ATTR_TYPE_PSU, - MLXCPLD_HOTPLUG_ATTR_TYPE_PWR, - MLXCPLD_HOTPLUG_ATTR_TYPE_FAN, -}; - -/** - * struct mlxcpld_hotplug_priv_data - platform private data: - * @irq: platform interrupt number; - * @pdev: platform device; - * @plat: platform data; - * @hwmon: hwmon device; - * @mlxcpld_hotplug_attr: sysfs attributes array; - * @mlxcpld_hotplug_dev_attr: sysfs sensor device attribute array; - * @group: sysfs attribute group; - * @groups: list of sysfs attribute group for hwmon registration; - * @dwork: delayed work template; - * @lock: spin lock; - * @aggr_cache: last value of aggregation register status; - * @psu_cache: last value of PSU register status; - * @pwr_cache: last value of power register status; - * @fan_cache: last value of FAN register status; - */ -struct mlxcpld_hotplug_priv_data { - int irq; - struct platform_device *pdev; - struct mlxcpld_hotplug_platform_data *plat; - struct device *hwmon; - struct attribute *mlxcpld_hotplug_attr[MLXCPLD_HOTPLUG_ATTRS_NUM + 1]; - struct sensor_device_attribute_2 - mlxcpld_hotplug_dev_attr[MLXCPLD_HOTPLUG_ATTRS_NUM]; - struct attribute_group group; - const struct attribute_group *groups[2]; - struct delayed_work dwork; - spinlock_t lock; - u8 aggr_cache; - u8 psu_cache; - u8 pwr_cache; - u8 fan_cache; -}; - -static ssize_t mlxcpld_hotplug_attr_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct platform_device *pdev = to_platform_device(dev); - struct mlxcpld_hotplug_priv_data *priv = platform_get_drvdata(pdev); - int index = to_sensor_dev_attr_2(attr)->index; - int nr = to_sensor_dev_attr_2(attr)->nr; - u8 reg_val = 0; - - switch (nr) { - case MLXCPLD_HOTPLUG_ATTR_TYPE_PSU: - /* Bit = 0 : PSU is present. */ - reg_val = !!!(inb(priv->plat->psu_reg_offset) & BIT(index)); - break; - - case MLXCPLD_HOTPLUG_ATTR_TYPE_PWR: - /* Bit = 1 : power cable is attached. */ - reg_val = !!(inb(priv->plat->pwr_reg_offset) & BIT(index % - priv->plat->pwr_count)); - break; - - case MLXCPLD_HOTPLUG_ATTR_TYPE_FAN: - /* Bit = 0 : FAN is present. */ - reg_val = !!!(inb(priv->plat->fan_reg_offset) & BIT(index % - priv->plat->fan_count)); - break; - } - - return sprintf(buf, "%u\n", reg_val); -} - -#define PRIV_ATTR(i) priv->mlxcpld_hotplug_attr[i] -#define PRIV_DEV_ATTR(i) priv->mlxcpld_hotplug_dev_attr[i] -static int mlxcpld_hotplug_attr_init(struct mlxcpld_hotplug_priv_data *priv) -{ - int num_attrs = priv->plat->psu_count + priv->plat->pwr_count + - priv->plat->fan_count; - int i; - - priv->group.attrs = devm_kzalloc(&priv->pdev->dev, num_attrs * - sizeof(struct attribute *), - GFP_KERNEL); - if (!priv->group.attrs) - return -ENOMEM; - - for (i = 0; i < num_attrs; i++) { - PRIV_ATTR(i) = &PRIV_DEV_ATTR(i).dev_attr.attr; - - if (i < priv->plat->psu_count) { - PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev, - GFP_KERNEL, "psu%u", i + 1); - PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_PSU; - } else if (i < priv->plat->psu_count + priv->plat->pwr_count) { - PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev, - GFP_KERNEL, "pwr%u", i % - priv->plat->pwr_count + 1); - PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_PWR; - } else { - PRIV_ATTR(i)->name = devm_kasprintf(&priv->pdev->dev, - GFP_KERNEL, "fan%u", i % - priv->plat->fan_count + 1); - PRIV_DEV_ATTR(i).nr = MLXCPLD_HOTPLUG_ATTR_TYPE_FAN; - } - - if (!PRIV_ATTR(i)->name) { - dev_err(&priv->pdev->dev, "Memory allocation failed for sysfs attribute %d.\n", - i + 1); - return -ENOMEM; - } - - PRIV_DEV_ATTR(i).dev_attr.attr.name = PRIV_ATTR(i)->name; - PRIV_DEV_ATTR(i).dev_attr.attr.mode = S_IRUGO; - PRIV_DEV_ATTR(i).dev_attr.show = mlxcpld_hotplug_attr_show; - PRIV_DEV_ATTR(i).index = i; - sysfs_attr_init(&PRIV_DEV_ATTR(i).dev_attr.attr); - } - - priv->group.attrs = priv->mlxcpld_hotplug_attr; - priv->groups[0] = &priv->group; - priv->groups[1] = NULL; - - return 0; -} - -static int mlxcpld_hotplug_device_create(struct device *dev, - struct mlxcpld_hotplug_device *item) -{ - item->adapter = i2c_get_adapter(item->bus); - if (!item->adapter) { - dev_err(dev, "Failed to get adapter for bus %d\n", - item->bus); - return -EFAULT; - } - - item->client = i2c_new_device(item->adapter, &item->brdinfo); - if (!item->client) { - dev_err(dev, "Failed to create client %s at bus %d at addr 0x%02x\n", - item->brdinfo.type, item->bus, item->brdinfo.addr); - i2c_put_adapter(item->adapter); - item->adapter = NULL; - return -EFAULT; - } - - return 0; -} - -static void mlxcpld_hotplug_device_destroy(struct mlxcpld_hotplug_device *item) -{ - if (item->client) { - i2c_unregister_device(item->client); - item->client = NULL; - } - - if (item->adapter) { - i2c_put_adapter(item->adapter); - item->adapter = NULL; - } -} - -static inline void -mlxcpld_hotplug_work_helper(struct device *dev, - struct mlxcpld_hotplug_device *item, u8 is_inverse, - u16 offset, u8 mask, u8 *cache) -{ - u8 val, asserted; - int bit; - - /* Mask event. */ - outb(0, offset + MLXCPLD_HOTPLUG_MASK_OFF); - /* Read status. */ - val = inb(offset) & mask; - asserted = *cache ^ val; - *cache = val; - - /* - * Validate if item related to received signal type is valid. - * It should never happen, excepted the situation when some - * piece of hardware is broken. In such situation just produce - * error message and return. Caller must continue to handle the - * signals from other devices if any. - */ - if (unlikely(!item)) { - dev_err(dev, "False signal is received: register at offset 0x%02x, mask 0x%02x.\n", - offset, mask); - return; - } - - for_each_set_bit(bit, (unsigned long *)&asserted, 8) { - if (val & BIT(bit)) { - if (is_inverse) - mlxcpld_hotplug_device_destroy(item + bit); - else - mlxcpld_hotplug_device_create(dev, item + bit); - } else { - if (is_inverse) - mlxcpld_hotplug_device_create(dev, item + bit); - else - mlxcpld_hotplug_device_destroy(item + bit); - } - } - - /* Acknowledge event. */ - outb(0, offset + MLXCPLD_HOTPLUG_EVENT_OFF); - /* Unmask event. */ - outb(mask, offset + MLXCPLD_HOTPLUG_MASK_OFF); -} - -/* - * mlxcpld_hotplug_work_handler - performs traversing of CPLD interrupt - * registers according to the below hierarchy schema: - * - * Aggregation registers (status/mask) - * PSU registers: *---* - * *-----------------* | | - * |status/event/mask|----->| * | - * *-----------------* | | - * Power registers: | | - * *-----------------* | | - * |status/event/mask|----->| * |---> CPU - * *-----------------* | | - * FAN registers: - * *-----------------* | | - * |status/event/mask|----->| * | - * *-----------------* | | - * *---* - * In case some system changed are detected: FAN in/out, PSU in/out, power - * cable attached/detached, relevant device is created or destroyed. - */ -static void mlxcpld_hotplug_work_handler(struct work_struct *work) -{ - struct mlxcpld_hotplug_priv_data *priv = container_of(work, - struct mlxcpld_hotplug_priv_data, dwork.work); - u8 val, aggr_asserted; - unsigned long flags; - - /* Mask aggregation event. */ - outb(0, priv->plat->top_aggr_offset + MLXCPLD_HOTPLUG_AGGR_MASK_OFF); - /* Read aggregation status. */ - val = inb(priv->plat->top_aggr_offset) & priv->plat->top_aggr_mask; - aggr_asserted = priv->aggr_cache ^ val; - priv->aggr_cache = val; - - /* Handle PSU configuration changes. */ - if (aggr_asserted & priv->plat->top_aggr_psu_mask) - mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->psu, - 1, priv->plat->psu_reg_offset, - priv->plat->psu_mask, - &priv->psu_cache); - - /* Handle power cable configuration changes. */ - if (aggr_asserted & priv->plat->top_aggr_pwr_mask) - mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->pwr, - 0, priv->plat->pwr_reg_offset, - priv->plat->pwr_mask, - &priv->pwr_cache); - - /* Handle FAN configuration changes. */ - if (aggr_asserted & priv->plat->top_aggr_fan_mask) - mlxcpld_hotplug_work_helper(&priv->pdev->dev, priv->plat->fan, - 1, priv->plat->fan_reg_offset, - priv->plat->fan_mask, - &priv->fan_cache); - - if (aggr_asserted) { - spin_lock_irqsave(&priv->lock, flags); - - /* - * It is possible, that some signals have been inserted, while - * interrupt has been masked by mlxcpld_hotplug_work_handler. - * In this case such signals will be missed. In order to handle - * these signals delayed work is canceled and work task - * re-scheduled for immediate execution. It allows to handle - * missed signals, if any. In other case work handler just - * validates that no new signals have been received during - * masking. - */ - cancel_delayed_work(&priv->dwork); - schedule_delayed_work(&priv->dwork, 0); - - spin_unlock_irqrestore(&priv->lock, flags); - - return; - } - - /* Unmask aggregation event (no need acknowledge). */ - outb(priv->plat->top_aggr_mask, priv->plat->top_aggr_offset + - MLXCPLD_HOTPLUG_AGGR_MASK_OFF); -} - -static void mlxcpld_hotplug_set_irq(struct mlxcpld_hotplug_priv_data *priv) -{ - /* Clear psu presense event. */ - outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF); - /* Set psu initial status as mask and unmask psu event. */ - priv->psu_cache = priv->plat->psu_mask; - outb(priv->plat->psu_mask, priv->plat->psu_reg_offset + - MLXCPLD_HOTPLUG_MASK_OFF); - - /* Clear power cable event. */ - outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF); - /* Keep power initial status as zero and unmask power event. */ - outb(priv->plat->pwr_mask, priv->plat->pwr_reg_offset + - MLXCPLD_HOTPLUG_MASK_OFF); - - /* Clear fan presense event. */ - outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF); - /* Set fan initial status as mask and unmask fan event. */ - priv->fan_cache = priv->plat->fan_mask; - outb(priv->plat->fan_mask, priv->plat->fan_reg_offset + - MLXCPLD_HOTPLUG_MASK_OFF); - - /* Keep aggregation initial status as zero and unmask events. */ - outb(priv->plat->top_aggr_mask, priv->plat->top_aggr_offset + - MLXCPLD_HOTPLUG_AGGR_MASK_OFF); - - /* Invoke work handler for initializing hot plug devices setting. */ - mlxcpld_hotplug_work_handler(&priv->dwork.work); - - enable_irq(priv->irq); -} - -static void mlxcpld_hotplug_unset_irq(struct mlxcpld_hotplug_priv_data *priv) -{ - int i; - - disable_irq(priv->irq); - cancel_delayed_work_sync(&priv->dwork); - - /* Mask aggregation event. */ - outb(0, priv->plat->top_aggr_offset + MLXCPLD_HOTPLUG_AGGR_MASK_OFF); - - /* Mask psu presense event. */ - outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF); - /* Clear psu presense event. */ - outb(0, priv->plat->psu_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF); - - /* Mask power cable event. */ - outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF); - /* Clear power cable event. */ - outb(0, priv->plat->pwr_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF); - - /* Mask fan presense event. */ - outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_MASK_OFF); - /* Clear fan presense event. */ - outb(0, priv->plat->fan_reg_offset + MLXCPLD_HOTPLUG_EVENT_OFF); - - /* Remove all the attached devices. */ - for (i = 0; i < priv->plat->psu_count; i++) - mlxcpld_hotplug_device_destroy(priv->plat->psu + i); - - for (i = 0; i < priv->plat->pwr_count; i++) - mlxcpld_hotplug_device_destroy(priv->plat->pwr + i); - - for (i = 0; i < priv->plat->fan_count; i++) - mlxcpld_hotplug_device_destroy(priv->plat->fan + i); -} - -static irqreturn_t mlxcpld_hotplug_irq_handler(int irq, void *dev) -{ - struct mlxcpld_hotplug_priv_data *priv = - (struct mlxcpld_hotplug_priv_data *)dev; - - /* Schedule work task for immediate execution.*/ - schedule_delayed_work(&priv->dwork, 0); - - return IRQ_HANDLED; -} - -static int mlxcpld_hotplug_probe(struct platform_device *pdev) -{ - struct mlxcpld_hotplug_platform_data *pdata; - struct mlxcpld_hotplug_priv_data *priv; - int err; - - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - dev_err(&pdev->dev, "Failed to get platform data.\n"); - return -EINVAL; - } - - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->pdev = pdev; - priv->plat = pdata; - - priv->irq = platform_get_irq(pdev, 0); - if (priv->irq < 0) { - dev_err(&pdev->dev, "Failed to get platform irq: %d\n", - priv->irq); - return priv->irq; - } - - err = devm_request_irq(&pdev->dev, priv->irq, - mlxcpld_hotplug_irq_handler, 0, pdev->name, - priv); - if (err) { - dev_err(&pdev->dev, "Failed to request irq: %d\n", err); - return err; - } - disable_irq(priv->irq); - - INIT_DELAYED_WORK(&priv->dwork, mlxcpld_hotplug_work_handler); - spin_lock_init(&priv->lock); - - err = mlxcpld_hotplug_attr_init(priv); - if (err) { - dev_err(&pdev->dev, "Failed to allocate attributes: %d\n", err); - return err; - } - - priv->hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, - "mlxcpld_hotplug", priv, priv->groups); - if (IS_ERR(priv->hwmon)) { - dev_err(&pdev->dev, "Failed to register hwmon device %ld\n", - PTR_ERR(priv->hwmon)); - return PTR_ERR(priv->hwmon); - } - - platform_set_drvdata(pdev, priv); - - /* Perform initial interrupts setup. */ - mlxcpld_hotplug_set_irq(priv); - - return 0; -} - -static int mlxcpld_hotplug_remove(struct platform_device *pdev) -{ - struct mlxcpld_hotplug_priv_data *priv = platform_get_drvdata(pdev); - - /* Clean interrupts setup. */ - mlxcpld_hotplug_unset_irq(priv); - - return 0; -} - -static struct platform_driver mlxcpld_hotplug_driver = { - .driver = { - .name = "mlxcpld-hotplug", - }, - .probe = mlxcpld_hotplug_probe, - .remove = mlxcpld_hotplug_remove, -}; - -module_platform_driver(mlxcpld_hotplug_driver); - -MODULE_AUTHOR("Vadim Pasternak <[email protected]>"); -MODULE_DESCRIPTION("Mellanox CPLD hotplug platform driver"); -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_ALIAS("platform:mlxcpld-hotplug"); diff --git a/include/linux/platform_data/mlxcpld-hotplug.h b/include/linux/platform_data/mlxcpld-hotplug.h deleted file mode 100644 index e4cfcff..0000000 --- a/include/linux/platform_data/mlxcpld-hotplug.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * include/linux/platform_data/mlxcpld-hotplug.h - * Copyright (c) 2016 Mellanox Technologies. All rights reserved. - * Copyright (c) 2016 Vadim Pasternak <[email protected]> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the names of the copyright holders nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H -#define __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H - -/** - * struct mlxcpld_hotplug_device - I2C device data: - * @adapter: I2C device adapter; - * @client: I2C device client; - * @brdinfo: device board information; - * @bus: I2C bus, where device is attached; - * - * Structure represents I2C hotplug device static data (board topology) and - * dynamic data (related kernel objects handles). - */ -struct mlxcpld_hotplug_device { - struct i2c_adapter *adapter; - struct i2c_client *client; - struct i2c_board_info brdinfo; - u16 bus; -}; - -/** - * struct mlxcpld_hotplug_platform_data - device platform data: - * @top_aggr_offset: offset of top aggregation interrupt register; - * @top_aggr_mask: top aggregation interrupt common mask; - * @top_aggr_psu_mask: top aggregation interrupt PSU mask; - * @psu_reg_offset: offset of PSU interrupt register; - * @psu_mask: PSU interrupt mask; - * @psu_count: number of equipped replaceable PSUs; - * @psu: pointer to PSU devices data array; - * @top_aggr_pwr_mask: top aggregation interrupt power mask; - * @pwr_reg_offset: offset of power interrupt register - * @pwr_mask: power interrupt mask; - * @pwr_count: number of power sources; - * @pwr: pointer to power devices data array; - * @top_aggr_fan_mask: top aggregation interrupt FAN mask; - * @fan_reg_offset: offset of FAN interrupt register; - * @fan_mask: FAN interrupt mask; - * @fan_count: number of equipped replaceable FANs; - * @fan: pointer to FAN devices data array; - * - * Structure represents board platform data, related to system hotplug events, - * like FAN, PSU, power cable insertion and removing. This data provides the - * number of hot-pluggable devices and hardware description for event handling. - */ -struct mlxcpld_hotplug_platform_data { - u16 top_aggr_offset; - u8 top_aggr_mask; - u8 top_aggr_psu_mask; - u16 psu_reg_offset; - u8 psu_mask; - u8 psu_count; - struct mlxcpld_hotplug_device *psu; - u8 top_aggr_pwr_mask; - u16 pwr_reg_offset; - u8 pwr_mask; - u8 pwr_count; - struct mlxcpld_hotplug_device *pwr; - u8 top_aggr_fan_mask; - u16 fan_reg_offset; - u8 fan_mask; - u8 fan_count; - struct mlxcpld_hotplug_device *fan; -}; - -#endif /* __LINUX_PLATFORM_DATA_MLXCPLD_HOTPLUG_H */ -- 2.1.4
