Add nodes of thermal monitor and thermal zone for UniPhier PXs2 SoC.
The thermal monitor is included in sysctrl.
Furthermore, add cpuN labels for reference in cooling-device property.

Signed-off-by: Kunihiko Hayashi <hayashi.kunih...@socionext.com>
---
 arch/arm/boot/dts/uniphier-pxs2.dtsi | 43 ++++++++++++++++++++++++++++++++----
 1 file changed, 39 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi 
b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 90b020c..c89e0d5 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -16,7 +16,7 @@
                #address-cells = <1>;
                #size-cells = <0>;
 
-               cpu@0 {
+               cpu0: cpu@0 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <0>;
@@ -24,9 +24,10 @@
                        enable-method = "psci";
                        next-level-cache = <&l2>;
                        operating-points-v2 = <&cpu_opp>;
+                       #cooling-cells = <2>;
                };
 
-               cpu@1 {
+               cpu1: cpu@1 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <1>;
@@ -36,7 +37,7 @@
                        operating-points-v2 = <&cpu_opp>;
                };
 
-               cpu@2 {
+               cpu2: cpu@2 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <2>;
@@ -46,7 +47,7 @@
                        operating-points-v2 = <&cpu_opp>;
                };
 
-               cpu@3 {
+               cpu3: cpu@3 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a9";
                        reg = <3>;
@@ -114,6 +115,34 @@
                };
        };
 
+       thermal-zones {
+               cpu_thermal {
+                       polling-delay-passive = <250>;  /* 250ms */
+                       polling-delay = <1000>;         /* 1000ms */
+                       thermal-sensors = <&pvtctl>;
+
+                       trips {
+                               cpu_crit: cpu_crit {
+                                       temperature = <95000>;  /* 95C */
+                                       hysteresis = <2000>;
+                                       type = "critical";
+                               };
+                               cpu_alert: cpu_alert {
+                                       temperature = <85000>;  /* 85C */
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+                       };
+
+                       cooling-maps {
+                               map {
+                                       trip = <&cpu_alert>;
+                                       cooling-device = <&cpu0 (-1) (-1)>;
+                               };
+                       };
+               };
+       };
+
        soc {
                compatible = "simple-bus";
                #address-cells = <1>;
@@ -358,6 +387,12 @@
                                compatible = "socionext,uniphier-pxs2-reset";
                                #reset-cells = <1>;
                        };
+
+                       pvtctl: pvtctl {
+                               compatible = "socionext,uniphier-pxs2-thermal";
+                               interrupts = <0 3 4>;
+                               #thermal-sensor-cells = <0>;
+                       };
                };
 
                nand: nand@68000000 {
-- 
2.7.4

Reply via email to