From: Nicolas Ferre <[email protected]> The USB host has 3 ports so we must specify the entries for each in the atmel,vbus-gpio property. The specified pin (PA27) is the vbus for USBB and not USBA.
Signed-off-by: Nicolas Ferre <[email protected]> [[email protected]: change subject to match the desired prefix] Signed-off-by: Claudiu Beznea <[email protected]> --- arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index be5cd913f274..60cb084a8d92 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -67,7 +67,10 @@ usb1: ohci@00400000 { num-ports = <3>; - atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; + atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */ + &pioA PIN_PA27 GPIO_ACTIVE_HIGH + 0 + >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; -- 2.7.4
