From: Srinivas Kandagatla <[email protected]> This patch marks gsbi i2c node at soc level dtsi, so that kernel would not assume that its enabled and result in pin conflicts on some boards like IFC6410 which do use these pins for uart.
Without this patch we see below pin conflict: apq8064-pinctrl 800000.pinctrl: pin GPIO_16 already requested by 16540000.serial; cannot claim for 16580000.i2c apq8064-pinctrl 800000.pinctrl: pin-16 (16580000.i2c) status -22 apq8064-pinctrl 800000.pinctrl: could not request pin 16 (GPIO_16) from group gpio16 on device 800000.pinctrl i2c_qup 16580000.i2c: Error applying setting, reverse things back i2c_qup: probe of 16580000.i2c failed with error -22 Signed-off-by: Srinivas Kandagatla <[email protected]> --- arch/arm/boot/dts/qcom-apq8064.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index f3db185a6809..f0438bc671f7 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -590,6 +590,7 @@ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; + status = "disabled"; }; }; -- 2.11.0
