This patch updates pio, usb and crypto nodes to make them be consistent
with the binding documents.
Signed-off-by: Ryder Lee <ryder....@mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 52 ++++++++++++++++++++++---------------------
1 file changed, 27 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 381843e..9ec3767 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -226,21 +226,6 @@
#reset-cells = <1>;
};
- pio: pinctrl@10005000 {
- compatible = "mediatek,mt7623-pinctrl",
- "mediatek,mt2701-pinctrl";
- reg = <0 0x1000b000 0 0x1000>;
- mediatek,pctl-regmap = <&syscfg_pctl_a>;
- pins-are-numbered;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- interrupt-parent = <&gic>;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- };
-
syscfg_pctl_a: syscfg@10005000 {
compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
reg = <0 0x10005000 0 0x1000>;
@@ -274,6 +259,20 @@
clock-names = "system-clk", "rtc-clk";
};
+ pio: pinctrl@1000b000 {
+ compatible = "mediatek,mt7623-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl_a>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
pwrap: pwrap@1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
@@ -680,7 +679,7 @@
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
status = "disabled";
@@ -690,8 +689,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a1c4000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -699,12 +696,16 @@
u2port0: usb-phy@1a1c4800 {
reg = <0 0x1a1c4800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port0: usb-phy@1a1c4900 {
reg = <0 0x1a1c4900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -719,7 +720,7 @@
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
<&topckgen CLK_TOP_ETHIF_SEL>;
- clock-names = "sys_ck", "free_ck";
+ clock-names = "sys_ck", "ref_ck";
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
status = "disabled";
@@ -729,8 +730,6 @@
compatible = "mediatek,mt7623-u3phy",
"mediatek,mt2701-u3phy";
reg = <0 0x1a244000 0 0x0700>;
- clocks = <&clk26m>;
- clock-names = "u3phya_ref";
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -738,12 +737,16 @@
u2port1: usb-phy@1a244800 {
reg = <0 0x1a244800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port1: usb-phy@1a244900 {
reg = <0 0x1a244900 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
@@ -784,16 +787,15 @@
};
crypto: crypto@1b240000 {
- compatible = "mediatek,mt7623-crypto";
+ compatible = "mediatek,eip97-crypto";
reg = <0 0x1b240000 0 0x20000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
- <ðsys CLK_ETHSYS_CRYPTO>;
- clock-names = "ethif","cryp";
+ clocks = <ðsys CLK_ETHSYS_CRYPTO>;
+ clock-names = "cryp";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
status = "disabled";
};
--
1.9.1
