On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote: > We try to keep the nodes in address order. The ADC node was out of > place. > > Signed-off-by: Joel Stanley <[email protected]> > --- > arch/arm/boot/dts/aspeed-g4.dtsi | 16 ++++++++-------- > arch/arm/boot/dts/aspeed-g5.dtsi | 16 ++++++++-------- > 2 files changed, 16 insertions(+), 16 deletions(-) > > diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi > b/arch/arm/boot/dts/aspeed-g4.dtsi > index 1edd0cee6221..a4579498fc25 100644 > --- a/arch/arm/boot/dts/aspeed-g4.dtsi > +++ b/arch/arm/boot/dts/aspeed-g4.dtsi > @@ -129,6 +129,14 @@ > }; > }; > > + adc: adc@1e6e9000 { > + compatible = "aspeed,ast2400-adc"; > + reg = <0x1e6e9000 0xb0>; > + clocks = <&syscon ASPEED_CLK_APB>;
We can't do this yet as the clk driver isn't yet merged, and it breaks from the
"just move the node" description in the commit message.
> + #io-channel-cells = <1>;
> + status = "disabled";
> + };
> +
> sram@1e720000 {
> compatible = "mmio-sram";
> reg = <0x1e720000 0x8000>; // 32K
> @@ -227,14 +235,6 @@
> no-loopback-test;
> status = "disabled";
> };
> -
> - adc: adc@1e6e9000 {
> - compatible = "aspeed,ast2400-adc";
> - reg = <0x1e6e9000 0xb0>;
> - clocks = <&clk_apb>;
> - #io-channel-cells = <1>;
> - status = "disabled";
> - };
> };
> };
> };
> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi
> b/arch/arm/boot/dts/aspeed-g5.dtsi
> index f56dd67efa50..f6430b313f90 100644
> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
> @@ -173,6 +173,14 @@
> reg-io-width = <4>;
> };
>
> + adc: adc@1e6e9000 {
> + compatible = "aspeed,ast2500-adc";
> + reg = <0x1e6e9000 0xb0>;
Did you intend to change the size cell value here? It now matches the g4, but
there was an explicit comment about the size for some reason in the -hunk
below. It's probably worth an explicit call-out if we're going to change it.
> + clocks = <&syscon ASPEED_CLK_APB>;
See the clk comment on the g4 diff.
Cheers,
Andrew
> + #io-channel-cells = <1>;
> + status = "disabled";
> + };
> +
> sram@1e720000 {
> compatible = "mmio-sram";
> reg = <0x1e720000 0x9000>; // 36K
> @@ -307,14 +315,6 @@
> no-loopback-test;
> status = "disabled";
> };
> -
> - adc: adc@1e6e9000 {
> - compatible = "aspeed,ast2500-adc";
> - reg = <0x1e6e9000 0xb0>;
> - clocks = <&clk_apb>;
> - #io-channel-cells = <1>;
> - status = "disabled";
> - };
> };
> };
> };
signature.asc
Description: This is a digitally signed message part
