On 17/10/2017 09:38, Neil Armstrong wrote:
> Signed-off-by: Neil Armstrong <[email protected]>
> ---
> .../bindings/power/amlogic,meson-gx-pwrc.txt | 65
> ++++++++++++++++++++++
> 1 file changed, 65 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
>
> diff --git
> a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
> b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
> new file mode 100644
> index 0000000..94c2474
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
> @@ -0,0 +1,65 @@
> +Amlogic Meson Power Controller
> +==============================
> +
> +The Amlogic Meson SoCs embeds an internal Power domain controller.
> +
> +VPU Power Domain
> +----------------
> +
> +The Video Processing Unit power domain is controlled by this power
> controller,
> +but the domain requires some external resources to meet the correct power
> +sequences.
> +The bindings must respect the power domain bindings as described in the file
> +power_domain.txt
> +
> +Device Tree Bindings:
> +---------------------
> +
> +Required properties:
> +- compatible: value should be different for each SoC family as :
> + - GXBB (S905) : "amlogic,meson-gxbb-vpu"
> + - GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
> + - GXM (S912) : "amlogic,meson-gxm-vpu"
> + followed by the common "amlogic,meson-gx-vpu"
Oops, wrong compatibles, please ignore this patch, I'll repost it.
> +- #power-domain-cells: should be 0
> +- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
> +- resets: phandles to the reset lines needed for this power demain sequence
> + as described in ../reset/reset.txt
> +- clocks: from common clock binding: handle to VPU and VAPB clocks
> +- clock-names: from common clock binding: must contain "vpu", "vapb"
> + corresponding to entry in the clocks property.
> +
> +Parent node should have the following properties :
> +- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
> +- reg: base address and size of the AO system control register space.
> +
> +Example:
> +-------
> +
> +ao_sysctrl: sys-ctrl@0 {
> + compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
> + reg = <0x0 0x0 0x0 0x100>;
> +
> + pwrc_vpu: power-controller-vpu {
> + compatible = "amlogic,meson-gx-pwrc-vpu";
> + #power-domain-cells = <0>;
> + amlogic,hhi-sysctrl = <&sysctrl>;
> + resets = <&reset RESET_VIU>,
> + <&reset RESET_VENC>,
> + <&reset RESET_VCBUS>,
> + <&reset RESET_BT656>,
> + <&reset RESET_DVIN_RESET>,
> + <&reset RESET_RDMA>,
> + <&reset RESET_VENCI>,
> + <&reset RESET_VENCP>,
> + <&reset RESET_VDAC>,
> + <&reset RESET_VDI6>,
> + <&reset RESET_VENCL>,
> + <&reset RESET_VID_LOCK>;
> + clocks = <&clkc CLKID_VPU>,
> + <&clkc CLKID_VAPB>;
> + clock-names = "vpu", "vapb";
> + };
> +};
> +
> +
>
