[PATCH v2 6/8] ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file

[Chen-Yu Tsai]

mmc1 only has 1 possible pinmux setting.

Move any settings to the dtsi file and set it by default.

Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 2 --
 arch/arm/boot/dts/sun8i-a83t.dtsi         | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts 
b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 723641f56a74..de0be140338b 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -115,8 +115,6 @@
 &mmc1 {
        mmc-pwrseq = <&wifi_pwrseq>;
        bus-width = <4>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc1_pins>;
        vmmc-supply = <&reg_vcc3v3>;
        vqmmc-supply = <&reg_vcc3v3>;
        non-removable;
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi 
b/arch/arm/boot/dts/sun8i-a83t.dtsi
index ce6e887c8938..19acae1b4089 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -212,6 +212,8 @@
                        resets = <&ccu RST_BUS_MMC1>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc1_pins>;
                        status = "disabled";
                        #address-cells = <1>;
                        #size-cells = <0>;
-- 
2.14.2