Hi! > > I got "uncompressing Linux 4.13" on serial console now, debug LEDs > > blinking, and if I use a flashlight, I see output on the screen, too. > > > > (What do I need to do to get the backlight working?) > > Glad you got it working :) For backlight you can add this > in drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c: > > add the following code at the end of dsicm_probe: > > ----------------------------------------------------------- > mutex_unlock(&ddata->lock); > mutex_lock(&ddata->lock); > ddata->in->ops.dsi->bus_lock(ddata->in); > r = dsicm_wake_up(ddata); > if (!r) > r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 100); > ddata->in->ops.dsi->bus_unlock(ddata->in); > mutex_unlock(&ddata->lock); > -----------------------------------------------------------
Ok, I tried that, and did not help. I also tried removing first
mutex_unlock(), since that's unbalanced and strange. Did not work. So
I commented it out with #if 0, and tried more hacks, but no luck :-(.
(I still see the display.. but no backlight so reading it is
.. difficult.)
Best regards,
Pavel
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index 8f74633..c0bbb42 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -668,6 +668,7 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
goto err;
r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 0xff);
+ mdelay(1000);
if (r)
goto err;
@@ -703,6 +704,8 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
in->ops.dsi->enable_hs(in, ddata->channel, true);
+ r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 0xff);
+
return 0;
err:
dev_err(&ddata->pdev->dev, "error while enabling panel, issuing HW
reset\n");
@@ -1396,6 +1399,15 @@ static int dsicm_probe(struct platform_device *pdev)
goto err_bl;
}
+#if 0
+ mutex_lock(&ddata->lock);
+ ddata->in->ops.dsi->bus_lock(ddata->in);
+ r = dsicm_wake_up(ddata);
+ if (!r)
+ r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 100);
+ ddata->in->ops.dsi->bus_unlock(ddata->in);
+ mutex_unlock(&ddata->lock);
+#endif
return 0;
err_bl:
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
signature.asc
Description: Digital signature
