Common power driver for PDAs and phones with one or two external
power supplies (AC/USB) connected to main and backup batteries,
and optional builtin charger.
It's used to stop logic duplication through different embedded
devices. So, power supply *logic* is here. pda_power register
power supplies, and will take care about notifying batteries
about power changes through external power interface.
AC/USB power consumption issues should be handled by platform
code, inside set_charge function.
Signed-off-by: Roman Moravcik <[EMAIL PROTECTED]>
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
drivers/power/Kconfig | 7 ++
drivers/power/Makefile | 2 +
drivers/power/pda_power.c | 256 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/pda_power.h | 28 +++++
4 files changed, 293 insertions(+), 0 deletions(-)
create mode 100644 drivers/power/pda_power.c
create mode 100644 include/linux/pda_power.h
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 7811fa6..cc70644 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -14,4 +14,11 @@ config POWER_SUPPLY_DEBUG
Say Y here to enable debugging messages for power supply class
and drivers.
+config PDA_POWER
+ tristate "Generic PDA/phone power driver"
+ help
+ Say Y here to enable generic power driver for PDAs and phones with
+ one or two external power supplies (AC/USB) connected to main and
+ backup batteries, and optional builtin charger.
+
endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 95085ba..1808b69 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -13,3 +13,5 @@ EXTRA_CFLAGS += -DDEBUG
endif
obj-$(CONFIG_POWER_SUPPLY) += power_supply.o
+
+obj-$(CONFIG_PDA_POWER) += pda_power.o
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
new file mode 100644
index 0000000..a36936e
--- /dev/null
+++ b/drivers/power/pda_power.c
@@ -0,0 +1,256 @@
+/*
+ * Common power driver for PDAs and phones with one or two external
+ * power supplies (AC/USB) connected to main and backup batteries,
+ * and optional builtin charger.
+ *
+ * Copyright 2007 Anton Vorontsov <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/power_supply.h>
+#include <linux/pda_power.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+
+static inline unsigned int get_irq_flags(struct resource *res)
+{
+ unsigned int flags = IRQF_DISABLED | IRQF_SHARED;
+
+ flags |= res->flags & IRQF_TRIGGER_MASK;
+
+ return flags;
+}
+
+static struct device *dev;
+static struct pda_power_pdata *pdata;
+static struct resource *ac_irq, *usb_irq;
+static struct timer_list charger_timer;
+static struct timer_list supply_timer;
+
+static int pda_power_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (psy->type == POWER_SUPPLY_TYPE_AC)
+ val->intval = pdata->is_ac_online ?
+ pdata->is_ac_online() : 0;
+ else
+ val->intval = pdata->is_usb_online ?
+ pdata->is_usb_online() : 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static enum power_supply_property pda_power_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static char *pda_power_supplied_to[] = {
+ "main-battery",
+ "backup-battery",
+};
+
+static struct power_supply pda_power_supplies[] = {
+ {
+ .name = "ac",
+ .type = POWER_SUPPLY_TYPE_AC,
+ .supplied_to = pda_power_supplied_to,
+ .num_supplicants = ARRAY_SIZE(pda_power_supplied_to),
+ .properties = pda_power_props,
+ .num_properties = ARRAY_SIZE(pda_power_props),
+ .get_property = pda_power_get_property,
+ },
+ {
+ .name = "usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .supplied_to = pda_power_supplied_to,
+ .num_supplicants = ARRAY_SIZE(pda_power_supplied_to),
+ .properties = pda_power_props,
+ .num_properties = ARRAY_SIZE(pda_power_props),
+ .get_property = pda_power_get_property,
+ },
+};
+
+static void update_charger(void)
+{
+ if (!pdata->set_charge)
+ return;
+
+ if (pdata->is_ac_online && pdata->is_ac_online()) {
+ dev_dbg(dev, "charger on (AC)\n");
+ pdata->set_charge(PDA_POWER_CHARGE_AC);
+ }
+ else if (pdata->is_usb_online && pdata->is_usb_online()) {
+ dev_dbg(dev, "charger on (USB)\n");
+ pdata->set_charge(PDA_POWER_CHARGE_USB);
+ }
+ else {
+ dev_dbg(dev, "charger off\n");
+ pdata->set_charge(0);
+ }
+
+ return;
+}
+
+static void supply_timer_func(unsigned long irq)
+{
+ if (ac_irq && irq == ac_irq->start)
+ power_supply_changed(&pda_power_supplies[0]);
+ else if (usb_irq && irq == usb_irq->start)
+ power_supply_changed(&pda_power_supplies[1]);
+ return;
+}
+
+static void charger_timer_func(unsigned long irq)
+{
+ update_charger();
+
+ /* Okay, charger set. Now wait a bit before notifying supplicants,
+ * charge power should stabilize. */
+ supply_timer.data = irq;
+ mod_timer(&supply_timer,
+ jiffies + msecs_to_jiffies(pdata->wait_for_charger));
+ return;
+}
+
+static irqreturn_t power_changed_isr(int irq, void *unused)
+{
+ /* Wait a bit before reading ac/usb line status and setting charger,
+ * because ac/usb status readings may lag from irq. */
+ charger_timer.data = irq;
+ mod_timer(&charger_timer,
+ jiffies + msecs_to_jiffies(pdata->wait_for_status));
+ return IRQ_HANDLED;
+}
+
+static int pda_power_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ dev = &pdev->dev;
+
+ if (pdev->id != -1) {
+ dev_err(dev, "it's meaningless to register several "
+ "pda_powers, use id = -1\n");
+ ret = -EINVAL;
+ goto wrongid;
+ }
+
+ pdata = pdev->dev.platform_data;
+
+ update_charger();
+
+ if (!pdata->wait_for_status)
+ pdata->wait_for_status = 500;
+
+ if (!pdata->wait_for_charger)
+ pdata->wait_for_charger = 500;
+
+ setup_timer(&charger_timer, charger_timer_func, 0);
+ setup_timer(&supply_timer, supply_timer_func, 0);
+
+ ac_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ac");
+ usb_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "usb");
+ if (!ac_irq && !usb_irq) {
+ dev_err(dev, "no ac/usb irq specified\n");
+ ret = -ENODEV;
+ goto noirqs;
+ }
+
+ ret = power_supply_register(&pdev->dev, &pda_power_supplies[0]);
+ if (ret) {
+ dev_err(dev, "failed to register %s power supply\n",
+ pda_power_supplies[0].name);
+ goto supply0_failed;
+ }
+
+ ret = power_supply_register(&pdev->dev, &pda_power_supplies[1]);
+ if (ret) {
+ dev_err(dev, "failed to register %s power supply\n",
+ pda_power_supplies[1].name);
+ goto supply1_failed;
+ }
+
+ if (ac_irq) {
+ ret = request_irq(ac_irq->start, power_changed_isr,
+ get_irq_flags(ac_irq), ac_irq->name,
+ &pda_power_supplies[0]);
+ if (ret) {
+ dev_err(dev, "request ac irq failed\n");
+ goto ac_irq_failed;
+ }
+ }
+
+ if (usb_irq) {
+ ret = request_irq(usb_irq->start, power_changed_isr,
+ get_irq_flags(usb_irq), usb_irq->name,
+ &pda_power_supplies[1]);
+ if (ret) {
+ dev_err(dev, "request usb irq failed\n");
+ goto usb_irq_failed;
+ }
+ }
+
+ goto success;
+
+usb_irq_failed:
+ if (ac_irq)
+ free_irq(ac_irq->start, &pda_power_supplies[0]);
+ac_irq_failed:
+ power_supply_unregister(&pda_power_supplies[1]);
+supply1_failed:
+ power_supply_unregister(&pda_power_supplies[0]);
+supply0_failed:
+noirqs:
+wrongid:
+success:
+ return ret;
+}
+
+static int pda_power_remove(struct platform_device *pdev)
+{
+ if (usb_irq)
+ free_irq(usb_irq->start, &pda_power_supplies[1]);
+ if (ac_irq)
+ free_irq(ac_irq->start, &pda_power_supplies[0]);
+ del_timer_sync(&charger_timer);
+ del_timer_sync(&supply_timer);
+ power_supply_unregister(&pda_power_supplies[1]);
+ power_supply_unregister(&pda_power_supplies[0]);
+ return 0;
+}
+
+static struct platform_driver pda_power_pdrv = {
+ .driver = {
+ .name = "pda-power",
+ },
+ .probe = pda_power_probe,
+ .remove = pda_power_remove,
+};
+
+static int __init pda_power_init(void)
+{
+ return platform_driver_register(&pda_power_pdrv);
+}
+
+static void __exit pda_power_exit(void)
+{
+ platform_driver_unregister(&pda_power_pdrv);
+ return;
+}
+
+module_init(pda_power_init);
+module_exit(pda_power_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anton Vorontsov <[EMAIL PROTECTED]>");
diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h
new file mode 100644
index 0000000..77e673c
--- /dev/null
+++ b/include/linux/pda_power.h
@@ -0,0 +1,28 @@
+/*
+ * Common power driver for PDAs and phones with one or two external
+ * power supplies (AC/USB) connected to main and backup batteries,
+ * and optional builtin charger.
+ *
+ * Copyright 2007 Anton Vorontsov <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PDA_POWER_H__
+#define __PDA_POWER_H__
+
+#define PDA_POWER_CHARGE_AC (1 << 0)
+#define PDA_POWER_CHARGE_USB (1 << 1)
+
+struct pda_power_pdata {
+ int (*is_ac_online)(void);
+ int (*is_usb_online)(void);
+ void (*set_charge)(int flags);
+
+ unsigned int wait_for_status; /* msecs, default is 500 */
+ unsigned int wait_for_charger; /* msecs, default is 500 */
+};
+
+#endif /* __PDA_POWER_H__ */
--
1.5.1.1-dirty
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
