On Mon, 2017-10-30 at 15:24 -0700, Hoan Tran wrote:
> This patch supports xgene-slimpro-i2c v2 which uses the non-cachable
> memory
> as the PCC shared memory.
> 

Reviewed-by: Andy Shevchenko <[email protected]>

(I'm totally fine with ACPI bits here, for the rest I hope it had been
tested and works as expected)

> Signed-off-by: Hoan Tran <[email protected]>
> ---
> v2:
>  - Remove un-necessary ifdef CONFIG_ACPI
>  - Use acpi_match_table pointer from pdev
>  - Use MEMREMAP_WT for non-cachable memory
> 
>  drivers/i2c/busses/i2c-xgene-slimpro.c | 30
> ++++++++++++++++++++++++++----
>  1 file changed, 26 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c
> b/drivers/i2c/busses/i2c-xgene-slimpro.c
> index 7e89ba6..a7ac746 100644
> --- a/drivers/i2c/busses/i2c-xgene-slimpro.c
> +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
> @@ -129,6 +129,11 @@ struct slimpro_i2c_dev {
>  #define to_slimpro_i2c_dev(cl)       \
>               container_of(cl, struct slimpro_i2c_dev, mbox_client)
>  
> +enum slimpro_i2c_version {
> +     XGENE_SLIMPRO_I2C_V1 = 0,
> +     XGENE_SLIMPRO_I2C_V2 = 1,
> +};
> +
>  /*
>   * This function tests and clears a bitmask then returns its old
> value
>   */
> @@ -476,6 +481,15 @@ static int xgene_slimpro_i2c_probe(struct
> platform_device *pdev)
>               }
>       } else {
>               struct acpi_pcct_hw_reduced *cppc_ss;
> +             const struct acpi_device_id *acpi_id;
> +             int version = XGENE_SLIMPRO_I2C_V1;
> +
> +             acpi_id = acpi_match_device(pdev->dev.driver-
> >acpi_match_table,
> +                                         &pdev->dev);
> +             if (!acpi_id)
> +                     return -EINVAL;
> +
> +             version = (int)acpi_id->driver_data;
>  
>               if (device_property_read_u32(&pdev->dev, "pcc-
> channel",
>                                            &ctx->mbox_idx))
> @@ -514,9 +528,16 @@ static int xgene_slimpro_i2c_probe(struct
> platform_device *pdev)
>                */
>               ctx->comm_base_addr = cppc_ss->base_address;
>               if (ctx->comm_base_addr) {
> -                     ctx->pcc_comm_addr = memremap(ctx-
> >comm_base_addr,
> -                                                   cppc_ss-
> >length,
> -                                                   MEMREMAP_WB);
> +                     if (version == XGENE_SLIMPRO_I2C_V2)
> +                             ctx->pcc_comm_addr = memremap(
> +                                                     ctx-
> >comm_base_addr,
> +                                                     cppc_ss-
> >length,
> +                                                     MEMREMAP_WT);
> +                     else
> +                             ctx->pcc_comm_addr = memremap(
> +                                                     ctx-
> >comm_base_addr,
> +                                                     cppc_ss-
> >length,
> +                                                     MEMREMAP_WB);
>               } else {
>                       dev_err(&pdev->dev, "Failed to get PCC comm
> region\n");
>                       rc = -ENOENT;
> @@ -581,7 +602,8 @@ MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids);
>  
>  #ifdef CONFIG_ACPI
>  static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = {
> -     {"APMC0D40", 0},
> +     {"APMC0D40", XGENE_SLIMPRO_I2C_V1},
> +     {"APMC0D8B", XGENE_SLIMPRO_I2C_V2},
>       {}
>  };
>  MODULE_DEVICE_TABLE(acpi, xgene_slimpro_i2c_acpi_ids);

-- 
Andy Shevchenko <[email protected]>
Intel Finland Oy

Reply via email to