move the driver from drivers/soc/fsl/qe to drivers/irqchip,
merge qe_ic.h and qe_ic.c into irq-qeic.c.
Signed-off-by: Zhao Qiang <qiang.z...@nxp.com>
---
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-qeic.c | 601 ++++++++++++++++++++++++++++++++++++++++++++
drivers/soc/fsl/qe/Makefile | 2 +-
drivers/soc/fsl/qe/qe_ic.c | 512 -------------------------------------
drivers/soc/fsl/qe/qe_ic.h | 103 --------
5 files changed, 603 insertions(+), 616 deletions(-)
create mode 100644 drivers/irqchip/irq-qeic.c
delete mode 100644 drivers/soc/fsl/qe/qe_ic.c
delete mode 100644 drivers/soc/fsl/qe/qe_ic.h
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 0e55d94..627c5d6 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -75,3 +75,4 @@ obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o
obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o
+obj-$(CONFIG_QUICC_ENGINE) += irq-qeic.o
diff --git a/drivers/irqchip/irq-qeic.c b/drivers/irqchip/irq-qeic.c
new file mode 100644
index 0000000..48ceded
--- /dev/null
+++ b/drivers/irqchip/irq-qeic.c
@@ -0,0 +1,601 @@
+/*
+ * drivers/irqchip/irq-qeic.c
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <le...@freescale.com>
+ * Based on code from Shlomi Gridish <grid...@freescale.com>
+ *
+ * QUICC ENGINE Interrupt Controller
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <soc/fsl/qe/qe_ic.h>
+
+#define NR_QE_IC_INTS 64
+
+/* QE IC registers offset */
+#define QEIC_CICR 0x00
+#define QEIC_CIVEC 0x04
+#define QEIC_CRIPNR 0x08
+#define QEIC_CIPNR 0x0c
+#define QEIC_CIPXCC 0x10
+#define QEIC_CIPYCC 0x14
+#define QEIC_CIPWCC 0x18
+#define QEIC_CIPZCC 0x1c
+#define QEIC_CIMR 0x20
+#define QEIC_CRIMR 0x24
+#define QEIC_CICNR 0x28
+#define QEIC_CIPRTA 0x30
+#define QEIC_CIPRTB 0x34
+#define QEIC_CRICR 0x3c
+#define QEIC_CHIVEC 0x60
+
+/* Interrupt priority registers */
+#define CIPCC_SHIFT_PRI0 29
+#define CIPCC_SHIFT_PRI1 26
+#define CIPCC_SHIFT_PRI2 23
+#define CIPCC_SHIFT_PRI3 20
+#define CIPCC_SHIFT_PRI4 13
+#define CIPCC_SHIFT_PRI5 10
+#define CIPCC_SHIFT_PRI6 7
+#define CIPCC_SHIFT_PRI7 4
+
+/* CICR priority modes */
+#define CICR_GWCC 0x00040000
+#define CICR_GXCC 0x00020000
+#define CICR_GYCC 0x00010000
+#define CICR_GZCC 0x00080000
+#define CICR_GRTA 0x00200000
+#define CICR_GRTB 0x00400000
+#define CICR_HPIT_SHIFT 8
+#define CICR_HPIT_MASK 0x00000300
+#define CICR_HP_SHIFT 24
+#define CICR_HP_MASK 0x3f000000
+
+/* CICNR */
+#define CICNR_WCC1T_SHIFT 20
+#define CICNR_ZCC1T_SHIFT 28
+#define CICNR_YCC1T_SHIFT 12
+#define CICNR_XCC1T_SHIFT 4
+
+/* CRICR */
+#define CRICR_RTA1T_SHIFT 20
+#define CRICR_RTB1T_SHIFT 28
+
+/* Signal indicator */
+#define SIGNAL_MASK 3
+#define SIGNAL_HIGH 2
+#define SIGNAL_LOW 0
+
+struct qe_ic {
+ /* Control registers offset */
+ volatile u32 __iomem *regs;
+
+ /* The remapper for this QEIC */
+ struct irq_domain *irqhost;
+
+ /* The "linux" controller struct */
+ struct irq_chip hc_irq;
+
+ /* VIRQ numbers of QE high/low irqs */
+ unsigned int virq_high;
+ unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+ /* location of this source at the QIMR register. */
+ u32 mask;
+
+ /* Mask register offset */
+ u32 mask_reg;
+
+ /*
+ * for grouped interrupts sources - the interrupt
+ * code as appears at the group priority register
+ */
+ u8 pri_code;
+
+ /* Group priority register offset */
+ u32 pri_reg;
+};
+
+static DEFINE_RAW_SPINLOCK(qe_ic_lock);
+
+static struct qe_ic_info qe_ic_info[] = {
+ [1] = {
+ .mask = 0x00008000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [2] = {
+ .mask = 0x00004000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [3] = {
+ .mask = 0x00002000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPWCC,
+ },
+ [10] = {
+ .mask = 0x00000040,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [11] = {
+ .mask = 0x00000020,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [12] = {
+ .mask = 0x00000010,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [13] = {
+ .mask = 0x00000008,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [14] = {
+ .mask = 0x00000004,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 5,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [15] = {
+ .mask = 0x00000002,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 6,
+ .pri_reg = QEIC_CIPZCC,
+ },
+ [20] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTA,
+ },
+ [25] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [26] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [27] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [28] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CRIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPRTB,
+ },
+ [32] = {
+ .mask = 0x80000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [33] = {
+ .mask = 0x40000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [34] = {
+ .mask = 0x20000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [35] = {
+ .mask = 0x10000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [36] = {
+ .mask = 0x08000000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 4,
+ .pri_reg = QEIC_CIPXCC,
+ },
+ [40] = {
+ .mask = 0x00800000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 0,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [41] = {
+ .mask = 0x00400000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 1,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [42] = {
+ .mask = 0x00200000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 2,
+ .pri_reg = QEIC_CIPYCC,
+ },
+ [43] = {
+ .mask = 0x00100000,
+ .mask_reg = QEIC_CIMR,
+ .pri_code = 3,
+ .pri_reg = QEIC_CIPYCC,
+ },
+};
+
+static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg)
+{
+ return in_be32(base + (reg >> 2));
+}
+
+static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int
reg,
+ u32 value)
+{
+ out_be32(base + (reg >> 2), value);
+}
+
+static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
+{
+ return irq_get_chip_data(virq);
+}
+
+static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
+{
+ return irq_data_get_irq_chip_data(d);
+}
+
+static void qe_ic_unmask_irq(struct irq_data *d)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
+ unsigned int src = irqd_to_hwirq(d);
+ unsigned long flags;
+ u32 temp;
+
+ raw_spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp | qe_ic_info[src].mask);
+
+ raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static void qe_ic_mask_irq(struct irq_data *d)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
+ unsigned int src = irqd_to_hwirq(d);
+ unsigned long flags;
+ u32 temp;
+
+ raw_spin_lock_irqsave(&qe_ic_lock, flags);
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
+ temp & ~qe_ic_info[src].mask);
+
+ /* Flush the above write before enabling interrupts; otherwise,
+ * spurious interrupts will sometimes happen. To be 100% sure
+ * that the write has reached the device before interrupts are
+ * enabled, the mask register would have to be read back; however,
+ * this is not required for correctness, only to avoid wasting
+ * time on a large number of spurious interrupts. In testing,
+ * a sync reduced the observed spurious interrupts to zero.
+ */
+ mb();
+
+ raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
+}
+
+static struct irq_chip qe_ic_irq_chip = {
+ .name = "QEIC",
+ .irq_unmask = qe_ic_unmask_irq,
+ .irq_mask = qe_ic_mask_irq,
+ .irq_mask_ack = qe_ic_mask_irq,
+};
+
+static int qe_ic_host_match(struct irq_domain *h, struct device_node *node,
+ enum irq_domain_bus_token bus_token)
+{
+ /* Exact match, unless qe_ic node is NULL */
+ struct device_node *of_node = irq_domain_get_of_node(h);
+ return of_node == NULL || of_node == node;
+}
+
+static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct qe_ic *qe_ic = h->host_data;
+ struct irq_chip *chip;
+
+ if (hw >= ARRAY_SIZE(qe_ic_info)) {
+ pr_err("%s: Invalid hw irq number for QEIC\n", __func__);
+ return -EINVAL;
+ }
+
+ if (qe_ic_info[hw].mask == 0) {
+ printk(KERN_ERR "Can't map reserved IRQ\n");
+ return -EINVAL;
+ }
+ /* Default chip */
+ chip = &qe_ic->hc_irq;
+
+ irq_set_chip_data(virq, qe_ic);
+ irq_set_status_flags(virq, IRQ_LEVEL);
+
+ irq_set_chip_and_handler(virq, chip, handle_level_irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops qe_ic_host_ops = {
+ .match = qe_ic_host_match,
+ .map = qe_ic_host_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
+{
+ int irq;
+
+ BUG_ON(qe_ic == NULL);
+
+ /* get the interrupt source vector. */
+ irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
+
+ if (irq == 0)
+ return NO_IRQ;
+
+ return irq_linear_revmap(qe_ic->irqhost, irq);
+}
+
+void __init qe_ic_init(struct device_node *node, unsigned int flags,
+ void (*low_handler)(struct irq_desc *desc),
+ void (*high_handler)(struct irq_desc *desc))
+{
+ struct qe_ic *qe_ic;
+ struct resource res;
+ u32 temp = 0, ret, high_active = 0;
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret)
+ return;
+
+ qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
+ if (qe_ic == NULL)
+ return;
+
+ qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
+ &qe_ic_host_ops, qe_ic);
+ if (qe_ic->irqhost == NULL) {
+ kfree(qe_ic);
+ return;
+ }
+
+ qe_ic->regs = ioremap(res.start, resource_size(&res));
+
+ qe_ic->hc_irq = qe_ic_irq_chip;
+
+ qe_ic->virq_high = irq_of_parse_and_map(node, 0);
+ qe_ic->virq_low = irq_of_parse_and_map(node, 1);
+
+ if (qe_ic->virq_low == NO_IRQ) {
+ printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+ kfree(qe_ic);
+ return;
+ }
+
+ /* default priority scheme is grouped. If spread mode is */
+ /* required, configure cicr accordingly. */
+ if (flags & QE_IC_SPREADMODE_GRP_W)
+ temp |= CICR_GWCC;
+ if (flags & QE_IC_SPREADMODE_GRP_X)
+ temp |= CICR_GXCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Y)
+ temp |= CICR_GYCC;
+ if (flags & QE_IC_SPREADMODE_GRP_Z)
+ temp |= CICR_GZCC;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCA)
+ temp |= CICR_GRTA;
+ if (flags & QE_IC_SPREADMODE_GRP_RISCB)
+ temp |= CICR_GRTB;
+
+ /* choose destination signal for highest priority interrupt */
+ if (flags & QE_IC_HIGH_SIGNAL) {
+ temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
+ high_active = 1;
+ }
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+
+ irq_set_handler_data(qe_ic->virq_low, qe_ic);
+ irq_set_chained_handler(qe_ic->virq_low, low_handler);
+
+ if (qe_ic->virq_high != NO_IRQ &&
+ qe_ic->virq_high != qe_ic->virq_low) {
+ irq_set_handler_data(qe_ic->virq_high, qe_ic);
+ irq_set_chained_handler(qe_ic->virq_high, high_handler);
+ }
+}
+
+void qe_ic_set_highest_priority(unsigned int virq, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp = 0;
+
+ temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
+
+ temp &= ~CICR_HP_MASK;
+ temp |= src << CICR_HP_SHIFT;
+
+ temp &= ~CICR_HPIT_MASK;
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
+
+ qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+}
+
+/* Set Priority level within its group, from 1 to 8 */
+int qe_ic_set_priority(unsigned int virq, unsigned int priority)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp;
+
+ if (priority > 8 || priority == 0)
+ return -EINVAL;
+ if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
+ "%s: Invalid hw irq number for QEIC\n", __func__))
+ return -EINVAL;
+ if (qe_ic_info[src].pri_reg == 0)
+ return -EINVAL;
+
+ temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
+
+ if (priority < 4) {
+ temp &= ~(0x7 << (32 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
+ } else {
+ temp &= ~(0x7 << (24 - priority * 3));
+ temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
+ }
+
+ qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
+
+ return 0;
+}
+
+/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
+{
+ struct qe_ic *qe_ic = qe_ic_from_irq(virq);
+ unsigned int src = virq_to_hw(virq);
+ u32 temp, control_reg = QEIC_CICNR, shift = 0;
+
+ if (priority > 2 || priority == 0)
+ return -EINVAL;
+ if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
+ "%s: Invalid hw irq number for QEIC\n", __func__))
+ return -EINVAL;
+
+ switch (qe_ic_info[src].pri_reg) {
+ case QEIC_CIPZCC:
+ shift = CICNR_ZCC1T_SHIFT;
+ break;
+ case QEIC_CIPWCC:
+ shift = CICNR_WCC1T_SHIFT;
+ break;
+ case QEIC_CIPYCC:
+ shift = CICNR_YCC1T_SHIFT;
+ break;
+ case QEIC_CIPXCC:
+ shift = CICNR_XCC1T_SHIFT;
+ break;
+ case QEIC_CIPRTA:
+ shift = CRICR_RTA1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ case QEIC_CIPRTB:
+ shift = CRICR_RTB1T_SHIFT;
+ control_reg = QEIC_CRICR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ shift += (2 - priority) * 2;
+ temp = qe_ic_read(qe_ic->regs, control_reg);
+ temp &= ~(SIGNAL_MASK << shift);
+ temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
+ qe_ic_write(qe_ic->regs, control_reg, temp);
+
+ return 0;
+}
+
+static struct bus_type qe_ic_subsys = {
+ .name = "qe_ic",
+ .dev_name = "qe_ic",
+};
+
+static struct device device_qe_ic = {
+ .id = 0,
+ .bus = &qe_ic_subsys,
+};
+
+static int __init init_qe_ic_sysfs(void)
+{
+ int rc;
+
+ printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
+
+ rc = subsys_system_register(&qe_ic_subsys, NULL);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys class\n");
+ return -ENODEV;
+ }
+ rc = device_register(&device_qe_ic);
+ if (rc) {
+ printk(KERN_ERR "Failed registering qe_ic sys device\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+subsys_initcall(init_qe_ic_sysfs);
diff --git a/drivers/soc/fsl/qe/Makefile b/drivers/soc/fsl/qe/Makefile
index 2031d38..51e4726 100644
--- a/drivers/soc/fsl/qe/Makefile
+++ b/drivers/soc/fsl/qe/Makefile
@@ -1,7 +1,7 @@
#
# Makefile for the linux ppc-specific parts of QE
#
-obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o
+obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_io.o
obj-$(CONFIG_CPM) += qe_common.o
obj-$(CONFIG_UCC) += ucc.o
obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c
deleted file mode 100644
index ec2ca86..0000000
--- a/drivers/soc/fsl/qe/qe_ic.c
+++ /dev/null
@@ -1,512 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/qe_ic.c
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <le...@freescale.com>
- * Based on code from Shlomi Gridish <grid...@freescale.com>
- *
- * QUICC ENGINE Interrupt Controller
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <soc/fsl/qe/qe_ic.h>
-
-#include "qe_ic.h"
-
-static DEFINE_RAW_SPINLOCK(qe_ic_lock);
-
-static struct qe_ic_info qe_ic_info[] = {
- [1] = {
- .mask = 0x00008000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 0,
- .pri_reg = QEIC_CIPWCC,
- },
- [2] = {
- .mask = 0x00004000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 1,
- .pri_reg = QEIC_CIPWCC,
- },
- [3] = {
- .mask = 0x00002000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 2,
- .pri_reg = QEIC_CIPWCC,
- },
- [10] = {
- .mask = 0x00000040,
- .mask_reg = QEIC_CIMR,
- .pri_code = 1,
- .pri_reg = QEIC_CIPZCC,
- },
- [11] = {
- .mask = 0x00000020,
- .mask_reg = QEIC_CIMR,
- .pri_code = 2,
- .pri_reg = QEIC_CIPZCC,
- },
- [12] = {
- .mask = 0x00000010,
- .mask_reg = QEIC_CIMR,
- .pri_code = 3,
- .pri_reg = QEIC_CIPZCC,
- },
- [13] = {
- .mask = 0x00000008,
- .mask_reg = QEIC_CIMR,
- .pri_code = 4,
- .pri_reg = QEIC_CIPZCC,
- },
- [14] = {
- .mask = 0x00000004,
- .mask_reg = QEIC_CIMR,
- .pri_code = 5,
- .pri_reg = QEIC_CIPZCC,
- },
- [15] = {
- .mask = 0x00000002,
- .mask_reg = QEIC_CIMR,
- .pri_code = 6,
- .pri_reg = QEIC_CIPZCC,
- },
- [20] = {
- .mask = 0x10000000,
- .mask_reg = QEIC_CRIMR,
- .pri_code = 3,
- .pri_reg = QEIC_CIPRTA,
- },
- [25] = {
- .mask = 0x00800000,
- .mask_reg = QEIC_CRIMR,
- .pri_code = 0,
- .pri_reg = QEIC_CIPRTB,
- },
- [26] = {
- .mask = 0x00400000,
- .mask_reg = QEIC_CRIMR,
- .pri_code = 1,
- .pri_reg = QEIC_CIPRTB,
- },
- [27] = {
- .mask = 0x00200000,
- .mask_reg = QEIC_CRIMR,
- .pri_code = 2,
- .pri_reg = QEIC_CIPRTB,
- },
- [28] = {
- .mask = 0x00100000,
- .mask_reg = QEIC_CRIMR,
- .pri_code = 3,
- .pri_reg = QEIC_CIPRTB,
- },
- [32] = {
- .mask = 0x80000000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 0,
- .pri_reg = QEIC_CIPXCC,
- },
- [33] = {
- .mask = 0x40000000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 1,
- .pri_reg = QEIC_CIPXCC,
- },
- [34] = {
- .mask = 0x20000000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 2,
- .pri_reg = QEIC_CIPXCC,
- },
- [35] = {
- .mask = 0x10000000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 3,
- .pri_reg = QEIC_CIPXCC,
- },
- [36] = {
- .mask = 0x08000000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 4,
- .pri_reg = QEIC_CIPXCC,
- },
- [40] = {
- .mask = 0x00800000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 0,
- .pri_reg = QEIC_CIPYCC,
- },
- [41] = {
- .mask = 0x00400000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 1,
- .pri_reg = QEIC_CIPYCC,
- },
- [42] = {
- .mask = 0x00200000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 2,
- .pri_reg = QEIC_CIPYCC,
- },
- [43] = {
- .mask = 0x00100000,
- .mask_reg = QEIC_CIMR,
- .pri_code = 3,
- .pri_reg = QEIC_CIPYCC,
- },
-};
-
-static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg)
-{
- return in_be32(base + (reg >> 2));
-}
-
-static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int
reg,
- u32 value)
-{
- out_be32(base + (reg >> 2), value);
-}
-
-static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
-{
- return irq_get_chip_data(virq);
-}
-
-static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
-{
- return irq_data_get_irq_chip_data(d);
-}
-
-static void qe_ic_unmask_irq(struct irq_data *d)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
- unsigned int src = irqd_to_hwirq(d);
- unsigned long flags;
- u32 temp;
-
- raw_spin_lock_irqsave(&qe_ic_lock, flags);
-
- temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
- qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
- temp | qe_ic_info[src].mask);
-
- raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static void qe_ic_mask_irq(struct irq_data *d)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
- unsigned int src = irqd_to_hwirq(d);
- unsigned long flags;
- u32 temp;
-
- raw_spin_lock_irqsave(&qe_ic_lock, flags);
-
- temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
- qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
- temp & ~qe_ic_info[src].mask);
-
- /* Flush the above write before enabling interrupts; otherwise,
- * spurious interrupts will sometimes happen. To be 100% sure
- * that the write has reached the device before interrupts are
- * enabled, the mask register would have to be read back; however,
- * this is not required for correctness, only to avoid wasting
- * time on a large number of spurious interrupts. In testing,
- * a sync reduced the observed spurious interrupts to zero.
- */
- mb();
-
- raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static struct irq_chip qe_ic_irq_chip = {
- .name = "QEIC",
- .irq_unmask = qe_ic_unmask_irq,
- .irq_mask = qe_ic_mask_irq,
- .irq_mask_ack = qe_ic_mask_irq,
-};
-
-static int qe_ic_host_match(struct irq_domain *h, struct device_node *node,
- enum irq_domain_bus_token bus_token)
-{
- /* Exact match, unless qe_ic node is NULL */
- struct device_node *of_node = irq_domain_get_of_node(h);
- return of_node == NULL || of_node == node;
-}
-
-static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
-{
- struct qe_ic *qe_ic = h->host_data;
- struct irq_chip *chip;
-
- if (hw >= ARRAY_SIZE(qe_ic_info)) {
- pr_err("%s: Invalid hw irq number for QEIC\n", __func__);
- return -EINVAL;
- }
-
- if (qe_ic_info[hw].mask == 0) {
- printk(KERN_ERR "Can't map reserved IRQ\n");
- return -EINVAL;
- }
- /* Default chip */
- chip = &qe_ic->hc_irq;
-
- irq_set_chip_data(virq, qe_ic);
- irq_set_status_flags(virq, IRQ_LEVEL);
-
- irq_set_chip_and_handler(virq, chip, handle_level_irq);
-
- return 0;
-}
-
-static const struct irq_domain_ops qe_ic_host_ops = {
- .match = qe_ic_host_match,
- .map = qe_ic_host_map,
- .xlate = irq_domain_xlate_onetwocell,
-};
-
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
-{
- int irq;
-
- BUG_ON(qe_ic == NULL);
-
- /* get the interrupt source vector. */
- irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
-
- if (irq == 0)
- return NO_IRQ;
-
- return irq_linear_revmap(qe_ic->irqhost, irq);
-}
-
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-{
- int irq;
-
- BUG_ON(qe_ic == NULL);
-
- /* get the interrupt source vector. */
- irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
-
- if (irq == 0)
- return NO_IRQ;
-
- return irq_linear_revmap(qe_ic->irqhost, irq);
-}
-
-void __init qe_ic_init(struct device_node *node, unsigned int flags,
- void (*low_handler)(struct irq_desc *desc),
- void (*high_handler)(struct irq_desc *desc))
-{
- struct qe_ic *qe_ic;
- struct resource res;
- u32 temp = 0, ret, high_active = 0;
-
- ret = of_address_to_resource(node, 0, &res);
- if (ret)
- return;
-
- qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
- if (qe_ic == NULL)
- return;
-
- qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
- &qe_ic_host_ops, qe_ic);
- if (qe_ic->irqhost == NULL) {
- kfree(qe_ic);
- return;
- }
-
- qe_ic->regs = ioremap(res.start, resource_size(&res));
-
- qe_ic->hc_irq = qe_ic_irq_chip;
-
- qe_ic->virq_high = irq_of_parse_and_map(node, 0);
- qe_ic->virq_low = irq_of_parse_and_map(node, 1);
-
- if (qe_ic->virq_low == NO_IRQ) {
- printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
- kfree(qe_ic);
- return;
- }
-
- /* default priority scheme is grouped. If spread mode is */
- /* required, configure cicr accordingly. */
- if (flags & QE_IC_SPREADMODE_GRP_W)
- temp |= CICR_GWCC;
- if (flags & QE_IC_SPREADMODE_GRP_X)
- temp |= CICR_GXCC;
- if (flags & QE_IC_SPREADMODE_GRP_Y)
- temp |= CICR_GYCC;
- if (flags & QE_IC_SPREADMODE_GRP_Z)
- temp |= CICR_GZCC;
- if (flags & QE_IC_SPREADMODE_GRP_RISCA)
- temp |= CICR_GRTA;
- if (flags & QE_IC_SPREADMODE_GRP_RISCB)
- temp |= CICR_GRTB;
-
- /* choose destination signal for highest priority interrupt */
- if (flags & QE_IC_HIGH_SIGNAL) {
- temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
- high_active = 1;
- }
-
- qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-
- irq_set_handler_data(qe_ic->virq_low, qe_ic);
- irq_set_chained_handler(qe_ic->virq_low, low_handler);
-
- if (qe_ic->virq_high != NO_IRQ &&
- qe_ic->virq_high != qe_ic->virq_low) {
- irq_set_handler_data(qe_ic->virq_high, qe_ic);
- irq_set_chained_handler(qe_ic->virq_high, high_handler);
- }
-}
-
-void qe_ic_set_highest_priority(unsigned int virq, int high)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq(virq);
- unsigned int src = virq_to_hw(virq);
- u32 temp = 0;
-
- temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
-
- temp &= ~CICR_HP_MASK;
- temp |= src << CICR_HP_SHIFT;
-
- temp &= ~CICR_HPIT_MASK;
- temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
-
- qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-}
-
-/* Set Priority level within its group, from 1 to 8 */
-int qe_ic_set_priority(unsigned int virq, unsigned int priority)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq(virq);
- unsigned int src = virq_to_hw(virq);
- u32 temp;
-
- if (priority > 8 || priority == 0)
- return -EINVAL;
- if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
- "%s: Invalid hw irq number for QEIC\n", __func__))
- return -EINVAL;
- if (qe_ic_info[src].pri_reg == 0)
- return -EINVAL;
-
- temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
-
- if (priority < 4) {
- temp &= ~(0x7 << (32 - priority * 3));
- temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
- } else {
- temp &= ~(0x7 << (24 - priority * 3));
- temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
- }
-
- qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
-
- return 0;
-}
-
-/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq(virq);
- unsigned int src = virq_to_hw(virq);
- u32 temp, control_reg = QEIC_CICNR, shift = 0;
-
- if (priority > 2 || priority == 0)
- return -EINVAL;
- if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
- "%s: Invalid hw irq number for QEIC\n", __func__))
- return -EINVAL;
-
- switch (qe_ic_info[src].pri_reg) {
- case QEIC_CIPZCC:
- shift = CICNR_ZCC1T_SHIFT;
- break;
- case QEIC_CIPWCC:
- shift = CICNR_WCC1T_SHIFT;
- break;
- case QEIC_CIPYCC:
- shift = CICNR_YCC1T_SHIFT;
- break;
- case QEIC_CIPXCC:
- shift = CICNR_XCC1T_SHIFT;
- break;
- case QEIC_CIPRTA:
- shift = CRICR_RTA1T_SHIFT;
- control_reg = QEIC_CRICR;
- break;
- case QEIC_CIPRTB:
- shift = CRICR_RTB1T_SHIFT;
- control_reg = QEIC_CRICR;
- break;
- default:
- return -EINVAL;
- }
-
- shift += (2 - priority) * 2;
- temp = qe_ic_read(qe_ic->regs, control_reg);
- temp &= ~(SIGNAL_MASK << shift);
- temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
- qe_ic_write(qe_ic->regs, control_reg, temp);
-
- return 0;
-}
-
-static struct bus_type qe_ic_subsys = {
- .name = "qe_ic",
- .dev_name = "qe_ic",
-};
-
-static struct device device_qe_ic = {
- .id = 0,
- .bus = &qe_ic_subsys,
-};
-
-static int __init init_qe_ic_sysfs(void)
-{
- int rc;
-
- printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
-
- rc = subsys_system_register(&qe_ic_subsys, NULL);
- if (rc) {
- printk(KERN_ERR "Failed registering qe_ic sys class\n");
- return -ENODEV;
- }
- rc = device_register(&device_qe_ic);
- if (rc) {
- printk(KERN_ERR "Failed registering qe_ic sys device\n");
- return -ENODEV;
- }
- return 0;
-}
-
-subsys_initcall(init_qe_ic_sysfs);
diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h
deleted file mode 100644
index 926a2ed..0000000
--- a/drivers/soc/fsl/qe/qe_ic.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * drivers/soc/fsl/qe/qe_ic.h
- *
- * QUICC ENGINE Interrupt Controller Header
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <le...@freescale.com>
- * Based on code from Shlomi Gridish <grid...@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef _POWERPC_SYSDEV_QE_IC_H
-#define _POWERPC_SYSDEV_QE_IC_H
-
-#include <soc/fsl/qe/qe_ic.h>
-
-#define NR_QE_IC_INTS 64
-
-/* QE IC registers offset */
-#define QEIC_CICR 0x00
-#define QEIC_CIVEC 0x04
-#define QEIC_CRIPNR 0x08
-#define QEIC_CIPNR 0x0c
-#define QEIC_CIPXCC 0x10
-#define QEIC_CIPYCC 0x14
-#define QEIC_CIPWCC 0x18
-#define QEIC_CIPZCC 0x1c
-#define QEIC_CIMR 0x20
-#define QEIC_CRIMR 0x24
-#define QEIC_CICNR 0x28
-#define QEIC_CIPRTA 0x30
-#define QEIC_CIPRTB 0x34
-#define QEIC_CRICR 0x3c
-#define QEIC_CHIVEC 0x60
-
-/* Interrupt priority registers */
-#define CIPCC_SHIFT_PRI0 29
-#define CIPCC_SHIFT_PRI1 26
-#define CIPCC_SHIFT_PRI2 23
-#define CIPCC_SHIFT_PRI3 20
-#define CIPCC_SHIFT_PRI4 13
-#define CIPCC_SHIFT_PRI5 10
-#define CIPCC_SHIFT_PRI6 7
-#define CIPCC_SHIFT_PRI7 4
-
-/* CICR priority modes */
-#define CICR_GWCC 0x00040000
-#define CICR_GXCC 0x00020000
-#define CICR_GYCC 0x00010000
-#define CICR_GZCC 0x00080000
-#define CICR_GRTA 0x00200000
-#define CICR_GRTB 0x00400000
-#define CICR_HPIT_SHIFT 8
-#define CICR_HPIT_MASK 0x00000300
-#define CICR_HP_SHIFT 24
-#define CICR_HP_MASK 0x3f000000
-
-/* CICNR */
-#define CICNR_WCC1T_SHIFT 20
-#define CICNR_ZCC1T_SHIFT 28
-#define CICNR_YCC1T_SHIFT 12
-#define CICNR_XCC1T_SHIFT 4
-
-/* CRICR */
-#define CRICR_RTA1T_SHIFT 20
-#define CRICR_RTB1T_SHIFT 28
-
-/* Signal indicator */
-#define SIGNAL_MASK 3
-#define SIGNAL_HIGH 2
-#define SIGNAL_LOW 0
-
-struct qe_ic {
- /* Control registers offset */
- volatile u32 __iomem *regs;
-
- /* The remapper for this QEIC */
- struct irq_domain *irqhost;
-
- /* The "linux" controller struct */
- struct irq_chip hc_irq;
-
- /* VIRQ numbers of QE high/low irqs */
- unsigned int virq_high;
- unsigned int virq_low;
-};
-
-/*
- * QE interrupt controller internal structure
- */
-struct qe_ic_info {
- u32 mask; /* location of this source at the QIMR register. */
- u32 mask_reg; /* Mask register offset */
- u8 pri_code; /* for grouped interrupts sources - the interrupt
- code as appears at the group priority register */
- u32 pri_reg; /* Group priority register offset */
-};
-
-#endif /* _POWERPC_SYSDEV_QE_IC_H */
--
2.1.0.27.g96db324
