On Thu 2017-11-09 22:29:45, Pali Rohár wrote:
> On Thursday 09 November 2017 22:06:15 Pavel Machek wrote:
> > diff --git a/drivers/power/supply/bq27xxx_battery.c
> > b/drivers/power/supply/bq27xxx_battery.c
> > index ed44439..ee2851a 100644
> > --- a/drivers/power/supply/bq27xxx_battery.c
> > +++ b/drivers/power/supply/bq27xxx_battery.c
> > @@ -381,6 +381,30 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
> > [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
> > BQ27XXX_DM_REG_ROWS,
> > },
> > + [BQ27521] = { /* FIXME */
> > + [BQ27XXX_REG_CTRL] = 0x02,
> > + [BQ27XXX_REG_TEMP] = 0x0a,
> > + [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
> > + [BQ27XXX_REG_VOLT] = 0x0c,
> > + [BQ27XXX_REG_AI] = 0x0e,
> > + [BQ27XXX_REG_FLAGS] = 0x08,
> > + [BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
> > + [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
> > + [BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
> > + [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
> > + [BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
> > + [BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
> > + [BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
> > + [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
> > + [BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
> > + [BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
> > + [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
> > + [BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
> > + [BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
> > + [BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
> > + [BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
> > + [BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
> > + },
> > [BQ27530] = {
> > [BQ27XXX_REG_CTRL] = 0x00,
> > [BQ27XXX_REG_TEMP] = 0x06,
>
> Hi! IIRC those registers are valid only for sn27521 chip in revision 14
> (or new). For older revision is used different register map. And
> detection of chip revision is somehow possible via some registers.
Yes, I know.. I even had this, but as I can't test it, and early N950
samples should be very very rare, I'd prefer the patch as is.
@@ -1905,6 +1940,23 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
dev_info(di->dev, "support ver. %s enabled\n", DRIVER_VERSION);
+ if (di->chip == BQ27521) {
+ int val;
+ val = di->bus.read(di, 0x32, false);
+ if (val == 0x2100) {
+ printk("rev. 13 chip detected; add support\n");
+ /* https://elinux.org/N950 has details */
+ return PTR_ERR(ENODEV);
+ }
+
+ val = di->bus.read(di, 0x34, false);
+ if ((val & 0xff00) != 0x2100) {
+ printk("rev. 14 chip not detected?!\n");
+ return PTR_ERR(EINVAL);
+ }
+ printk("verified chip rev. 14\n");
+ }
+
bq27xxx_battery_settings(di);
bq27xxx_battery_update(di);
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
signature.asc
Description: Digital signature
