Hi Rob,
> Am 15.11.2017 um 21:17 schrieb Rob Herring <[email protected]>:
>
> On Sun, Nov 12, 2017 at 09:59:56PM +0100, H. Nikolaus Schaller wrote:
>> Add driver for Wi2Wi W2SG0004/84 GPS module connected through uart.
>>
>> Use serdev API hooks to monitor and forward the UART traffic to /dev/GPSn
>> and turn on/off the module. It also detects if the module is turned on
>> (sends data)
>> but should be off, e.g. if it was already turned on during boot or
>> power-on-reset.
>>
>> Additionally, rfkill block/unblock can be used to control an external LNA
>> (and power down the module if not needed).
>>
>> The driver concept is based on code developed by NeilBrown <[email protected]>
>> but simplified and adapted to use the new serdev API introduced in 4.11.
>>
>> Signed-off-by: H. Nikolaus Schaller <[email protected]>
>> ---
>> drivers/misc/Kconfig | 10 +
>> drivers/misc/Makefile | 1 +
>> drivers/misc/w2sg0004.c | 565
>> +++++++++++++++++++++++++++++++++++++++++++++++
>> include/linux/w2sg0004.h | 27 +++
>> 4 files changed, 603 insertions(+)
>> create mode 100644 drivers/misc/w2sg0004.c
>> create mode 100644 include/linux/w2sg0004.h
>>
>> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
>> index 8136dc7e863d..09d171d68408 100644
>> --- a/drivers/misc/Kconfig
>> +++ b/drivers/misc/Kconfig
>> @@ -518,4 +518,14 @@ source "drivers/misc/mic/Kconfig"
>> source "drivers/misc/genwqe/Kconfig"
>> source "drivers/misc/echo/Kconfig"
>> source "drivers/misc/cxl/Kconfig"
>> +
>> +config W2SG0004
>> + tristate "W2SG00x4 on/off control"
>> + depends on GPIOLIB && SERIAL_DEV_BUS
>> + help
>> + Enable on/off control of W2SG00x4 GPS moduled connected
>> + to some SoC UART to allow powering up/down if the /dev/ttyGPSn
>> + is opened/closed.
>> + It also provides a rfkill gps name to control the LNA power.
>> +
>> endmenu
>> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
>> index ad0e64fdba34..abcb667e0ff0 100644
>> --- a/drivers/misc/Makefile
>> +++ b/drivers/misc/Makefile
>> @@ -51,6 +51,7 @@ obj-$(CONFIG_SRAM_EXEC) += sram-exec.o
>> obj-y += mic/
>> obj-$(CONFIG_GENWQE) += genwqe/
>> obj-$(CONFIG_ECHO) += echo/
>> +obj-$(CONFIG_W2SG0004) += w2sg0004.o
>> obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
>> obj-$(CONFIG_CXL_BASE) += cxl/
>> obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
>> diff --git a/drivers/misc/w2sg0004.c b/drivers/misc/w2sg0004.c
>> new file mode 100644
>> index 000000000000..55101aa6beeb
>> --- /dev/null
>> +++ b/drivers/misc/w2sg0004.c
>> @@ -0,0 +1,565 @@
>> +/*
>> + * w2sg0004.c
>
> Listing the filename is pointless IMO.
Ok.
> You need a license too. Use SPDX
> tag (on first line with C++ style comment).
Well, this is too new to be aware of...
Isn't the MODULE_LICENSE enough any more?
>
>> + * Driver for power controlling the w2sg0004/w2sg0084 GPS receiver.
>> + *
>> + * This receiver has an ON/OFF pin which must be toggled to
>> + * turn the device 'on' of 'off'. A high->low->high toggle
>> + * will switch the device on if it is off, and off if it is on.
>> + *
>> + * To enable receiving on/off requests we register with the
>> + * UART power management notifications.
>> + *
>> + * It is not possible to directly detect the state of the device.
>> + * However when it is on it will send characters on a UART line
>> + * regularly.
>> + *
>> + * To detect that the power state is out of sync (e.g. if GPS
>> + * was enabled before a reboot), we register for UART data received
>> + * notifications.
>> + *
>> + * In addition we register as a rfkill client so that we can
>> + * control the LNA power.
>> + *
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irq.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/rfkill.h>
>> +#include <linux/serdev.h>
>> +#include <linux/sched.h>
>> +#include <linux/slab.h>
>> +#include <linux/tty.h>
>> +#include <linux/tty_flip.h>
>> +#include <linux/w2sg0004.h>
>> +#include <linux/workqueue.h>
>> +
>> +/*
>> + * There seems to be restrictions on how quickly we can toggle the
>> + * on/off line. data sheets says "two rtc ticks", whatever that means.
>> + * If we do it too soon it doesn't work.
>> + * So we have a state machine which uses the common work queue to ensure
>> + * clean transitions.
>> + * When a change is requested we record that request and only act on it
>> + * once the previous change has completed.
>> + * A change involves a 10ms low pulse, and a 990ms raised level, so only
>> + * one change per second.
>> + */
>> +
>> +enum w2sg_state {
>> + W2SG_IDLE, /* is not changing state */
>> + W2SG_PULSE, /* activate on/off impulse */
>> + W2SG_NOPULSE /* deactivate on/off impulse */
>> +};
>> +
>> +struct w2sg_data {
>> + struct rfkill *rf_kill;
>> + struct regulator *lna_regulator;
>> + int lna_blocked; /* rfkill block gps active */
>> + int lna_is_off; /* LNA is currently off */
>> + int is_on; /* current state (0/1) */
>> + unsigned long last_toggle;
>> + unsigned long backoff; /* time to wait since last_toggle */
>> + int on_off_gpio; /* the on-off gpio number */
>> + struct serdev_device *uart; /* uart connected to the chip */
>> + struct tty_driver *tty_drv; /* this is the user space tty */
>> + struct device *dev; /* from tty_port_register_device() */
>> + struct tty_port port;
>> + int open_count; /* how often we were opened */
>> + enum w2sg_state state;
>> + int requested; /* requested state (0/1) */
>> + int suspended;
>> + struct delayed_work work;
>> + int discard_count;
>> +};
>> +
>> +static struct w2sg_data *w2sg_by_minor[1];
>> +
>> +static int w2sg_set_lna_power(struct w2sg_data *data)
>> +{
>> + int ret = 0;
>> + int off = data->suspended || !data->requested || data->lna_blocked;
>> +
>> + pr_debug("%s: %s\n", __func__, off ? "off" : "on");
>> +
>> + if (off != data->lna_is_off) {
>> + data->lna_is_off = off;
>> + if (!IS_ERR_OR_NULL(data->lna_regulator)) {
>> + if (off)
>> + regulator_disable(data->lna_regulator);
>> + else
>> + ret = regulator_enable(data->lna_regulator);
>> + }
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static void w2sg_set_power(void *pdata, int val)
>> +{
>> + struct w2sg_data *data = (struct w2sg_data *) pdata;
>> +
>> + pr_debug("%s to state=%d (requested=%d)\n", __func__, val,
>> data->requested);
>> +
>> + if (val && !data->requested) {
>> + data->requested = true;
>> + } else if (!val && data->requested) {
>> + data->backoff = HZ;
>> + data->requested = false;
>> + } else
>> + return;
>> +
>> + pr_debug("w2sg00x4 scheduled for %d\n", data->requested);
>> +
>> + if (!data->suspended)
>> + schedule_delayed_work(&data->work, 0);
>> +}
>> +
>> +/* called each time data is received by the UART (i.e. sent by the
>> w2sg0004) */
>> +
>> +static int w2sg_uart_receive_buf(struct serdev_device *serdev,
>> + const unsigned char *rxdata,
>> + size_t count)
>> +{
>> + struct w2sg_data *data =
>> + (struct w2sg_data *) serdev_device_get_drvdata(serdev);
>> +
>> + if (!data->requested && !data->is_on) {
>> + /*
>> + * we have received characters while the w2sg
>> + * should have been be turned off
>> + */
>> + data->discard_count += count;
>> + if ((data->state == W2SG_IDLE) &&
>> + time_after(jiffies,
>> + data->last_toggle + data->backoff)) {
>> + /* Should be off by now, time to toggle again */
>> + pr_debug("w2sg00x4 has sent %d characters data although
>> it should be off!\n",
>> + data->discard_count);
>> +
>> + data->discard_count = 0;
>> +
>> + data->is_on = true;
>> + data->backoff *= 2;
>> + if (!data->suspended)
>> + schedule_delayed_work(&data->work, 0);
>> + }
>> + } else if (data->open_count > 0) {
>> + int n;
>> +
>> + pr_debug("w2sg00x4: push %d chars to tty port\n", count);
>> +
>> + /* pass to user-space */
>> + n = tty_insert_flip_string(&data->port, rxdata, count);
>> + if (n != count)
>> + pr_err("w2sg00x4: did loose %d characters\n", count -
>> n);
>> + tty_flip_buffer_push(&data->port);
>> + return n;
>> + }
>> +
>> + /* assume we have processed everything */
>> + return count;
>> +}
>> +
>> +/* try to toggle the power state by sending a pulse to the on-off GPIO */
>> +
>> +static void toggle_work(struct work_struct *work)
>> +{
>> + struct w2sg_data *data = container_of(work, struct w2sg_data,
>> + work.work);
>> +
>> + switch (data->state) {
>> + case W2SG_IDLE:
>> + if (data->requested == data->is_on)
>> + return;
>> +
>> + w2sg_set_lna_power(data); /* update LNA power state */
>> + gpio_set_value_cansleep(data->on_off_gpio, 0);
>> + data->state = W2SG_PULSE;
>> +
>> + pr_debug("w2sg: power gpio ON\n");
>> +
>> + schedule_delayed_work(&data->work,
>> + msecs_to_jiffies(10));
>> + break;
>> +
>> + case W2SG_PULSE:
>> + gpio_set_value_cansleep(data->on_off_gpio, 1);
>> + data->last_toggle = jiffies;
>> + data->state = W2SG_NOPULSE;
>> + data->is_on = !data->is_on;
>> +
>> + pr_debug("w2sg: power gpio OFF\n");
>> +
>> + schedule_delayed_work(&data->work,
>> + msecs_to_jiffies(10));
>> + break;
>> +
>> + case W2SG_NOPULSE:
>> + data->state = W2SG_IDLE;
>> +
>> + pr_debug("w2sg: idle\n");
>> +
>> + break;
>> +
>> + }
>> +}
>> +
>> +static int w2sg_rfkill_set_block(void *pdata, bool blocked)
>> +{
>> + struct w2sg_data *data = pdata;
>> +
>> + pr_debug("%s: blocked: %d\n", __func__, blocked);
>> +
>> + data->lna_blocked = blocked;
>> +
>> + return w2sg_set_lna_power(data);
>> +}
>> +
>> +static struct rfkill_ops w2sg0004_rfkill_ops = {
>> + .set_block = w2sg_rfkill_set_block,
>> +};
>> +
>> +static struct serdev_device_ops serdev_ops = {
>> + .receive_buf = w2sg_uart_receive_buf,
>> +};
>> +
>> +/*
>> + * we are a man-in the middle between the user-space visible tty port
>> + * and the serdev tty where the chip is connected.
>> + * This allows us to recognise when the device should be powered on
>> + * or off and handle the "false" state that data arrives while no
>> + * users-space tty client exists.
>> + */
>> +
>> +static struct w2sg_data *w2sg_get_by_minor(unsigned int minor)
>> +{
>> + return w2sg_by_minor[minor];
>> +}
>> +
>> +static int w2sg_tty_install(struct tty_driver *driver, struct tty_struct
>> *tty)
>> +{
>> + struct w2sg_data *data;
>> + int retval;
>> +
>> + pr_debug("%s() tty = %p\n", __func__, tty);
>> +
>> + data = w2sg_get_by_minor(tty->index);
>> +
>> + if (!data)
>> + return -ENODEV;
>> +
>> + retval = tty_standard_install(driver, tty);
>> + if (retval)
>> + goto error_init_termios;
>> +
>> + tty->driver_data = data;
>> +
>> + return 0;
>> +
>> +error_init_termios:
>> + tty_port_put(&data->port);
>> + return retval;
>> +}
>> +
>> +static int w2sg_tty_open(struct tty_struct *tty, struct file *file)
>> +{
>> + struct w2sg_data *data = tty->driver_data;
>> +
>> + pr_debug("%s() data = %p open_count = ++%d\n", __func__, data,
>> data->open_count);
>> +
>> + w2sg_set_power(data, ++data->open_count > 0);
>> +
>> + return tty_port_open(&data->port, tty, file);
>> +}
>> +
>> +static void w2sg_tty_close(struct tty_struct *tty, struct file *file)
>> +{
>> + struct w2sg_data *data = tty->driver_data;
>> +
>> + pr_debug("%s()\n", __func__);
>> +
>> + w2sg_set_power(data, --data->open_count > 0);
>> +
>> + tty_port_close(&data->port, tty, file);
>> +}
>> +
>> +static int w2sg_tty_write(struct tty_struct *tty,
>> + const unsigned char *buffer, int count)
>> +{
>> + struct w2sg_data *data = tty->driver_data;
>> +
>> + /* simply pass down to UART */
>> + return serdev_device_write_buf(data->uart, buffer, count);
>> +}
>> +
>> +
>> +static const struct tty_operations w2sg_serial_ops = {
>> + .install = w2sg_tty_install,
>> + .open = w2sg_tty_open,
>> + .close = w2sg_tty_close,
>> + .write = w2sg_tty_write,
>> +};
>> +
>> +static const struct tty_port_operations w2sg_port_ops = {
>> +};
>> +
>> +static int w2sg_probe(struct serdev_device *serdev)
>> +{
>> + struct w2sg_pdata *pdata = NULL;
>> + struct w2sg_data *data;
>> + struct rfkill *rf_kill;
>> + int err;
>> + int minor;
>> +
>> + pr_debug("%s()\n", __func__);
>> +
>> + minor = 0;
>> + if (w2sg_by_minor[minor]) {
>> + pr_err("w2sg minor is already in use!\n");
>> + return -ENODEV;
>> + }
>> +
>> + if (serdev->dev.of_node) {
>> + struct device *dev = &serdev->dev;
>> + enum of_gpio_flags flags;
>> +
>> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
>> + if (!pdata)
>> + return -ENOMEM;
>> +
>> + pdata->on_off_gpio = of_get_named_gpio_flags(dev->of_node,
>> + "enable-gpios", 0,
>> + &flags);
>> +
>> + /* defer until we have all gpios */
>> + if (pdata->on_off_gpio == -EPROBE_DEFER)
>> + return -EPROBE_DEFER;
>> +
>> + pdata->lna_regulator = devm_regulator_get_optional(dev, "lna");
>> + if (IS_ERR(pdata->lna_regulator)) {
>> + /* defer until we can get the regulator */
>> + if (PTR_ERR(pdata->lna_regulator) == -EPROBE_DEFER)
>> + return -EPROBE_DEFER;
>> +
>> + pdata->lna_regulator = NULL;
>> + }
>> +
>> + pr_debug("%s() lna_regulator = %p\n", __func__,
>> + pdata->lna_regulator);
>> +
>> + serdev->dev.platform_data = pdata;
>> + }
>> +
>> + data = devm_kzalloc(&serdev->dev, sizeof(*data), GFP_KERNEL);
>> + if (data == NULL)
>> + return -ENOMEM;
>> +
>> + w2sg_by_minor[minor] = data;
>> +
>> + serdev_device_set_drvdata(serdev, data);
>> +
>> + data->lna_regulator = pdata->lna_regulator;
>
> NULL ptr dereference if you have no of_node.
has more or less already commented by Arnd and will be fixed in PATCH v4.
>
>> + data->lna_blocked = true;
>> + data->lna_is_off = true;
>> +
>> + data->on_off_gpio = pdata->on_off_gpio;
>> +
>> + data->is_on = false;
>> + data->requested = false;
>> + data->state = W2SG_IDLE;
>> + data->last_toggle = jiffies;
>> + data->backoff = HZ;
>> +
>> + data->uart = serdev;
>> +
>> + INIT_DELAYED_WORK(&data->work, toggle_work);
>> +
>> + err = devm_gpio_request(&serdev->dev, data->on_off_gpio,
>> + "w2sg0004-on-off");
>> + if (err < 0)
>> + goto out;
>> +
>> + gpio_direction_output(data->on_off_gpio, false);
>> +
>> + serdev_device_set_client_ops(data->uart, &serdev_ops);
>> + serdev_device_open(data->uart);
>> +
>> + serdev_device_set_baudrate(data->uart, 9600);
>> + serdev_device_set_flow_control(data->uart, false);
>> +
>> + rf_kill = rfkill_alloc("GPS", &serdev->dev, RFKILL_TYPE_GPS,
>> + &w2sg0004_rfkill_ops, data);
>> + if (rf_kill == NULL) {
>> + err = -ENOMEM;
>> + goto err_rfkill;
>> + }
>> +
>> + err = rfkill_register(rf_kill);
>> + if (err) {
>> + dev_err(&serdev->dev, "Cannot register rfkill device\n");
>> + goto err_rfkill;
>> + }
>> +
>> + data->rf_kill = rf_kill;
>> +
>> + /* allocate the tty driver */
>> + data->tty_drv = alloc_tty_driver(1);
>
> Is there an advantage or reason to make this a tty driver rather than
> just a char driver?
Well, gpsd and other daemons might assume they can tcsetattr or a line
discipline etc.
>
> Perhaps this should be under drivers/tty if it is a tty driver.
Well, primarily it is a gps driver... And in some bright future there
should be specific gps interfaces (like networking or bluetooth).
But there is no drivers/gps and I am not sure if this one should be the
first. If you prefer it, it is a simple rename...
>
>> + if (!data->tty_drv)
>> + return -ENOMEM;
>> +
>> + /* initialize the tty driver */
>> + data->tty_drv->owner = THIS_MODULE;
>> + data->tty_drv->driver_name = "w2sg0004";
>> + data->tty_drv->name = "ttyGPS";
>> + data->tty_drv->major = 0;
>> + data->tty_drv->minor_start = 0;
>> + data->tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
>> + data->tty_drv->subtype = SERIAL_TYPE_NORMAL;
>> + data->tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
>> + data->tty_drv->init_termios = tty_std_termios;
>> + data->tty_drv->init_termios.c_cflag = B9600 | CS8 | CREAD |
>> + HUPCL | CLOCAL;
>> + /*
>> + * optional:
>> + * tty_termios_encode_baud_rate(&data->tty_drv->init_termios,
>> + 115200, 115200);
>> + * w2sg_tty_termios(&data->tty_drv->init_termios);
>> + */
>> + tty_set_operations(data->tty_drv, &w2sg_serial_ops);
>> +
>> + /* register the tty driver */
>> + err = tty_register_driver(data->tty_drv);
>> + if (err) {
>> + pr_err("%s - tty_register_driver failed(%d)\n",
>> + __func__, err);
>> + put_tty_driver(data->tty_drv);
>> + goto err_rfkill;
>> + }
>> +
>> + tty_port_init(&data->port);
>> + data->port.ops = &w2sg_port_ops;
>> +
>> +/*
>> + * FIXME: this appears to reenter this probe() function a second time
>> + * which only fails because the gpio is already assigned
>> + */
>> +
>> + data->dev = tty_port_register_device(&data->port,
>> + data->tty_drv, minor, &serdev->dev);
>> +
>> + pr_debug("w2sg probed\n");
>> +
>> + /* keep off until user space requests the device */
>> + w2sg_set_power(data, false);
>> +
>> + return 0;
>> +
>> +err_rfkill:
>> + rfkill_destroy(rf_kill);
>> + serdev_device_close(data->uart);
>> +out:
>> + return err;
>> +}
>> +
>> +static void w2sg_remove(struct serdev_device *serdev)
>> +{
>> + struct w2sg_data *data = serdev_device_get_drvdata(serdev);
>> + int minor;
>> +
>> + cancel_delayed_work_sync(&data->work);
>> +
>> + /* what is the right sequence to avoid problems? */
>> + serdev_device_close(data->uart);
>> +
>> + minor = 0;
>> + tty_unregister_device(data->tty_drv, minor);
>> +
>> + tty_unregister_driver(data->tty_drv);
>> +}
>> +
>> +static int w2sg_suspend(struct device *dev)
>> +{
>> + struct w2sg_data *data = dev_get_drvdata(dev);
>> +
>> + data->suspended = true;
>> +
>> + cancel_delayed_work_sync(&data->work);
>> +
>> + w2sg_set_lna_power(data); /* shuts down if needed */
>> +
>> + if (data->state == W2SG_PULSE) {
>> + msleep(10);
>> + gpio_set_value_cansleep(data->on_off_gpio, 1);
>> + data->last_toggle = jiffies;
>> + data->is_on = !data->is_on;
>> + data->state = W2SG_NOPULSE;
>> + }
>> +
>> + if (data->state == W2SG_NOPULSE) {
>> + msleep(10);
>> + data->state = W2SG_IDLE;
>> + }
>> +
>> + if (data->is_on) {
>> + pr_info("GPS off for suspend %d %d %d\n", data->requested,
>> + data->is_on, data->lna_is_off);
>> +
>> + gpio_set_value_cansleep(data->on_off_gpio, 0);
>> + msleep(10);
>> + gpio_set_value_cansleep(data->on_off_gpio, 1);
>> + data->is_on = 0;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int w2sg_resume(struct device *dev)
>> +{
>> + struct w2sg_data *data = dev_get_drvdata(dev);
>> +
>> + data->suspended = false;
>> +
>> + pr_info("GPS resuming %d %d %d\n", data->requested,
>> + data->is_on, data->lna_is_off);
>> +
>> + schedule_delayed_work(&data->work, 0); /* enables LNA if needed */
>> +
>> + return 0;
>> +}
>> +
>> +#if defined(CONFIG_OF)
>> +static const struct of_device_id w2sg0004_of_match[] = {
>> + { .compatible = "wi2wi,w2sg0004" },
>> + { .compatible = "wi2wi,w2sg0084" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, w2sg0004_of_match);
>> +#endif
>> +
>> +SIMPLE_DEV_PM_OPS(w2sg_pm_ops, w2sg_suspend, w2sg_resume);
>> +
>> +static struct serdev_device_driver w2sg_driver = {
>> + .probe = w2sg_probe,
>> + .remove = w2sg_remove,
>> + .driver = {
>> + .name = "w2sg0004",
>> + .owner = THIS_MODULE,
>> + .pm = &w2sg_pm_ops,
>> + .of_match_table = of_match_ptr(w2sg0004_of_match)
>> + },
>> +};
>> +
>> +module_serdev_device_driver(w2sg_driver);
>> +
>> +MODULE_ALIAS("w2sg0004");
>> +
>> +MODULE_AUTHOR("NeilBrown <[email protected]>");
>> +MODULE_DESCRIPTION("w2sg0004 GPS power management driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/linux/w2sg0004.h b/include/linux/w2sg0004.h
>> new file mode 100644
>> index 000000000000..ad0c4a18e01d
>> --- /dev/null
>> +++ b/include/linux/w2sg0004.h
>> @@ -0,0 +1,27 @@
>> +/*
>> + * UART slave to allow ON/OFF control of w2sg0004 GPS receiver.
>> + *
>> + * Copyright (C) 2011 Neil Brown <[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * General Public License for more details.
>> + */
>> +
>> +
>> +
>> +#ifndef __LINUX_W2SG0004_H
>> +#define __LINUX_W2SG0004_H
>> +
>> +#include <linux/regulator/consumer.h>
>> +
>> +struct w2sg_pdata {
>
> You don't really support platform_data, so you can move this into the
> driver.
Yes, I am working on that as recommended by Arnd.
>
>> + struct regulator *lna_regulator; /* enable LNA power */
>> + int on_off_gpio; /* on-off input of the GPS module */
>> +};
>> +#endif /* __LINUX_W2SG0004_H */
>> --
>> 2.12.2
>>
BR and thanks,
Nikolaus
